Search found 51 matches

by adrianmihalko
01 Jan 2019, 18:07
Forum: RFlink: General Discussions
Topic: Rflink not working at all
Replies: 1
Views: 619

Rflink not working at all

Guys, what I am doing wrong? :( 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48; 10;version; 20;01;VER=1.1;REV=48;BUILD=04; 10;status; 20;02;STATUS;setRF433=ON;setNodoNRF=OFF;setMilight=OFF;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=OFF; 20;00;Nodo RadioFrequenc...
by adrianmihalko
13 Dec 2017, 09:10
Forum: ESP Easy: Hardware
Topic: Sonoff reflect state of button to Domoticz
Replies: 28
Views: 15821

Re: Sonoff reflect state of button to Domoticz

It is silent as hell. 8-)

Of course heavier load it's not working (a tried with a normal bulb and a hair dryer).

But it is still frustrating. :roll:
by adrianmihalko
13 Dec 2017, 08:34
Forum: ESP Easy: Hardware
Topic: Sonoff reflect state of button to Domoticz
Replies: 28
Views: 15821

Re: Sonoff reflect state of button to Domoticz

me: after turning off my Sonoff S20 (by button, or from app) there is still a 25V AC voltage left in the connector. Why? I connected it to my christmas LED lights, but they are lighting even after turning off, because 25V AC is enough for them to be lit. itead: It's impossible, after turning off, th...
by adrianmihalko
13 Dec 2017, 00:29
Forum: ESP Easy: General Discussion
Topic: Espeasy watchdog
Replies: 6
Views: 4241

Re: Espeasy watchdog

Wow, thanks for the tips guys. I will use both example scripts.
by adrianmihalko
13 Dec 2017, 00:25
Forum: ESP Easy: Hardware
Topic: Sonoff reflect state of button to Domoticz
Replies: 28
Views: 15821

Re: Sonoff reflect state of button to Domoticz

A very frustrating bug in my Sonoff switch: after turning off (by button, or from esp easy) there is still a 25V AC voltage left in the connector (measured with DMM). Why? I connected it to my christmas LED lights, but they are lighting even after turning off, because 25V AC is enough for them to be...
by adrianmihalko
16 Nov 2017, 00:36
Forum: ESP Easy: General Discussion
Topic: Espeasy watchdog
Replies: 6
Views: 4241

Espeasy watchdog

Hi, I am controlling a heater from EspEasy via a relay (xy/control?cmd=GPIO,14,0 and xy/control?cmd=GPIO,14,1). It is possible to write a "watchdog" script (rule) on the EspEasy itself? I mean if there is no connection to the Domoticz (or ping an ip address) turn off GPIO port (xy/control?cmd=GPIO,1...
by adrianmihalko
20 Sep 2017, 17:29
Forum: ESP Easy: Hardware
Topic: E-Paper Module
Replies: 1
Views: 992

E-Paper Module

Any chance for support for a cheap e-paper module like this?
s-l1600x.jpg
s-l1600x.jpg (80.49 KiB) Viewed 991 times

More info:
https://www.youtube.com/watch?v=_-Fk-Z8p18M
by adrianmihalko
27 Apr 2017, 17:24
Forum: ESP Easy: Projects / Applications
Topic: Rain Sensor
Replies: 26
Views: 12082

Re: Rain Sensor

Aliexpress delivers a very cheap package to be connected to switch-input of Arduino, Raspberry or ESP8266, or (also) to the analogue-input of those devices. No solution for corrosion on the electrodes, but a few DIY-pins can do the job, like described here Thank you guys, I bought similar rain modu...
by adrianmihalko
22 Apr 2017, 23:24
Forum: ESP Easy: Projects / Applications
Topic: Rain Sensor
Replies: 26
Views: 12082

Re: Rain Sensor

Guys, can you help me with a wiring diagram? I want to connect to an ESP-01, which has limited pins. It is possible?
by adrianmihalko
09 Apr 2017, 19:21
Forum: ESP Easy: General Discussion
Topic: Water Level Sensor switch
Replies: 5
Views: 1858

Re: Water Level Sensor switch

This answer is more than I would expect, thank you very much. I ordered the parts from eBay, can't wait to receive them and start build this project. :)
by adrianmihalko
09 Apr 2017, 12:30
Forum: ESP Easy: General Discussion
Topic: Water Level Sensor switch
Replies: 5
Views: 1858

Re: Water Level Sensor switch

Hi Shardan,

it's a simple DC 12V water pump.

Yeah, I think I am going this way: connect the switch between the + positive wire of the pump (case 1).

But it still would be great to sense the switch status (open-closed) with ESP (and send notification). What do you think, it is possible?
by adrianmihalko
09 Apr 2017, 00:42
Forum: ESP Easy: General Discussion
Topic: Water Level Sensor switch
Replies: 5
Views: 1858

Water Level Sensor switch

I want to connect to my ESP2866 a Water Level Sensor switch to turn off/disable water pump, when water tank is empty. I am thinking in: 1, physically connect the switch between the water pump's + positive wire - if there is no water the pump cannot start. But in this case I don't get any notificatio...
by adrianmihalko
13 Nov 2016, 15:05
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 42704

Re: Measure VCC

Great, now it's reading correctly. ;) Thanks again!
by adrianmihalko
12 Nov 2016, 23:25
Forum: ESP Easy: General Discussion
Topic: More Esp-12 Flashing problems
Replies: 102
Views: 42801

Re: More Esp-12 Flashing problems

I got "Incorrect PID or version!" + Flash erase is stopping at 127, If am uploading firmware to Wemos from Arduino IDE.

With ESP Easy's classic method flash.cmd+esptool it's working. The key I think is the "-cd nodemcu". Why does this switch matter so much?
by adrianmihalko
10 Nov 2016, 18:45
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 42704

Re: Measure VCC

Thanks, I found some more resistors, connected in series and final value is ca. 106K. How did you calculated the formula value/voltage? I am not an electric engineer, but I am interested. :) At least it works well and I got value 3.43V from my 18650 battery. Back to my question for a while. With my...
by adrianmihalko
06 Nov 2016, 23:11
Forum: ESP Easy: Projects / Applications
Topic: Tipping bucket rain gauge -> Pulse counter
Replies: 30
Views: 13113

Re: Tipping bucket rain gauge -> Pulse counter

It would be great to run from batteries. Anybody did thing like this? How long can it run from batteries?
by adrianmihalko
05 Nov 2016, 22:25
Forum: ESP Easy: Hardware
Topic: New ESP gadget
Replies: 323
Views: 148816

Re: New ESP gadget

Is there any chance to get Power Consumption Measurement with ESP Easy?

https://www.itead.cc/smart-home/sonoff-pow.html
by adrianmihalko
02 Nov 2016, 16:34
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

It is OK that my ESP modules (Wemos, NodeMCU) won't see my Wifi-N network? Only Wifi-G is available.
by adrianmihalko
17 Oct 2016, 21:42
Forum: ESP Easy: Software
Topic: ESP Easy next stable... (release candidates)
Replies: 155
Views: 47805

Re: ESP Easy next stable... (release candidates)

Wiki recommendation: you should add a more visible URL to this forum on front page of the Wiki (esp8266.nu), at this moment it's well hidden on the center of the page. :)
by adrianmihalko
15 Oct 2016, 19:37
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Hmm, I connected to 3V output and now it's working fine. Interesting, because the relay is an 5V module. :roll:

Another interesting thing, that the relay switch on when GPIO is pulled down curl 192.168.1.4/control?cmd=GPIO,14,0 -> it has reverse logic?
by adrianmihalko
15 Oct 2016, 19:23
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Hi, I connected a relay module to my Wemos D1 (firmware Esp Easy): VCC to 5V, GND to GND, In1 to GPIO14 (D5) The problem: the relay is always on (the red led is lighting). I tried to switch off: $ curl 192.168.1.4/control?cmd=GPIO,14,0 { "log": "GPIO 14 Set to 0", "plugin": 1, "pin": 14, "mode": "ou...
by adrianmihalko
11 Oct 2016, 21:17
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Ahhh, double checked everything and I had in Domoticz an ON/OFF command: http://192.168.1.4/control?cmd=GPIO,2,1.......which turned on the LED. ;)

Thanks for the help.
by adrianmihalko
10 Oct 2016, 08:35
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

So I "calibrated" sensors using formula and they seem to be accurate now.

I still not understand when/why the blue LED is lighting on my Wemos D1 mini. My first tought was that this is connected to D4 min, but even If I moved from that pin to other it is still lighting.
by adrianmihalko
04 Oct 2016, 23:53
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 42704

Re: Measure VCC

Thanks, I found some more resistors, connected in series and final value is ca. 106K. How did you calculated the formula value/voltage? I am not an electric engineer, but I am interested. :)

At least it works well and I got value 3.43V from my 18650 battery.
by adrianmihalko
04 Oct 2016, 20:13
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 42704

Re: Measure VCC

I can't find any 100k resistor around. What else value it can be? I have 91K resistors for example.
by adrianmihalko
03 Oct 2016, 23:04
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

I just received today a BME280 sensor and guess or not it's showing weird values as well as my other sensors. I am comparing values to my weather station. Summary: BMP280 -> +1C above actual temp HTU21D/SI7021 -> -0.5C below actual temp BMP180 -> pretty accurate DHT22 -> -0.5C /humidity totally inac...
by adrianmihalko
03 Oct 2016, 22:06
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 42704

Re: Measure VCC

Thanks, I am going to play with it. ;)
by adrianmihalko
03 Oct 2016, 21:48
Forum: ESP Easy: Software
Topic: Measure VCC
Replies: 66
Views: 42704

Re: Measure VCC

Hi, So...how do I actually measure voltage on Wemos D1 mini with ESP Easy? "WeMos has, just as the NodeMCU board, 2 resistors on the ADC/Tout pin, 100k to ground and 220k to the external ADC pin. This means the ADC is always loaded with 100k which is not allowed when measuring VCC-internal. It resul...
by adrianmihalko
01 Oct 2016, 22:48
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

OK I've found the way to save custom values. It's working now.
Screen-Shot-2016-10-01-22-42-41.jpg
Screen-Shot-2016-10-01-22-42-41.jpg (49 KiB) Viewed 6154 times
I am trying to do a pull request to the original plugin.
by adrianmihalko
01 Oct 2016, 15:47
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

After few hours of researching... I can save input type textbox value, but not checkbox. boolean Plugin_006(byte function, struct EventStruct *event, String& string) { boolean success = false; struct P006Struct { char enabled; unsigned int elevation; }; case PLUGIN_WEBFORM_LOAD: { struct P006Struct ...
by adrianmihalko
01 Oct 2016, 00:50
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

I successfully implemented the formula in the BMP085 plugin, but one thing is not working. How do I save custom variable in EspEasy? case PLUGIN_WEBFORM_SAVE: { String plugin1 = WebServer.arg("_p006_bmp085_sea"); Settings.TaskDevicePluginConfig[event->TaskIndex][0] = (plugin1 == "on"); String plugin...
by adrianmihalko
30 Sep 2016, 19:46
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Thanks Drum, you are right. Yesterday I forget about temperature. If I got more time I am going to look on the plugin, maybe I can modify it to include the conversion formula. :)
by adrianmihalko
29 Sep 2016, 22:16
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Back to my question for pressure conversion: Is there any formula to convert raw pressure reading to the more used mean sea level? (there was an answer for hPa to inHg conversion -> I am not looking for this) Here is what I mean: Mean sea level pressure calculator (converter) – Simple formula On the...
by adrianmihalko
28 Sep 2016, 23:12
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Great, I just found it after 2 weeks. :) Thanks!
by adrianmihalko
28 Sep 2016, 20:31
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

One more question: why is possible to configure only 4 devices in ESP Easy?
by adrianmihalko
28 Sep 2016, 20:27
Forum: ESP Easy: Hardware
Topic: DHT22 Problem
Replies: 25
Views: 16478

Re: DHT22 Problem

I am now trying to calibrate. 24hour with salt in a jar - it should be around 75%. Then I try to put in a jar filled with water - it should be around 100%. SI7021 seem to be accurate out of the box. BMP280 - is measuring +1C out of the box BMP180 - temp OK, pressure little bit different than BMP280 ...
by adrianmihalko
28 Sep 2016, 00:15
Forum: ESP Easy: Hardware
Topic: DHT22 Problem
Replies: 25
Views: 16478

Re: DHT22 Problem

*is too low
by adrianmihalko
27 Sep 2016, 20:58
Forum: ESP Easy: Hardware
Topic: DHT22 Problem
Replies: 25
Views: 16478

Re: DHT22 Problem

My DHT22 is running now a few hours, but the Humidity reading is too high:
Screenshot 2016-09-27 20.54.39.png
Screenshot 2016-09-27 20.54.39.png (76.38 KiB) Viewed 5376 times
:oops:
by adrianmihalko
27 Sep 2016, 17:29
Forum: ESP Easy: Hardware
Topic: DHT22 Problem
Replies: 25
Views: 16478

Re: DHT22 Problem

I had same problem, you must fill in IDX number, after that works, but this should be fixed.
by adrianmihalko
19 Sep 2016, 16:39
Forum: ESP Easy: Hardware
Topic: IR Transmitter ?
Replies: 119
Views: 85162

Re: IR Transmitter ?

No, I checked only my TV. But my AC is on my list. User ToniA made a plugin for Heat Pumps (basically they are AC's with long codes), I am now waiting for support for my remote/AC. Here, I scanned my remote: https://github.com/ToniA/arduino-heatpumpir/issues/11 ...using his tool: https://github.com/...
by adrianmihalko
18 Sep 2016, 21:21
Forum: ESP Easy: Hardware
Topic: IR Transmitter ?
Replies: 119
Views: 85162

Re: IR Transmitter ?

Finally I have time to play again with the IR. ;) Costo, do I need a resistor between GPIO and the base of the transistor? On the schematic I see 1kΩ resistor, on other sites I found 4.7kΩ resistors. EDIT: I just made a quick prototype: IMG_0745.JPG It's working pretty good. Two more questions left ...
by adrianmihalko
18 Sep 2016, 20:42
Forum: ESP Easy: General Discussion
Topic: Some advise for compiling last releases?
Replies: 27
Views: 12658

Re: Some advise for compiling last releases?

Hi, I am trying to compile last release. The source is compiling fine, uploading is done without error. But in serial window I see errors: ets Jan 8 2013,rst cause:2, boot mode:(3,0) load 0x4010f000, len 1384, room 16 tail 8 chksum 0x2d csum 0x2d v09826c6d ~ld ��U PID:0 Version:0 INIT : Incorrect PI...
by adrianmihalko
17 Sep 2016, 19:24
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

...so it's running from last night: Screen-Shot-2016-09-17-18-59-44.png BMP280: seem to be totally inaccurate, the temperature is 1C above of the actual temperature. SI7021: OK / it's showing similar values as my weather station BMP085: OK / it's showing similar values as my weather station BMP280: ...
by adrianmihalko
17 Sep 2016, 00:32
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

I got 3 sensors working. :) 1,Interesting that there is an 1C difference between BMP280 and SI7021. I think this is too much. Screen-Shot-2016-09-17-00-23-54.png 2, Pressure value coming from BMP280 looks like a Raw Pressure Value. Is there any way to get Normalized Sea Level Pressure (it's a more c...
by adrianmihalko
16 Sep 2016, 22:43
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Thanks for the explanation.

At this moment I am connecting my BH1750 sensor on 5V. It would be better to use with 3.3V -or it is does not matter?
by adrianmihalko
16 Sep 2016, 22:26
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

Re: My first Wemos D1 + Easy ESP: need help in wiring

Hi Costo, thank you for the fast response. Is this wiring with pull up resistors correct (4K7 resistor is between SDA/VCC and SCL/VCC)? new.jpg I have this BNP280 board, there are some resistors: http://www.ebay.com/itm/201538104303 ...and there are words about to use logic level converter, what's t...
by adrianmihalko
16 Sep 2016, 21:43
Forum: ESP Easy: General Discussion
Topic: My first Wemos D1 + Easy ESP: need help in wiring
Replies: 29
Views: 16406

My first Wemos D1 + Easy ESP: need help in wiring

Hello all, Finally they are arrived: my Wemos D1 minis. This is my first experience in ESP8266/and overall in Arduino world/. After some bugs between Mac and ESP8266 I finally uploaded ESP Easy firmware, configured and it's working. I connected my first sensor a Lux meter, BH1750 to D1/D2 pins: Unti...
by adrianmihalko
15 Sep 2016, 09:19
Forum: ESP Easy: Hardware
Topic: IR Transmitter ?
Replies: 119
Views: 85162

Re: IR Transmitter ?

Hi costo, I already bought some 2N3904 transistors, because I red that it is not good to directly wire IR LEDs to the pins (because of the mA/pin) - I tried direct connection too, but it worked only from few centimeters. I have TSAL6100 IR LEDs with ratings 5V/100ma. It is possible to drive 3-4 leds...