Thanks, That was it, i copied them back and solved,


Chris

Having fixed one problem, i was so stupid to click and click update libraries :oops: :oops: :oops: :oops: :oops: :oops: :oops: :twisted: :twisted: :twisted: :twisted: i don't know which libraries i have updated buit ik get the following errors by uploading. Is there a overview which libraries and wh...

Grz3 Thanks 0x5a was there after reboot, of E12 It was the port 80 which caused the problem, i had the idea that it was related to the port of domoticz. But i understand now that its related to E12. But i can't technical place the function of this port variable to the microcontroller or pin layout o...

By tools i found this where to set the Ic2 address

No I2C devices found
I2C Addresses in use Known devices

Sorry still not, Where to check/Set the adres of i2c

Chris

By the way my hardware settings i defined I think its right ore......


Chris

AlL First thanks all for your reactions EasyESP already checked the Swap of GPI05 which is on port D1 and GPI04 on port D2 :!: Without succes I used the following layout of the esp8266-E12 NodeMCU__v1.0_pinout.jpg At grz3, what do you mean with use port 0, (GPI016)? in above layout an which pin is t...

Extra Screen out put of Easy ESP INIT : Normal boot WD : Uptime 0 ConnectFailures 0 FreeMem 27216 MLX90614 : Temperature: 1037.55 WD : Uptime 1 ConnectFailures 0 FreeMem 27152 MLX90614 : Temperature: 1037.55 WD : Uptime 1 ConnectFailures 0 FreeMem 26672 WD : Uptime 2 ConnectFailures 0 FreeMem 27072 ...

Done, even it past the value to domoticz [img] Screen%20Shot%202016-03-30%20at%2007.03.30.png [/img] Second screen out put o serial sketch of the following code http://www.esp8266.com/viewtopic.php?f=29&t=3683&p=29224&hilit=Mlx90614#p29224 Ambient = 21.73*C Object = 23.21*C Ambient = 21....

Thanks, This that is only now the strange thing the value in EasyESP is 1037.55 how ever running the script in the previous note i get a value back of 23 degree. Some one any idea what is going wrong


Chris

Hoi I am newbie in the forum, i managed to enable the Easyesp on my esp-e12 First compliments, really fancy, create job to all of you, who developed this.. I Am trying to get the MLX90614 active On Hardware of the EasyESP menu i enabled the SCL => GPi05 => d1 and SDA => GPI04 => D2 On device of the ...

I am new in the world of ESP, Some project i am working on on this moment - Cloud detection with the ESP8266E12 and MLX90614 - Feed it back to domoticz and emoncms already running based on uno - Telescope drive with Mega project Onstep and i am looking for thermostat solution based on ESP and domoti...