Search found 86 matches

by BerndJ
26 Feb 2024, 16:24
Forum: ESP Easy: Hardware
Topic: Sparkfun DEV 22924
Replies: 6
Views: 270

Re: Sparkfun DEV 22924

Hi,

take a look at https://github.com/letscontrolit/ESPEas ... 6_envs.ini and u will see thats in work.
by BerndJ
26 Feb 2024, 16:02
Forum: ESP Easy: Hardware
Topic: Sparkfun DEV 22924
Replies: 6
Views: 270

Sparkfun DEV 22924

Hi, today arrived (2 pcs via Antratek NL): SparkFun DEV-22924 ESP32-C6 16MB Flash https://www.sparkfun.com/products/22924 https://www.sparkfun.com/news/9811 https://www.antratek.nl/thing-plus-esp32-c6 and no .bin File to prog it via ESPEASY @TD-er: could it help if i send you one of these? To find i...
by BerndJ
22 Sep 2017, 20:36
Forum: ESP Easy: Hardware
Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
Replies: 146
Views: 215976

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

rol-rider wrote: 21 Sep 2017, 00:32....sonoff pow is 1M not 4M......
Hi,

meanwhile i had 15 pcs of the pows and all have 4M.

best wishes

BerndJ
by BerndJ
25 Aug 2017, 18:35
Forum: ESP Easy: Hardware
Topic: Did I fry my Sonoff
Replies: 12
Views: 10100

Re: Did I fry my Sonoff

aussieatlarge wrote: 25 Aug 2017, 15:10.. "use DOUT "...
Hi,

I´m using the Arduino IDE and thats the way to program the flash.

Ardoino_DOUT.png
Ardoino_DOUT.png (113.61 KiB) Viewed 9416 times
by BerndJ
25 Aug 2017, 14:07
Forum: ESP Easy: Hardware
Topic: v2.0.0-dev11: two INA219 Devices get the same address
Replies: 8
Views: 7720

Re: v2.0.0-dev11: two INA219 Devices get the same address

ThatRed wrote: 24 Aug 2017, 21:03..Can someone please confirm that there is a bug in the INA219 Plugin, if you use more than one device?...
Hi,

yes i can confirm it.

Weeks ago i tried to use 4 of these and there were no chance to get it running. Only one.

best wishes

BerndJ
by BerndJ
25 Aug 2017, 14:02
Forum: ESP Easy: Hardware
Topic: Did I fry my Sonoff
Replies: 12
Views: 10100

Re: Did I fry my Sonoff

Hi,

they changed the used Flash, see

viewtopic.php?f=5&t=3386&p=18046&hilit=DOUT#p18046

use DOUT and everything go fine.

best wishes

BerndJ
by BerndJ
01 Aug 2017, 00:57
Forum: ESP Easy: General Discussion
Topic: Pushbutton toggle
Replies: 5
Views: 8428

it´s so easy

Hi, in another Thread i find the solution, here are a rule for a modified (LED in red working on GPIO12) sonoff Basic: On Button#Switch=toggle do if [Steckdose#Switch]=0 gpio,12,1 else gpio,12,0 endif EndOn Thing we should include it (the choice =toggle) to the wiki U had to create a device switch i...
by BerndJ
28 Jul 2017, 12:27
Forum: ESP Easy: General Discussion
Topic: ESPEasy WIKI down
Replies: 0
Views: 1696

ESPEasy WIKI down

Hi,

i did´nt had access to:

https://www.letscontrolit.com/wiki/index.php/PCA9685

and other topics.

Hope u could repair it.

best wishes

BerndJ
by BerndJ
28 Jul 2017, 12:06
Forum: ESP Easy: Hardware
Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
Replies: 146
Views: 215976

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Hi,

make a calibraton with the toaster, he had a power factor of 100%, and this is ideal for calibration.

Take a look to yr light, power factor ??

when u use this part for calibration there is no way for 100% results.

best wishes

BerndJ
by BerndJ
27 Jul 2017, 14:07
Forum: ESP Easy: Hardware
Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
Replies: 146
Views: 215976

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Hi,

is the 50W bulb a resistor load, or an electronic? with rectifier and capacitor.

What is the power factor?
by BerndJ
27 Jul 2017, 12:28
Forum: ESP Easy: Hardware
Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
Replies: 146
Views: 215976

Little Bug: forgets the calibration

Hi, when the device lost the power and it came back then we found the "old" settings and the measure values are wrong. Go to Devices --> Click Edit (the HLW8012) --> Click Submit --> Click Close and he uses the calibration values. Could the developer correct? best wishes BerndJ
by BerndJ
26 Jul 2017, 22:59
Forum: ESP Easy: Hardware
Topic: Anyone tried this yet?
Replies: 3
Views: 3989

No, it´s ESP32

"This is made by Espressif so may be available from china directly for less." Sorry, it´s made from Olimex, and u did not can get it direct from China. Take a look at his homepage, good products to fair prices, .... and make in europe. But there´s a problem, it´s using the ESP32, NOT ESP82...
by BerndJ
26 Jul 2017, 14:11
Forum: ESP Easy: Software
Topic: Controler using DYNDNS
Replies: 2
Views: 3046

Controler using DYNDNS

Hi, I´m using Domotics HTP as Controler by setting the Hostname and if the IP changed by DYNDNS the packets gets lost after that. Is there a way to get an error message ? or better: a rule that the plugin take a look and refreshes the IP?? or the best way, the plugin repaired itself or choices: 1. I...
by BerndJ
19 Jan 2017, 22:48
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 633703

ESP Easy Mega, global sync not running

Hi, today i set up the 3.rd Module and got problems regarding the globals: Tools --> Advanced --> Global sync is set also there the UDP Port to 12000, Devices --> Task10 --> Global sync is set, and the 18B20 get´s values, also the check boxes Enabled and send to Controler1. In the receiving Modules ...
by BerndJ
19 Jan 2017, 15:47
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 633703

P036, which lib is running

Hi, after i had solved some problems with my used libs, that is what i haved found. P036: https://github.com/squix78/esp8266-oled-ssd1306 use V2.0.0 !!! i had updatet to V3.2.5 and got errors, also the V2.0.2 gave me tons of errors. The best way is to give the information in https://github.com/letsc...
by BerndJ
18 Jan 2017, 18:52
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 633703

Re: ESP Easy Mega, Errormessage

... to protect your flash-ram.... Hi, thx for the information, something new to learn. .... which revision Arduino IDE and which libs you addes, Arduino IDE 1.6.11 Boards: esp8266 by EsP8266 Community Version 2.3.0 now i take a copy of my notes in german language, hope u get it: ***** beim ersten m...
by BerndJ
18 Jan 2017, 18:21
Forum: ESP Easy: Projects / Applications
Topic: Wish - Dual Controller-interface
Replies: 3
Views: 3971

Re: Wish - Dual Controller-interface

.... 1) is somewhere a survey of the changes per release? ..... Yes, read the ESP Easy: https://github.com/letscontrolit/ESPEasy/blob/master/__ReleaseNotes.ino ESP Easy Mega: https://github.com/letscontrolit/ESPEasyMega/blob/master/__ReleaseNotes.ino but don´t forget that´s in the Mega Part the Rev...
by BerndJ
17 Jan 2017, 12:23
Forum: ESP Easy: Projects / Applications
Topic: Wish - Dual Controller-interface
Replies: 3
Views: 3971

Re: Wish - Dual Controller-interface

..... second controller interface ...... Hi, yr wish are allways reality, ..... but not in the old ESP easy, take a look to the new one, called ESP Easy Mega, http://www.letscontrolit.com/wiki/index.php/ESPEasyMega Github: https://github.com/letscontrolit/ESPEasyMega Forumthread: http://www.letscon...
by BerndJ
16 Jan 2017, 22:59
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 633703

Re: ESP Easy Mega

ut1545 wrote:....... please share it ...
https://github.com/letscontrolit/ESPEasyMega
by BerndJ
16 Jan 2017, 17:08
Forum: Experimental
Topic: ESP Easy Mega
Replies: 249
Views: 633703

Re: ESP Easy Mega, Errormessage

Hi, today i flashed my first, thx a lot, great work. After i had installed the two libs i can compile and send the file to one living esp, who manage my second pellet stove. I learned, the setting files are not compatible, or? i´m too stupid. After the module is integrated in the own WLAN there are ...
by BerndJ
23 Jun 2016, 00:13
Forum: ESP Easy: Software
Topic: UDP2ser
Replies: 0
Views: 2066

UDP2ser

Hi, I´m missing a function to receive any UDP Messages in ESPeasy, since Rev.104 I´m be able to send some messages in the rules, but what is with the receiving way??, any ideas??, or solutions?? Background: want to send information via UDP to these nice interactive Nextion LCD´s: https://www.itead.c...
by BerndJ
03 May 2016, 20:27
Forum: ESP Easy: General Discussion
Topic: multiple DS18B20 reading 85°C
Replies: 2
Views: 6077

Re: multiple DS18B20 reading 85°C

Hi, this is the first reset value which is sending from these part. check yr power supply (best linear driven, not switched), the bus (cable lengtht, R at the end of the line) or better, use NOT the parasitar modus and spend the power line 100nF at each 18B20. If this not help, reduce the polling in...
by BerndJ
19 Apr 2016, 22:09
Forum: ESP Easy: Software
Topic: Bug Report V101, autoconfig
Replies: 4
Views: 5523

Re: Bug Report V101, autoconfig

.... before clicking "Proceed to main config" ? Hi Martinus, i´d never see this point. In the first step i give him the WLAN Parameters and click connect. 2nd my iPhone looses the ESP_0 AP and connect into my WLAN, automaticcally, no chance to change this. the following redirect is wrong,...
by BerndJ
17 Apr 2016, 16:01
Forum: ESP Easy: Software
Topic: Bug Report V101, autoconfig
Replies: 4
Views: 5523

Bug Report V101, autoconfig

Hi, i take V101 on an resetted ESP-01 and tested the autoconfig: see ESP_0 on my iPhone login to these AP set the WLAN Parameters, see in the serial line, he´s logging in get an IP via DHCP (another IP Range, outside the old one) INIT : Boot OK INIT : Normal boot >settings System Info IP Address : 0...
by BerndJ
14 Apr 2016, 16:50
Forum: ESP Easy: Software
Topic: autoconfig, Bug, missing save command
Replies: 0
Views: 1996

autoconfig, Bug, missing save command

Hi, i taked some new esp-12f and flashed them with V100. Connected via iPhone to his AP-Mode, set the parameters and they get in touch with my WLAN. BUT: if i repowered they forget these parameters. The manual way via serial connection: wifissid xxxxxx wifikey xxxxxx save Think u had forget the save...
by BerndJ
01 Apr 2016, 13:53
Forum: ESP Easy: Hardware
Topic: ESP-07 1MB, which Flash size for OTA?
Replies: 1
Views: 3721

ESP-07 1MB, which Flash size for OTA?

Hi,

i got some of these new 1MB Modules and did´nt get it running with OTA.

What is the preferred Setup for compiling so that i can use OTA?

best wishes

BerndJ
by BerndJ
01 Apr 2016, 13:49
Forum: ESP Easy: Software
Topic: Bug Analog Input R095
Replies: 0
Views: 1852

Bug Analog Input R095

Hi, i just flashed a new esp-12E and got problems setting up an analog input: Name: Input is ok and u can see it, but next time it´s gone. formula field, no chance to set it up. I had some running in V093, flashed the new esp back to V093, same shit as above. Could it bee that we had this problem si...
by BerndJ
21 Mar 2016, 13:29
Forum: ESP Easy: General Discussion
Topic: Problems with (BME280) - actually reconnecting WIFI!
Replies: 6
Views: 8302

Re: Problems with BME280

HarpieC wrote:That didn't help
Hi Chris,

did u use PullUp Rs on I2C ??

See:

http://www.esp8266.nu/index.php/Baromet ... iderations

could be helpful

Bernd
by BerndJ
28 Feb 2016, 18:46
Forum: ESP Easy: Software
Topic: Introducing the ESPEasy-Plugin-Playground
Replies: 12
Views: 22691

Re: Introducing the ESPEasy-Plugin-Playground

..... how to activate plugins... Hi, download the .zip file in the playground unzip it take yr choice and copy the pxxx file u want to include. paste it to espeasy.ino in your arduino IDE compile it and enjoy BerndJ BTW: it would be nice to get the following sites available: http://www.esp8266.nu/i...
by BerndJ
17 Feb 2016, 18:29
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

Hi @ all i had the problem that i´m missing some details in the json call, why? want to create a module for ip-symcon to generate all variables etc. there. Shortly take a look at yr code and attached a new handle in webserver.ino at the top u must add the following: WebServer.on("/jsonxl",...
by BerndJ
03 Feb 2016, 01:25
Forum: Introduce yourself
Topic: BerndJ from germany
Replies: 3
Views: 3789

Re: BerndJ from germany

Hi,

.....any advances on the ArtNet front?.....

No, had some problems ser2net at moment
by BerndJ
24 Jan 2016, 15:51
Forum: ESP Easy: Hardware
Topic: build 70: HC-SR04 random values
Replies: 4
Views: 5485

Re: build 70: HC-SR04 random values

Hi,

yes, it´s runs. Youre resistors are low enought. The internal Pullup had round about 40KOhm.

But my schematics had the better energy bilance.
by BerndJ
24 Jan 2016, 12:10
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

https://github.com/ESP8266nu/ESPEasy

click on "download ZIP"
by BerndJ
24 Jan 2016, 00:04
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Test R072

Hi,

had two fresh and brand new Modules:

one ESP-12E and
one ESP-12F.

Both flashed via serial line, both needed a hardware reset, but:

TaTa !!, :D 8-)

running fine with R072, looks like these problems are solved!
by BerndJ
23 Jan 2016, 20:41
Forum: ESP Easy: General Discussion
Topic: More Esp-12 Flashing problems
Replies: 102
Views: 88661

Re: More Esp-12 Flashing problems

Hi,

yr results is not the same, see the first entries 1020 to 1023.

Is the problem solved in R072 ??, would be fine.
by BerndJ
23 Jan 2016, 20:30
Forum: ESP Easy: Hardware
Topic: build 70: HC-SR04 random values
Replies: 4
Views: 5485

Re: build 70: HC-SR04 random values

Hi, had the same problem using these part. It´s right, the trigger could be connect direct. I used also resistor network (4K7 and 10K) and that´s bullshit because we init a war between the Pull´s: an Down in your RNetwork an Up activted via Software (see the script to the HC04) first dead: the digit...
by BerndJ
23 Jan 2016, 20:07
Forum: ESP Easy: General Discussion
Topic: More Esp-12 Flashing problems
Replies: 102
Views: 88661

Re: More Esp-12 Flashing problems

try it with 4M and begin with R029 and then R068

three minutes and all would be fine
by BerndJ
23 Jan 2016, 20:04
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

Hi Bert,

it seems Martinus has solved these problem.

just R070 via OTA direct to R072 flashed on 3 boards without problems, great work!

Thx a lot.
by BerndJ
23 Jan 2016, 19:54
Forum: ESP Easy: General Discussion
Topic: More Esp-12 Flashing problems
Replies: 102
Views: 88661

Re: More Esp-12 Flashing problems

Hi Martinus, R72 just checked on my 3 "problem children" direct via OTA from R070, runs fine, no hardware reset needed. @ tozett: if u will using OTA u had to prog these parts only with 4M(3M SPIFFS), beginning with R029 and then R068, see my parallel post where i had listed the used line ...
by BerndJ
23 Jan 2016, 17:28
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

Hi Bert,

this happens only if u prog directly from V068 to V070 via OTA.

u can avoid it by prog 068 to 069 to 070, this is running fine.
by BerndJ
22 Jan 2016, 18:46
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

Hi, Bert´s tips are checked and here is the result: ESP-12E on own PCB´s 4M(3MB SPIFFS) R020 OK R039 Fail R029 OK R034 OK R036 OK R038 OK R039 OK ?? R048 OK R068 OK OTA to R069, OTA to 070: OK next one: R020 OK R038 Fail R034 Fail R029 OK R048 OK R068 OK OTA to 070, need a hardware reset or loss of ...
by BerndJ
22 Jan 2016, 16:53
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

Hi Bert, could it be that we´re writing the settings to false adresses in mode 4M(3M SPIFFS). It seems so, because when something went wrong i can see on the serial line that only the first two writings are succesfull, all others had failures. Meanwhile I create the binfile under generic and 4M(3MB ...
by BerndJ
22 Jan 2016, 00:12
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

Hi,

supplement: until V068 i had all my ESP-12E flashed via "Generic ESP 8266 Module" and Flash Size "512KB (64KB SPIFFS)",

that´s the only and one way it´s running and compiling.

Now with OTA these generatet .bin files are not accepted.

Hope it helps.

Bernd
by BerndJ
21 Jan 2016, 21:35
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

Re: ESP Easy Releases

Hi Bert, "Did you succeed to load R068 on the board?" No, i´ve got problems. One NodeMCUV2.0 and round about 9 pcs with own PCB with module 12E. On 5 boards V068 is running but OTA is not possible, failure. Also direct via serial line programming to V069 are making problems, mostly i got t...
by BerndJ
21 Jan 2016, 17:39
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 283524

OTA R068 to 069

Hi Bert, could u be so kind and explain the steps who would be made. I had more ESP-12E and not one will accept OTA. What had to set in arduino IDE NodeMCU 1.0 regarding Flash size? 4M-3M or 4M-1M, both ended in a failure messsage. And had I flash some files first using the NodeMCU Firmware Programm...
by BerndJ
21 Jan 2016, 01:09
Forum: ESP Easy: Hardware
Topic: ESP-07, 1MB, where to buy?
Replies: 0
Views: 1884

ESP-07, 1MB, where to buy?

Hi,

thx for OTA.
Now I´m looking for -07s Modules with a minimum of 1 MB for using it with external Antenna.
Anybody see something?
Or better, a -12E with the chance to connect it.

best wishes

BerndJ
by BerndJ
14 Jan 2016, 11:20
Forum: ESP Easy: Hardware
Topic: HC-SR501 PIR - stop false positives?
Replies: 47
Views: 99695

Re: HC-SR501 PIR - stop false positives?

Hi Richard, if u could realize it to count the frequency then y´re be able to calculate the speed of the objekt. In this case round about max. 150 Hz. Problem is: u don´t know it is coming or going with this speed, because the offset of the frequency to the carrier is 0. Best solution: use two of it...
by BerndJ
13 Jan 2016, 18:51
Forum: ESP Easy: Hardware
Topic: SR-04 problem - Distance: 0
Replies: 6
Views: 8065

Re: SR-04 problem - Distance: 0

Hi, now I get the next HC-SR04 Modules and think we had a buck in the software. Some ESP-12E Modules show a PullUp Resistor on the second Port (echo Pin). The HC-SR04 pin is low, I use Voltage Devider 4K7 - 10K to convert the level and get 0.62 Volt on the ESP Port. If i disconnect my voltage devide...
by BerndJ
27 Dec 2015, 13:23
Forum: ESP Easy: Software
Topic: Disable the ESP config AP?
Replies: 12
Views: 12047

Re: Disable the ESP config AP?

Hi,

1) yes
2) the one who has sensors: yes, IP-symcon with open server socket
3) no, 0