https://www.ebay.co.uk/itm/Digital-Wireless-WiFi-Smart-Programmable-Thermostat-Electric-Heating-App-Control/283526079627?ssPageName=STRK%3AMEBIDX%3AIT&var=584696677738&_trksid=p2057872.m2749.l2649 Without knowing the comms protocol between the ESP and the PIC I don't think it will be possib...

Ah!
It's unbranded, but works correctly with the blue SmartLife app.
Perhaps they are all Tuya standard, but try to get you to use their own app instead?
Mine wants you to use "Smart RM"

Hi, Flying Domotic,
Nothing to report yet regards controlling it, but it seems this is a Tuya-compliant device that can the controlled from one of the Tuya apps.
I'm now looking at using one of the Python libraries to control it.

Hi all, These generic wall thermostats seem to be widely available, such as Ebay. I've just got one to try out. There's an ESP-12 with just TX, RX, GPIO15, EN, VCC, GND connected. A PIC16F1947 microprocessor to drive the LCD screen. 5 touch-sensitive areas on the screen. Holes for a 5 pin header: RE...

Hi,
I've managed to flash one with ESPeasy, and setup the 3 switches.
If anyone is interested, I'll post the how-to details.

Thanks!
However did I miss that?

Hi,
Back in the days of R147 you could create an RSSI device using a device type of "System info".
This option doesn't seem to be there in Mega.
How is it done now?

Thanks Costo,
I also thought it most likely a hardware fault, even although I bought the unit directly from Itead.

Hi,
I can control the LED on GPIO13 successfully on my original Sonoff.
On my shiny new TH10 the same command 'GPIO,13,0' (in Tools->Command) shows successful execution, but the LED does not turn on.
Any ideas?

The problem seems to be that '&para' is replaced by '¶' when the rules are saved.
This has been noted many times before!

Yes, there is a dummy device that will hold up to 4 values. I use this in Domoticz to update the setpoint value - url = 'curl -m 5 "http://sonoff-1/control?cmd=event,Setpoint='..otherdevices['Cylinder setpoint']..'"' assert(io.popen(url)) and an ESPeasy rule to update the 1st value of task...

Yarysec, thanks!
Obvious now you show it.
And the tasks are all neatly numbered.

Hi Data,

Thanks for pointing me in the right direction!
In Hardware, I had set Wifi Status Led: to 13.
Setting it blank fixes it.

Hi Data, Thanks, but I'm sure that the LED is also controlled by the main ESP code, overriding my settings. I have had a look in the code. The function void statusLED(boolean traffic) in Misc.ino is called from several places. It certainly appears to make the blink I noticed when device data is sent...

Thanks!
I had a look in the code but could not find where the Rules keywords are processed.
My next task is to find out what a 'task' is.

Hi,
What are the parameters for the Rules command inputswitchstate,p1,p2 ?
The Wiki doesn't mention it, but I guess that p2 is the desired state.
Is there a definitive description of all Rules commands, and their parameters?

Hi Jeff, I think you have an extra character, perhaps by using copy&paste from Windows? SendToHTTP 192.168.1.12,8080,/json.htm?type=command ¶mm =switchlight&idx=46&switchcmd=On Perhaps edit the rule to delete a couple of chars back from the '=', and re-add the '&param'. EDIT!!! Sorry...

Rules as requested. SW0 = Push switch GPIO-0 Relay, State = GPIO-12 and its Value on TurnOn do if [Relay#State]=0 gpio,13,0 gpio,12,1 inputswitchstate 0,1 endif endon on TurnOff do if [Relay#State]=1 gpio,13,1 gpio,12,0 inputswitchstate 0,0 endif endon on Toggle do event,ToggleRelay endon on SW0#Swi...

Hi, I've gor my Sonoff flashed (147) and under 2-way control with Domoticz and some Rules. The relay switches, and the LED goes on and off as required. However, the LED, even when off, switches back on whenever the Sonoff sends any data back to Domoticz, e.g. RSSI. If the LED is already on, it blink...

There are too many 'm' in paramm!
The Wiki needs to be edited.

My RFlink has been happily receiving data from an Owl CM130 transmitter since May 13. Yesterday it suddenly completely stopped receiving, but the CM130 receiver still updates correctly. AFAIK nothing has changed, apart from new Domoticz betas, but Domoticz is receiving nothing. All other RFlink devi...

I have some working with RFlink.
However I used Domoticz to capture the optional remote control commands: it is Eurodomest protocol.

If I hover over the 'Introduce yourself' link, it shows a cute little popup 'Subscribe to RSS feed:'.
How do I actually subscribe?
Thanks.

I'm a retired IT consultant.
My RFlink is connected to a Raspberry Pi 2 running Domoticz.
It reads from several IR detectors, temperature sensors, and power meters, and controls power sockets using LUA scripts.
There is also a network of Z-wave devices.