Hi,
take a look at https://github.com/letscontrolit/ESPEas ... 6_envs.ini and u will see thats in work.
Search found 86 matches
- 26 Feb 2024, 16:24
- Forum: ESP Easy: Hardware
- Topic: Sparkfun DEV 22924
- Replies: 6
- Views: 328
- 26 Feb 2024, 16:02
- Forum: ESP Easy: Hardware
- Topic: Sparkfun DEV 22924
- Replies: 6
- Views: 328
Sparkfun DEV 22924
Hi, today arrived (2 pcs via Antratek NL): SparkFun DEV-22924 ESP32-C6 16MB Flash https://www.sparkfun.com/products/22924 https://www.sparkfun.com/news/9811 https://www.antratek.nl/thing-plus-esp32-c6 and no .bin File to prog it via ESPEASY @TD-er: could it help if i send you one of these? To find i...
- 22 Sep 2017, 20:36
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 244456
- 25 Aug 2017, 18:35
- Forum: ESP Easy: Hardware
- Topic: Did I fry my Sonoff
- Replies: 12
- Views: 10232
Re: Did I fry my Sonoff
Hi,
I´m using the Arduino IDE and thats the way to program the flash.
- 25 Aug 2017, 14:07
- Forum: ESP Easy: Hardware
- Topic: v2.0.0-dev11: two INA219 Devices get the same address
- Replies: 8
- Views: 7834
- 25 Aug 2017, 14:02
- Forum: ESP Easy: Hardware
- Topic: Did I fry my Sonoff
- Replies: 12
- Views: 10232
Re: Did I fry my Sonoff
Hi,
they changed the used Flash, see
viewtopic.php?f=5&t=3386&p=18046&hilit=DOUT#p18046
use DOUT and everything go fine.
best wishes
BerndJ
they changed the used Flash, see
viewtopic.php?f=5&t=3386&p=18046&hilit=DOUT#p18046
use DOUT and everything go fine.
best wishes
BerndJ
- 01 Aug 2017, 00:57
- Forum: ESP Easy: General Discussion
- Topic: Pushbutton toggle
- Replies: 5
- Views: 8506
it´s so easy
Hi, in another Thread i find the solution, here are a rule for a modified (LED in red working on GPIO12) sonoff Basic: On Button#Switch=toggle do if [Steckdose#Switch]=0 gpio,12,1 else gpio,12,0 endif EndOn Thing we should include it (the choice =toggle) to the wiki U had to create a device switch i...
- 31 Jul 2017, 15:19
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 244456
- 28 Jul 2017, 12:27
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy WIKI down
- Replies: 0
- Views: 1740
ESPEasy WIKI down
Hi,
i did´nt had access to:
https://www.letscontrolit.com/wiki/index.php/PCA9685
and other topics.
Hope u could repair it.
best wishes
BerndJ
i did´nt had access to:
https://www.letscontrolit.com/wiki/index.php/PCA9685
and other topics.
Hope u could repair it.
best wishes
BerndJ
- 28 Jul 2017, 12:06
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 244456
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
Hi,
make a calibraton with the toaster, he had a power factor of 100%, and this is ideal for calibration.
Take a look to yr light, power factor ??
when u use this part for calibration there is no way for 100% results.
best wishes
BerndJ
make a calibraton with the toaster, he had a power factor of 100%, and this is ideal for calibration.
Take a look to yr light, power factor ??
when u use this part for calibration there is no way for 100% results.
best wishes
BerndJ
- 27 Jul 2017, 14:07
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 244456
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
Hi,
is the 50W bulb a resistor load, or an electronic? with rectifier and capacitor.
What is the power factor?
is the 50W bulb a resistor load, or an electronic? with rectifier and capacitor.
What is the power factor?
- 27 Jul 2017, 12:28
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 244456
Little Bug: forgets the calibration
Hi, when the device lost the power and it came back then we found the "old" settings and the measure values are wrong. Go to Devices --> Click Edit (the HLW8012) --> Click Submit --> Click Close and he uses the calibration values. Could the developer correct? best wishes BerndJ
- 26 Jul 2017, 22:59
- Forum: ESP Easy: Hardware
- Topic: Anyone tried this yet?
- Replies: 3
- Views: 4041
No, it´s ESP32
"This is made by Espressif so may be available from china directly for less." Sorry, it´s made from Olimex, and u did not can get it direct from China. Take a look at his homepage, good products to fair prices, .... and make in europe. But there´s a problem, it´s using the ESP32, NOT ESP82...
- 26 Jul 2017, 14:11
- Forum: ESP Easy: Software
- Topic: Controler using DYNDNS
- Replies: 2
- Views: 3076
Controler using DYNDNS
Hi, I´m using Domotics HTP as Controler by setting the Hostname and if the IP changed by DYNDNS the packets gets lost after that. Is there a way to get an error message ? or better: a rule that the plugin take a look and refreshes the IP?? or the best way, the plugin repaired itself or choices: 1. I...
- 19 Jan 2017, 22:48
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 735004
ESP Easy Mega, global sync not running
Hi, today i set up the 3.rd Module and got problems regarding the globals: Tools --> Advanced --> Global sync is set also there the UDP Port to 12000, Devices --> Task10 --> Global sync is set, and the 18B20 get´s values, also the check boxes Enabled and send to Controler1. In the receiving Modules ...
- 19 Jan 2017, 15:47
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 735004
P036, which lib is running
Hi, after i had solved some problems with my used libs, that is what i haved found. P036: https://github.com/squix78/esp8266-oled-ssd1306 use V2.0.0 !!! i had updatet to V3.2.5 and got errors, also the V2.0.2 gave me tons of errors. The best way is to give the information in https://github.com/letsc...
- 18 Jan 2017, 18:52
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 735004
Re: ESP Easy Mega, Errormessage
... to protect your flash-ram.... Hi, thx for the information, something new to learn. .... which revision Arduino IDE and which libs you addes, Arduino IDE 1.6.11 Boards: esp8266 by EsP8266 Community Version 2.3.0 now i take a copy of my notes in german language, hope u get it: ***** beim ersten m...
- 18 Jan 2017, 18:21
- Forum: ESP Easy: Projects / Applications
- Topic: Wish - Dual Controller-interface
- Replies: 3
- Views: 4022
Re: Wish - Dual Controller-interface
.... 1) is somewhere a survey of the changes per release? ..... Yes, read the ESP Easy: https://github.com/letscontrolit/ESPEasy/blob/master/__ReleaseNotes.ino ESP Easy Mega: https://github.com/letscontrolit/ESPEasyMega/blob/master/__ReleaseNotes.ino but don´t forget that´s in the Mega Part the Rev...
- 17 Jan 2017, 12:23
- Forum: ESP Easy: Projects / Applications
- Topic: Wish - Dual Controller-interface
- Replies: 3
- Views: 4022
Re: Wish - Dual Controller-interface
..... second controller interface ...... Hi, yr wish are allways reality, ..... but not in the old ESP easy, take a look to the new one, called ESP Easy Mega, http://www.letscontrolit.com/wiki/index.php/ESPEasyMega Github: https://github.com/letscontrolit/ESPEasyMega Forumthread: http://www.letscon...
- 16 Jan 2017, 22:59
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 735004
Re: ESP Easy Mega
https://github.com/letscontrolit/ESPEasyMegaut1545 wrote:....... please share it ...
- 16 Jan 2017, 17:08
- Forum: Experimental
- Topic: ESP Easy Mega
- Replies: 249
- Views: 735004
Re: ESP Easy Mega, Errormessage
Hi, today i flashed my first, thx a lot, great work. After i had installed the two libs i can compile and send the file to one living esp, who manage my second pellet stove. I learned, the setting files are not compatible, or? i´m too stupid. After the module is integrated in the own WLAN there are ...
- 23 Jun 2016, 00:13
- Forum: ESP Easy: Software
- Topic: UDP2ser
- Replies: 0
- Views: 2108
UDP2ser
Hi, I´m missing a function to receive any UDP Messages in ESPeasy, since Rev.104 I´m be able to send some messages in the rules, but what is with the receiving way??, any ideas??, or solutions?? Background: want to send information via UDP to these nice interactive Nextion LCD´s: https://www.itead.c...
- 03 May 2016, 20:27
- Forum: ESP Easy: General Discussion
- Topic: multiple DS18B20 reading 85°C
- Replies: 2
- Views: 6125
Re: multiple DS18B20 reading 85°C
Hi, this is the first reset value which is sending from these part. check yr power supply (best linear driven, not switched), the bus (cable lengtht, R at the end of the line) or better, use NOT the parasitar modus and spend the power line 100nF at each 18B20. If this not help, reduce the polling in...
- 19 Apr 2016, 22:09
- Forum: ESP Easy: Software
- Topic: Bug Report V101, autoconfig
- Replies: 4
- Views: 5593
Re: Bug Report V101, autoconfig
.... before clicking "Proceed to main config" ? Hi Martinus, i´d never see this point. In the first step i give him the WLAN Parameters and click connect. 2nd my iPhone looses the ESP_0 AP and connect into my WLAN, automaticcally, no chance to change this. the following redirect is wrong,...
- 17 Apr 2016, 16:01
- Forum: ESP Easy: Software
- Topic: Bug Report V101, autoconfig
- Replies: 4
- Views: 5593
Bug Report V101, autoconfig
Hi, i take V101 on an resetted ESP-01 and tested the autoconfig: see ESP_0 on my iPhone login to these AP set the WLAN Parameters, see in the serial line, he´s logging in get an IP via DHCP (another IP Range, outside the old one) INIT : Boot OK INIT : Normal boot >settings System Info IP Address : 0...
- 14 Apr 2016, 16:50
- Forum: ESP Easy: Software
- Topic: autoconfig, Bug, missing save command
- Replies: 0
- Views: 2033
autoconfig, Bug, missing save command
Hi, i taked some new esp-12f and flashed them with V100. Connected via iPhone to his AP-Mode, set the parameters and they get in touch with my WLAN. BUT: if i repowered they forget these parameters. The manual way via serial connection: wifissid xxxxxx wifikey xxxxxx save Think u had forget the save...
- 01 Apr 2016, 13:53
- Forum: ESP Easy: Hardware
- Topic: ESP-07 1MB, which Flash size for OTA?
- Replies: 1
- Views: 3777
ESP-07 1MB, which Flash size for OTA?
Hi,
i got some of these new 1MB Modules and did´nt get it running with OTA.
What is the preferred Setup for compiling so that i can use OTA?
best wishes
BerndJ
i got some of these new 1MB Modules and did´nt get it running with OTA.
What is the preferred Setup for compiling so that i can use OTA?
best wishes
BerndJ
- 01 Apr 2016, 13:49
- Forum: ESP Easy: Software
- Topic: Bug Analog Input R095
- Replies: 0
- Views: 1869
Bug Analog Input R095
Hi, i just flashed a new esp-12E and got problems setting up an analog input: Name: Input is ok and u can see it, but next time it´s gone. formula field, no chance to set it up. I had some running in V093, flashed the new esp back to V093, same shit as above. Could it bee that we had this problem si...
- 21 Mar 2016, 13:29
- Forum: ESP Easy: General Discussion
- Topic: Problems with (BME280) - actually reconnecting WIFI!
- Replies: 6
- Views: 8500
Re: Problems with BME280
Hi Chris,HarpieC wrote:That didn't help
did u use PullUp Rs on I2C ??
See:
http://www.esp8266.nu/index.php/Baromet ... iderations
could be helpful
Bernd
- 28 Feb 2016, 18:46
- Forum: ESP Easy: Software
- Topic: Introducing the ESPEasy-Plugin-Playground
- Replies: 12
- Views: 22850
Re: Introducing the ESPEasy-Plugin-Playground
..... how to activate plugins... Hi, download the .zip file in the playground unzip it take yr choice and copy the pxxx file u want to include. paste it to espeasy.ino in your arduino IDE compile it and enjoy BerndJ BTW: it would be nice to get the following sites available: http://www.esp8266.nu/i...
- 17 Feb 2016, 18:29
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Re: ESP Easy Releases
Hi @ all i had the problem that i´m missing some details in the json call, why? want to create a module for ip-symcon to generate all variables etc. there. Shortly take a look at yr code and attached a new handle in webserver.ino at the top u must add the following: WebServer.on("/jsonxl",...
- 03 Feb 2016, 01:25
- Forum: Introduce yourself
- Topic: BerndJ from germany
- Replies: 3
- Views: 3828
Re: BerndJ from germany
Hi,
.....any advances on the ArtNet front?.....
No, had some problems ser2net at moment
.....any advances on the ArtNet front?.....
No, had some problems ser2net at moment
- 24 Jan 2016, 15:51
- Forum: ESP Easy: Hardware
- Topic: build 70: HC-SR04 random values
- Replies: 4
- Views: 5612
Re: build 70: HC-SR04 random values
Hi,
yes, it´s runs. Youre resistors are low enought. The internal Pullup had round about 40KOhm.
But my schematics had the better energy bilance.
yes, it´s runs. Youre resistors are low enought. The internal Pullup had round about 40KOhm.
But my schematics had the better energy bilance.
- 24 Jan 2016, 12:10
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
- 24 Jan 2016, 00:04
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Test R072
Hi,
had two fresh and brand new Modules:
one ESP-12E and
one ESP-12F.
Both flashed via serial line, both needed a hardware reset, but:
TaTa !!,
running fine with R072, looks like these problems are solved!
had two fresh and brand new Modules:
one ESP-12E and
one ESP-12F.
Both flashed via serial line, both needed a hardware reset, but:
TaTa !!,
running fine with R072, looks like these problems are solved!
- 23 Jan 2016, 20:41
- Forum: ESP Easy: General Discussion
- Topic: More Esp-12 Flashing problems
- Replies: 102
- Views: 90305
Re: More Esp-12 Flashing problems
Hi,
yr results is not the same, see the first entries 1020 to 1023.
Is the problem solved in R072 ??, would be fine.
yr results is not the same, see the first entries 1020 to 1023.
Is the problem solved in R072 ??, would be fine.
- 23 Jan 2016, 20:30
- Forum: ESP Easy: Hardware
- Topic: build 70: HC-SR04 random values
- Replies: 4
- Views: 5612
Re: build 70: HC-SR04 random values
Hi, had the same problem using these part. It´s right, the trigger could be connect direct. I used also resistor network (4K7 and 10K) and that´s bullshit because we init a war between the Pull´s: an Down in your RNetwork an Up activted via Software (see the script to the HC04) first dead: the digit...
- 23 Jan 2016, 20:07
- Forum: ESP Easy: General Discussion
- Topic: More Esp-12 Flashing problems
- Replies: 102
- Views: 90305
Re: More Esp-12 Flashing problems
try it with 4M and begin with R029 and then R068
three minutes and all would be fine
three minutes and all would be fine
- 23 Jan 2016, 20:04
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Re: ESP Easy Releases
Hi Bert,
it seems Martinus has solved these problem.
just R070 via OTA direct to R072 flashed on 3 boards without problems, great work!
Thx a lot.
it seems Martinus has solved these problem.
just R070 via OTA direct to R072 flashed on 3 boards without problems, great work!
Thx a lot.
- 23 Jan 2016, 19:54
- Forum: ESP Easy: General Discussion
- Topic: More Esp-12 Flashing problems
- Replies: 102
- Views: 90305
Re: More Esp-12 Flashing problems
Hi Martinus, R72 just checked on my 3 "problem children" direct via OTA from R070, runs fine, no hardware reset needed. @ tozett: if u will using OTA u had to prog these parts only with 4M(3M SPIFFS), beginning with R029 and then R068, see my parallel post where i had listed the used line ...
- 23 Jan 2016, 17:28
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Re: ESP Easy Releases
Hi Bert,
this happens only if u prog directly from V068 to V070 via OTA.
u can avoid it by prog 068 to 069 to 070, this is running fine.
this happens only if u prog directly from V068 to V070 via OTA.
u can avoid it by prog 068 to 069 to 070, this is running fine.
- 22 Jan 2016, 18:46
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Re: ESP Easy Releases
Hi, Bert´s tips are checked and here is the result: ESP-12E on own PCB´s 4M(3MB SPIFFS) R020 OK R039 Fail R029 OK R034 OK R036 OK R038 OK R039 OK ?? R048 OK R068 OK OTA to R069, OTA to 070: OK next one: R020 OK R038 Fail R034 Fail R029 OK R048 OK R068 OK OTA to 070, need a hardware reset or loss of ...
- 22 Jan 2016, 16:53
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Re: ESP Easy Releases
Hi Bert, could it be that we´re writing the settings to false adresses in mode 4M(3M SPIFFS). It seems so, because when something went wrong i can see on the serial line that only the first two writings are succesfull, all others had failures. Meanwhile I create the binfile under generic and 4M(3MB ...
- 22 Jan 2016, 00:12
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Re: ESP Easy Releases
Hi,
supplement: until V068 i had all my ESP-12E flashed via "Generic ESP 8266 Module" and Flash Size "512KB (64KB SPIFFS)",
that´s the only and one way it´s running and compiling.
Now with OTA these generatet .bin files are not accepted.
Hope it helps.
Bernd
supplement: until V068 i had all my ESP-12E flashed via "Generic ESP 8266 Module" and Flash Size "512KB (64KB SPIFFS)",
that´s the only and one way it´s running and compiling.
Now with OTA these generatet .bin files are not accepted.
Hope it helps.
Bernd
- 21 Jan 2016, 21:35
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
Re: ESP Easy Releases
Hi Bert, "Did you succeed to load R068 on the board?" No, i´ve got problems. One NodeMCUV2.0 and round about 9 pcs with own PCB with module 12E. On 5 boards V068 is running but OTA is not possible, failure. Also direct via serial line programming to V069 are making problems, mostly i got t...
- 21 Jan 2016, 17:39
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 295909
OTA R068 to 069
Hi Bert, could u be so kind and explain the steps who would be made. I had more ESP-12E and not one will accept OTA. What had to set in arduino IDE NodeMCU 1.0 regarding Flash size? 4M-3M or 4M-1M, both ended in a failure messsage. And had I flash some files first using the NodeMCU Firmware Programm...
- 21 Jan 2016, 01:09
- Forum: ESP Easy: Hardware
- Topic: ESP-07, 1MB, where to buy?
- Replies: 0
- Views: 1937
ESP-07, 1MB, where to buy?
Hi,
thx for OTA.
Now I´m looking for -07s Modules with a minimum of 1 MB for using it with external Antenna.
Anybody see something?
Or better, a -12E with the chance to connect it.
best wishes
BerndJ
thx for OTA.
Now I´m looking for -07s Modules with a minimum of 1 MB for using it with external Antenna.
Anybody see something?
Or better, a -12E with the chance to connect it.
best wishes
BerndJ
- 14 Jan 2016, 11:20
- Forum: ESP Easy: Hardware
- Topic: HC-SR501 PIR - stop false positives?
- Replies: 47
- Views: 100698
Re: HC-SR501 PIR - stop false positives?
Hi Richard, if u could realize it to count the frequency then y´re be able to calculate the speed of the objekt. In this case round about max. 150 Hz. Problem is: u don´t know it is coming or going with this speed, because the offset of the frequency to the carrier is 0. Best solution: use two of it...
- 13 Jan 2016, 18:51
- Forum: ESP Easy: Hardware
- Topic: SR-04 problem - Distance: 0
- Replies: 6
- Views: 8124
Re: SR-04 problem - Distance: 0
Hi, now I get the next HC-SR04 Modules and think we had a buck in the software. Some ESP-12E Modules show a PullUp Resistor on the second Port (echo Pin). The HC-SR04 pin is low, I use Voltage Devider 4K7 - 10K to convert the level and get 0.62 Volt on the ESP Port. If i disconnect my voltage devide...
- 27 Dec 2015, 13:23
- Forum: ESP Easy: Software
- Topic: Disable the ESP config AP?
- Replies: 12
- Views: 12145
Re: Disable the ESP config AP?
Hi,
1) yes
2) the one who has sensors: yes, IP-symcon with open server socket
3) no, 0
1) yes
2) the one who has sensors: yes, IP-symcon with open server socket
3) no, 0