Search found 10 matches
- 06 Sep 2018, 18:17
- Forum: ESP Easy: Hardware
- Topic: PCD8544 - Nokia 5110/3310 LCD - beta plugin
- Replies: 88
- Views: 126330
Re: PCD8544 - Nokia 5110/3310 LCD - beta plugin
You also have to define "USES_P208" Add it to the appropriate line with "build_flags" in the platformio.ini file. You add a define using the -D flag. So for example in the [common] section: build_flags = -D BUILD_GIT='"${sysenv.TRAVIS_TAG}"' -D NDEBUG -lstdc++ -lsupc++...
- 05 Sep 2018, 02:09
- Forum: ESP Easy: Hardware
- Topic: PCD8544 - Nokia 5110/3310 LCD - beta plugin
- Replies: 88
- Views: 126330
Re: PCD8544 - Nokia 5110/3310 LCD - beta plugin
ok now it compiles successfully however the plugin does not appear in the devices list to pick here is the code i used #ifdef USES_P208 //####################################################################################################### //################################## Plugin 208: NOKIA lcd...
- 05 Sep 2018, 00:56
- Forum: ESP Easy: Hardware
- Topic: PCD8544 - Nokia 5110/3310 LCD - beta plugin
- Replies: 88
- Views: 126330
Re: PCD8544 - Nokia 5110/3310 LCD - beta plugin
Hi, i am trying to compile using PlatformIO, and i get the below messages D:/ESPEasy-mega-20180904/src/_P208_PCD8544.ino: In function 'boolean Plugin_208(byte, EventStruct*, String&)': D:/ESPEasy-mega-20180904/src/_P208_PCD8544.ino:126:20: warning: unused variable 'setTextWrap' [-Wunused-variabl...
- 19 Jul 2017, 01:19
- Forum: ESP Easy: Projects / Applications
- Topic: ESPEasy to control air conditioners / heat pumps
- Replies: 163
- Views: 279638
Re: ESPEasy to control air conditioners / heat pumps
Hi Toni
is there any plans to include this work in the public ESPEasy dev release ? or we will have to compile every time ?
thanks a lot for your great work
is there any plans to include this work in the public ESPEasy dev release ? or we will have to compile every time ?
thanks a lot for your great work
- 01 Jul 2017, 01:23
- Forum: ESP Easy: General Discussion
- Topic: Controlling a continuous rotation servo
- Replies: 2
- Views: 3322
Re: Controlling a continuous rotation servo
Thank you for the info, actually i have had this link some time ago, and i tried the pulse method with no luck, it just turns the servo on for a fraction of a second and it stops
i use http://192.168.1.234/control?cmd=pulse,12,1,2
any other ideas ?
i use http://192.168.1.234/control?cmd=pulse,12,1,2
any other ideas ?
- 25 Jun 2017, 04:24
- Forum: ESP Easy: General Discussion
- Topic: Controlling a continuous rotation servo
- Replies: 2
- Views: 3322
Controlling a continuous rotation servo
Hi all, i want to control a continuous rotation servo, i am using the latest ESP Easy version and connecting my signal pin from the servo to GPIO12 in the ESP12E, as far as i understand in the continuous rotation servos there is nothing to limit the rotation based on position, i am using the command...
- 05 Dec 2016, 22:20
- Forum: ESP Easy: Hardware
- Topic: IR Transmitter ?
- Replies: 120
- Views: 200974
Re: IR Transmitter ?
Hi all,
is it possible by any means to send RAW large IR code like the ones used in ACs ? i managed to have this working on a normal Arduino, but it seems that Plugin P035 is configured only with the 7 well known protocols
it would be perfect if we have the ability to send RAW large commands
is it possible by any means to send RAW large IR code like the ones used in ACs ? i managed to have this working on a normal Arduino, but it seems that Plugin P035 is configured only with the 7 well known protocols
it would be perfect if we have the ability to send RAW large commands
- 12 Sep 2016, 00:12
- Forum: ESP Easy: Software
- Topic: Turning LED on and off based on LCD status
- Replies: 2
- Views: 3317
Re: Turning LED on and off based on LCD status
Well, now everything is working as i want, i connected the KY036 touch sensor to GPIO 4, and configured a new device as a Switch type "Push Button Active Low", and then i modified my rule to be : on s1#switch do gpio,5,1 lcdcmd,on timerSet,1,10 //Set Timer 1 for the next event in 4 seconds...
- 11 Sep 2016, 23:39
- Forum: ESP Easy: Software
- Topic: Turning LED on and off based on LCD status
- Replies: 2
- Views: 3317
Re: Turning LED on and off based on LCD status
Ok, i found a solution I found that if I create a device with a SWITCH input type for the GPIO connected to Display on/off button (in my case the button is connected to GPIO 4) I can use it in rules based on its state now my rule is like this: on s1#switch do gpio,5,1 timerSet,1,4 endon On Rules#Tim...
- 11 Sep 2016, 16:48
- Forum: ESP Easy: Software
- Topic: Turning LED on and off based on LCD status
- Replies: 2
- Views: 3317
Turning LED on and off based on LCD status
hi there,
i have a Display connected I2C and there is a button configured to turn on the Display for 5 seconds, i am wondering if there is a way that i can turn an LED connected to GPIO 5 when the Display is turned on and turn the LED of after the LCD turn off ?
thanks
i have a Display connected I2C and there is a button configured to turn on the Display for 5 seconds, i am wondering if there is a way that i can turn an LED connected to GPIO 5 when the Display is turned on and turn the LED of after the LCD turn off ?
thanks