I created a nice enclosure for the WT32-ETH01 + Relays
see thingiverse.. https://www.thingiverse.com/thing:4750234
Search found 62 matches
- 04 Feb 2021, 21:38
- Forum: ESP Easy: Hardware
- Topic: WT32-ETH01
- Replies: 128
- Views: 175828
- 16 Sep 2018, 11:26
- Forum: ESP Easy: Software
- Topic: mqtt import disabled on reboot?
- Replies: 14
- Views: 6290
Re: mqtt import disabled on reboot?
thanks for the quick reply !
- 16 Sep 2018, 10:29
- Forum: ESP Easy: Software
- Topic: mqtt import disabled on reboot?
- Replies: 14
- Views: 6290
mqtt import disabled on reboot?
I notice on the latest nightly fw : ESP_Easy_mega-20180916_normal_ESP8266_4096 also ESP_Easy_mega-20180915_dev_ESP8266_4096
after a reboot mqtt import, the enable box becomes unchecked. tried on different devices with the same result?
after a reboot mqtt import, the enable box becomes unchecked. tried on different devices with the same result?
- 25 Aug 2018, 16:12
- Forum: ESP Easy: Software
- Topic: time server
- Replies: 4
- Views: 9789
Re: time server
I have the same issue, where the NTP loses time occasionally Hence I do not rely on it to use it I use a big timer in node red to post when its dark Capture.PNG this updates a dummy device as to whether its night or day I then use a rule to make the switch on porchlighton do if [dark#dark]=1 mcpgpio...
- 02 May 2018, 23:58
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 54866
Re: ESP-32 plans for ESPEasy (?)
within Platformio I can build esp32dev However i end up with an image with only a few devices esp32.png So being a novice and not knowing how to select the devices for the build I edited the Framed OLED 36 device added the Nextion content, renaming all references to 75 to 36 but this then fails when...
- 29 Apr 2018, 00:35
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 54866
Re: ESP-32 plans for ESPEasy (?)
any pointers how to compile a image for esp32 ?
- 16 Apr 2018, 19:25
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 54866
Re: ESP-32 plans for ESPEasy (?)
Latest esp32 version http://www.letscontrolit.com/downloads/ESPEasy32_R20100.zip seems very good and quite stable. I was wondering how to compile a version myself as I want to add a sensor [Nextion display] from the playground I tried and managed to create one in PlatformIO but the result only had ...
- 14 Apr 2018, 19:12
- Forum: ESP Easy: Software
- Topic: ESP-32 plans for ESPEasy (?)
- Replies: 58
- Views: 54866
Re: ESP-32 plans for ESPEasy (?)
Latest esp32 version http://www.letscontrolit.com/downloads/ESPEasy32_R20100.zip seems very good and quite stable. I was wondering how to compile a version myself as I want to add a sensor [Nextion display] from the playground I tried and managed to create one in PlatformIO but the result only had a...
- 21 Mar 2018, 23:21
- Forum: ESP Easy: Software
- Topic: Nextion display plugin
- Replies: 587
- Views: 2332621
Re: Nextion display plugin
I have trying for days now to get my nextion working as thermostat control I'm using the following on for the logic on the nextion for a up / increment button va0.val=va0.val+2 if(va0.val>9) { va1.val=va1.val+1 va0.val=va0.val-10 } if(va1.val>25) { va1.val=va3.val va0.val=va4.val } cov va0.val,t9.tx...
- 26 Feb 2017, 14:22
- Forum: ESP Easy: Software
- Topic: MPU6050 [SOLVED]
- Replies: 4
- Views: 5445
Re: MPU6050
Thanks Piet.. that worked
Much appreciated
Much appreciated
- 25 Feb 2017, 14:32
- Forum: ESP Easy: Software
- Topic: MPU6050 [SOLVED]
- Replies: 4
- Views: 5445
MPU6050 [SOLVED]
Hi, Please can someone help? I'm struggling to add a MPU6050 1. I downloaded the latest easy version - https://github.com/letscontrolit/ESPEasy (this includes MPU6050's) https://github.com/letscontrolit/ESPEasy/blob/master/_P118_MPU6050.ino 2. Uploaded from arduino v1.6.11 3. Once online I found no ...
- 11 Feb 2017, 07:05
- Forum: ESP Easy: General Discussion
- Topic: Sharp Dust Sensor GP2Y10------Domoticz
- Replies: 6
- Views: 11233
Re: Sharp Dust Sensor GP2Y10------Domoticz
I am using a custom dummy device where I have labelled the axis as microns.Ger wrote:The Sharp Dust Sensor uses an analog voltage.
You can choose percentage or voltage in Domoticz
- 03 Feb 2017, 19:05
- Forum: ESP Easy: General Discussion
- Topic: BMP180 How to send only one value?
- Replies: 3
- Views: 3679
Re: BMP180 How to send only one value?
you could always use node red to filter out the undesired value?
Set your ESP to send to mqtt
within node red use a 'switch node and apply a filter by using the contains option .. for instance contains idx":222
then add a change node, set the option to change and replace with what you require.
Set your ESP to send to mqtt
within node red use a 'switch node and apply a filter by using the contains option .. for instance contains idx":222
then add a change node, set the option to change and replace with what you require.
- 14 Jan 2017, 23:32
- Forum: ESP Easy: General Discussion
- Topic: Level_Control Device plugin21
- Replies: 12
- Views: 11168
Re: Level_Control Device plugin21
this is how I did it.. first create dummy device [img] Screenshot%20from%202017-01-14%2022-19-55.png [/img] then create a dummy thermostat in domoticz (I named this test-thermostat ) Create a lua script commandArray = {} if devicechanged['test-thermostat'] then DomDevice = 'test-thermostat' DomValue...
- 02 Jan 2017, 23:48
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 734933
Re: ESP Easy Mega
This Mega version is great?!
Just if anyone have an example of the rule to send notifications via the email client that they could share that would be much appreciated. Happy new year to everyone !
Just if anyone have an example of the rule to send notifications via the email client that they could share that would be much appreciated. Happy new year to everyone !
- 31 Dec 2016, 14:42
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 189929
Re: Arduino Easy 2560
I was having issues but after adding a micro sd card to the Ethernet shield its now working.. looks good !
- 27 Nov 2016, 20:30
- Forum: ESP Easy: Software
- Topic: ESP Easy next stable... (release candidates)
- Replies: 155
- Views: 122903
Re: ESP Easy next stable... (release candidates)
I've just been trying to update to r147 from 146 using OTA , but fails at 80% every time. anyone else with the same issue? this is happening on 5 different ESP's when I flash OTA from 146 to 147 at 80% fails on boot the logs show the following 308 : INIT : Booting Build nr:146 1195 : WIFI : Connecti...
- 10 Oct 2016, 21:28
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295891
Re: ESP Easy Releases
Not sure if its my setup but on R137
within config tab the admin password seems to over right the wpa key?
A feature of the chrome browser
within config tab the admin password seems to over right the wpa key?
A feature of the chrome browser
- 03 Oct 2016, 23:18
- Forum: ESP Easy: Projects / Applications
- Topic: Cases, casings, mounts, housings and 3D printing designs
- Replies: 10
- Views: 13344
Re: Cases, casings, mounts, housings and 3D printing designs
after some trial and error I managed to etch a double sided board I have a ESP201 (upgraded to 4Mb) surface mounted mcp23017 giving 8 (digital inputs) + 3 (relay outputs) + 2( 5v Outputs) using a ULN2803AG on the outputs ADS1115 giving 4 analogue inputs (one of which is wired to the 3.3v AMS1117) I ...
- 30 Sep 2016, 11:20
- Forum: ESP Easy: Hardware
- Topic: DHT-12 Humidity Temperature Sensor
- Replies: 3
- Views: 4394
Re: DHT-12 Humidity Temperature Sensor
thanks guys .. I see the option on the latest firmware..
- 28 Sep 2016, 10:05
- Forum: ESP Easy: Hardware
- Topic: DHT-12 Humidity Temperature Sensor
- Replies: 3
- Views: 4394
DHT-12 Humidity Temperature Sensor
I was wondering if there was any plan to add support for DHT12's
(these have an I2C interface) and greater accuracy than the 11's
https://hackspark.fr/en/dht-12-temperat ... ensor.html
(these have an I2C interface) and greater accuracy than the 11's
https://hackspark.fr/en/dht-12-temperat ... ensor.html
- 23 Sep 2016, 17:50
- Forum: ESP Easy: General Discussion
- Topic: Network
- Replies: 23
- Views: 17991
Re: Network
My ASUS RT-AC3200 has VPN Server / OpenVPN built in
makes it extremely easy to set up. Once connected I can access all my ESP's (15 in total) using their local ip address from anywhere.
makes it extremely easy to set up. Once connected I can access all my ESP's (15 in total) using their local ip address from anywhere.
- 09 Sep 2016, 20:22
- Forum: ESP Easy: Software
- Topic: Problems using rules
- Replies: 3
- Views: 4697
Re: Problems using rules
This is the rule I use to control my hot water On thermon do pcfgpio,3,0 //turn on endon On thermoff do pcfgpio,3,1 //turn off endon on Hotwater#Temperature<39 do if [dumb#Occupied]=1 if [dumb#Night]=0 event,thermon timerSet,1,200 endon On Rules#Timer=1 do if Boiler#Temperature<30 do TaskValueSet 10...
- 06 Sep 2016, 18:36
- Forum: ESP Easy: Hardware
- Topic: PWM fade up / down possible
- Replies: 1
- Views: 3374
Re: PWM fade up / down possible
Using the following fades GPIO 2 to level 0 over 1 second http://192.168.0.44/control?cmd=PWM,2,0,1000 Using the following fades GPIO 2 to 0 Using the following GPIO 2 to level 200 over 1 second http://192.168.0.44/control?cmd=PWM,2,200,1000 the following lua script in domoticz works really well. co...
- 17 Aug 2016, 22:26
- Forum: ESP Easy: Projects / Applications
- Topic: Dim up / down LED by a rule ?
- Replies: 3
- Views: 6350
Re: Dim up / down LED by a rule ?
dimmer.jpg I use the following lua script in domoticz to dim led lights commandArray = {} -- Check for wifidimmer changed DomDevice = 'wifidimmer' for i, v in pairs(devicechanged) do if (i == DomDevice) then if (v == 'Off') then DomValue = 0 commandArray['OpenURL']='http://192.168.0.44/control?cmd=...
- 09 Aug 2016, 22:08
- Forum: ESP Easy: Software
- Topic: How to use %sysname% in Publish command?
- Replies: 12
- Views: 9299
Re: How to use %sysname% in Publish command?
This is how I got publish to work to domoticz on Landing_PIR#Switch=1 do if [Outside_lux#lux]<4 Publish domoticz/in,{"idx":42,"command":"switchlight","switchcmd":"On"} timerSet,2,10 endon On Rules#Timer=2 do Publish domoticz/in,{"idx":42,&q...
- 06 Aug 2016, 18:59
- Forum: ESP Easy: Software
- Topic: Firmware reload
- Replies: 2
- Views: 3545
Re: Firmware reload
have you checked if its gone into AP mode?
See if you can see the ESP_01 wifi station
connect using key 'configesp' then go to 192.168.4.1
See if you can see the ESP_01 wifi station
connect using key 'configesp' then go to 192.168.4.1
- 06 Aug 2016, 16:34
- Forum: ESP Easy: Software
- Topic: MQTT : Failed to connected to broker
- Replies: 41
- Views: 59554
Re: MQTT : Failed to connected to broker
FYI, for anyone with the same issue I had.. I treated myself to a cubietruck 5 last weekend, running Lubuntu; I managed to get everything working with the exception of MQTT (mqtt installed fine and the service was running and I could publish to the broker using another remote Domoticz server also no...
- 30 Jul 2016, 23:54
- Forum: ESP Easy: Software
- Topic: ESP12, rules question
- Replies: 15
- Views: 13126
Re: ESP12, rules question
I have an esp12 with switched input on GPIO14 I have the pull up enabled also inversed is disabled I have a switch connected to earth which is normally closed, when the switch goes open the pull up gives me a '1' no resister needed. This setup has been working flawlessly for many months. Also i did ...
- 30 Jul 2016, 22:00
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295891
Re: ESP Easy Releases
******** Solved by deleting everything in C:\Users\xxx\AppData\Local\Arduino15 after installing 1.6.9 ******** I'm sure I'm doing something dumb, but anyone know what the issue it is? I downloaded 1.6.9, also updated the 2.3.0 also Pubsubclient updated to 2.6.0 but when ever I try to 'export compile...
- 06 Jul 2016, 22:45
- Forum: ESP Easy: Projects / Applications
- Topic: Cases, casings, mounts, housings and 3D printing designs
- Replies: 10
- Views: 13344
Re: Cases, casings, mounts, housings and 3D printing designs
Rather than purchasing a 3d printer. I decided on a cnc mill - 3020T 3 axis version. With this I should be able to make enclosures from milled perspex or acylic Also should be able to mill pcb's ? Any one tried this? Does anyone know which is best software for cnc milling - mach3 or linuxcnc? Apprec...
- 06 Jul 2016, 22:31
- Forum: ESP Easy: Hardware
- Topic: 4Mbyte Memory Upgrade
- Replies: 6
- Views: 6845
Re: 4Mbyte Memory Upgrade
I managed to upgrade 5 x esp207's from 512K to 4mbyte, I then reflashed them with the latest firmware r108
And they have been working normally since.
And they have been working normally since.
- 26 Jun 2016, 00:51
- Forum: ESP Easy: Projects / Applications
- Topic: Cases, casings, mounts, housings and 3D printing designs
- Replies: 10
- Views: 13344
Re: Cases, casings, mounts, housings and 3D printing designs
I'm also interested in creating some enclosures for my projects, i haven't yet bought the printer yet, can anyone recommend one?
I was considering the 'DIY' type where you assemble them, they seem a lot cheaper?
I was considering the 'DIY' type where you assemble them, they seem a lot cheaper?
- 26 Jun 2016, 00:43
- Forum: ESP Easy: Hardware
- Topic: 4Mbyte Memory Upgrade
- Replies: 6
- Views: 6845
Re: 4Mbyte Memory Upgrade
thanks WilliButz for the confirmation
- 25 Jun 2016, 18:19
- Forum: ESP Easy: Hardware
- Topic: 4Mbyte Memory Upgrade
- Replies: 6
- Views: 6845
Re: 4Mbyte Memory Upgrade
I just ordered 10 x 4M memory http://www.aliexpress.com/item/WINBOND-W25Q32BVSSIG-W25Q32BVSIG-W25Q32BV-SOP8-3V-32M-BIT-SERIAL-FLASH-MEMORY/32356279928.html £3.36 for 10 (seems cheap enough?) I intend to upgrade some of my esp01 so that i can OTA Flash firmware, this will save me building new boards ...
- 25 Jun 2016, 13:04
- Forum: ESP Easy: Hardware
- Topic: 4Mbyte Memory Upgrade
- Replies: 6
- Views: 6845
4Mbyte Memory Upgrade
Please see this link, showing how upgrade the memory on your ESP01
https://www.youtube.com/watch?v=xyc1gCjguRU
Has anyone tried this?
https://www.youtube.com/watch?v=xyc1gCjguRU
Has anyone tried this?
- 19 Jun 2016, 22:58
- Forum: ESP Easy: Software
- Topic: Sendtohttp - domoticz json
- Replies: 13
- Views: 23478
Re: Sendtohttp - domoticz json
instead of using sendtohttp I found 'publish' works brilliantly :D on Landing_PIR#Switch=1 do if [lux#lux]<2 Publish domoticz/in,{"idx":42,"command":"switchlight","switchcmd":"On"} timerSet,2,20 endon On Rules#Timer=2 do Publish domoticz/in,{"id...
- 18 Jun 2016, 08:47
- Forum: ESP Easy: Software
- Topic: Sendtohttp - domoticz json
- Replies: 13
- Views: 23478
Sendtohttp - domoticz json
I'm trying to use a PIR connected to my esp to make a switch connected to domoticz (esp12e with 108 running) Using the sendtohttp I added the following rule on Landing_PIR#Switch=1 do sendtohttp,192.168.0.93,8080,/json.htm? type=command¶m=switchlight&idx=42&switchcmd=On endon However...
- 01 Jun 2016, 19:14
- Forum: ESP Easy: Software
- Topic: which GPIO?
- Replies: 17
- Views: 14132
Re: which GPIO?
I am using a HC-SR501 PIR without any issues
The PIR is powered by 5v
the output is 3.3v connected GPIO 12 on ESP12e
I have the pull up enabled
inversed is disabled
I also tried the smaller HC-SR505 Mini PIR's but found these unreliable
The PIR is powered by 5v
the output is 3.3v connected GPIO 12 on ESP12e
I have the pull up enabled
inversed is disabled
I also tried the smaller HC-SR505 Mini PIR's but found these unreliable
- 15 Apr 2016, 01:19
- Forum: ESP Easy: Software
- Topic: Rules examples
- Replies: 41
- Views: 70847
Re: Rules examples
I was wondering if its possible to use an 'OR' function here is my attempt at a thermostat control based on occupancy (the Or doesn't seem to work?) on temp1#Temperature>40 or occupied#Output=0 do mcpgpio,23,0 gpio,0,0 endon on temp1#Temperature<38 do if [occupied#Output]=1 mcpgpio,23,1 gpio,0,1 end...
- 08 Apr 2016, 10:43
- Forum: ESP Easy: Software
- Topic: publish to my personnal site
- Replies: 1
- Views: 2565
Re: publish to my personnal site
I've been experimenting with sending data as mqtt to a broker and by having node red I can convert the payload to whatever. Node Red as hundreds of different api's. You can also share the same data to several different devices, I'm sending temperature and status updates to Freeboard.io and also the ...
- 08 Apr 2016, 00:51
- Forum: ESP Easy: Software
- Topic: OTA Firmware Upgrade
- Replies: 1
- Views: 2989
OTA Firmware Upgrade
I've been trying to work out why OTA upgrades seem to crash when I have Domoticz MQTT enabled in the configuration, but when I switch to Domoticz HTTP. OTA upgrades work fine? Any idea's This is the same for 5 different ESP12E's ?
- 12 Feb 2016, 22:11
- Forum: ESP Easy: Software
- Topic: [Solved] Multiple i2c devices ...
- Replies: 12
- Views: 13390
Re: Multiple i2c devices ...
Fantastic job..
2x MCP23017's working
Using ports 17 to 32 work as either inputs or outputs as does ports 1 to 16 (I'm using R78)
Many thanks
2x MCP23017's working
Using ports 17 to 32 work as either inputs or outputs as does ports 1 to 16 (I'm using R78)
Many thanks
- 10 Feb 2016, 21:34
- Forum: ESP Easy: Projects / Applications
- Topic: Stepper motor controll
- Replies: 4
- Views: 6803
Re: Stepper motor controll
fourth it.. I have a motor already on my desk. Planning on making automated curtain control when I find time.
- 10 Feb 2016, 21:10
- Forum: ESP Easy: Software
- Topic: [Solved] Multiple i2c devices ...
- Replies: 12
- Views: 13390
Re: Multiple i2c devices ...
Well... I am currently using 8 Inputs and 8 Outputs on one ESP1E which I am replacing with the one below using a 12E (Originally I had this connected to a RPI. using MCP23s17's . These now swapped out with a MCP23017 and rewired as I2C) Soon as I get this one back working I will try. many thanks 201...
- 07 Feb 2016, 18:03
- Forum: ESP Easy: Software
- Topic: [Solved] Multiple i2c devices ...
- Replies: 12
- Views: 13390
Re: Multiple i2c devices ...
having a selectable I2C address would be useful for MCP23017 + PCF8574
I have a board which I was using with my Pi which has 2 x MCP23017 address 0x20 / 0x21
I have a board which I was using with my Pi which has 2 x MCP23017 address 0x20 / 0x21
- 28 Dec 2015, 16:31
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295891
Re: ESP Easy Releases
excellent.. thanks ..
- 28 Dec 2015, 15:32
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295891
Re: ESP Easy Releases
Sorry.. But I think I found a bug on build 57. When I choose level control, where the 'check task' is a SI7021 (Temp + Humidity) also where 'Check Value' = Humidity it actually uses the Temperature levels not humidity as the control. but when I select 'Check Value' = Temperature this works fine. It ...
- 25 Dec 2015, 22:12
- Forum: ESP Easy: Software
- Topic: Discussion on local control by ESP Easy
- Replies: 29
- Views: 25073
Re: Discussion on local control by ESP Easy
Really great having the local control. However, I was wondering if it is possible to change the setpoint value from domoticz? Many thanks in advance.
- 15 Dec 2015, 23:55
- Forum: ESP Easy: Hardware
- Topic: OLED I2C
- Replies: 43
- Views: 35843
Re: OLED I2C
thanks for the reply.. appreciated.. I can live with the yellow font on lines ..7 & 8 .. I think it looks cool..