Search found 51 matches
- 01 Jan 2019, 18:07
- Forum: RFlink: General Discussions
- Topic: Rflink not working at all
- Replies: 1
- Views: 3527
Rflink not working at all
Guys, what I am doing wrong? :( 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R48; 10;version; 20;01;VER=1.1;REV=48;BUILD=04; 10;status; 20;02;STATUS;setRF433=ON;setNodoNRF=OFF;setMilight=OFF;setLivingColors=OFF;setAnsluta=OFF;setGPIO=OFF;setBLE=OFF;setMysensors=OFF; 20;00;Nodo RadioFrequenc...
- 13 Dec 2017, 09:10
- Forum: ESP Easy: Hardware
- Topic: Sonoff reflect state of button to Domoticz
- Replies: 28
- Views: 31547
Re: Sonoff reflect state of button to Domoticz
It is silent as hell.
Of course heavier load it's not working (a tried with a normal bulb and a hair dryer).
But it is still frustrating.
Of course heavier load it's not working (a tried with a normal bulb and a hair dryer).
But it is still frustrating.
- 13 Dec 2017, 08:34
- Forum: ESP Easy: Hardware
- Topic: Sonoff reflect state of button to Domoticz
- Replies: 28
- Views: 31547
Re: Sonoff reflect state of button to Domoticz
me: after turning off my Sonoff S20 (by button, or from app) there is still a 25V AC voltage left in the connector. Why? I connected it to my christmas LED lights, but they are lighting even after turning off, because 25V AC is enough for them to be lit. itead: It's impossible, after turning off, th...
- 13 Dec 2017, 00:29
- Forum: ESP Easy: General Discussion
- Topic: Espeasy watchdog
- Replies: 6
- Views: 10401
Re: Espeasy watchdog
Wow, thanks for the tips guys. I will use both example scripts.
- 13 Dec 2017, 00:25
- Forum: ESP Easy: Hardware
- Topic: Sonoff reflect state of button to Domoticz
- Replies: 28
- Views: 31547
Re: Sonoff reflect state of button to Domoticz
A very frustrating bug in my Sonoff switch: after turning off (by button, or from esp easy) there is still a 25V AC voltage left in the connector (measured with DMM). Why? I connected it to my christmas LED lights, but they are lighting even after turning off, because 25V AC is enough for them to be...
- 16 Nov 2017, 00:36
- Forum: ESP Easy: General Discussion
- Topic: Espeasy watchdog
- Replies: 6
- Views: 10401
Espeasy watchdog
Hi, I am controlling a heater from EspEasy via a relay (xy/control?cmd=GPIO,14,0 and xy/control?cmd=GPIO,14,1). It is possible to write a "watchdog" script (rule) on the EspEasy itself? I mean if there is no connection to the Domoticz (or ping an ip address) turn off GPIO port (xy/control?...
- 20 Sep 2017, 17:29
- Forum: ESP Easy: Hardware
- Topic: E-Paper Module
- Replies: 1
- Views: 2574
E-Paper Module
Any chance for support for a cheap e-paper module like this?
More info:
https://www.youtube.com/watch?v=_-Fk-Z8p18M
More info:
https://www.youtube.com/watch?v=_-Fk-Z8p18M
- 27 Apr 2017, 17:24
- Forum: ESP Easy: Projects / Applications
- Topic: Rain Sensor
- Replies: 26
- Views: 28036
Re: Rain Sensor
Aliexpress delivers a very cheap package to be connected to switch-input of Arduino, Raspberry or ESP8266, or (also) to the analogue-input of those devices. No solution for corrosion on the electrodes, but a few DIY-pins can do the job, like described here Thank you guys, I bought similar rain modu...
- 22 Apr 2017, 23:24
- Forum: ESP Easy: Projects / Applications
- Topic: Rain Sensor
- Replies: 26
- Views: 28036
Re: Rain Sensor
Guys, can you help me with a wiring diagram? I want to connect to an ESP-01, which has limited pins. It is possible?
- 09 Apr 2017, 19:21
- Forum: ESP Easy: General Discussion
- Topic: Water Level Sensor switch
- Replies: 5
- Views: 4718
Re: Water Level Sensor switch
This answer is more than I would expect, thank you very much. I ordered the parts from eBay, can't wait to receive them and start build this project.
- 09 Apr 2017, 12:30
- Forum: ESP Easy: General Discussion
- Topic: Water Level Sensor switch
- Replies: 5
- Views: 4718
Re: Water Level Sensor switch
Hi Shardan,
it's a simple DC 12V water pump.
Yeah, I think I am going this way: connect the switch between the + positive wire of the pump (case 1).
But it still would be great to sense the switch status (open-closed) with ESP (and send notification). What do you think, it is possible?
it's a simple DC 12V water pump.
Yeah, I think I am going this way: connect the switch between the + positive wire of the pump (case 1).
But it still would be great to sense the switch status (open-closed) with ESP (and send notification). What do you think, it is possible?
- 09 Apr 2017, 00:42
- Forum: ESP Easy: General Discussion
- Topic: Water Level Sensor switch
- Replies: 5
- Views: 4718
Water Level Sensor switch
I want to connect to my ESP2866 a Water Level Sensor switch to turn off/disable water pump, when water tank is empty. I am thinking in: 1, physically connect the switch between the water pump's + positive wire - if there is no water the pump cannot start. But in this case I don't get any notificatio...
- 13 Dec 2016, 18:04
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 243462
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
It would be nice to make this Sonoff SC compatible with ESP Easy
https://www.itead.cc/sonoff-sc.html
https://www.itead.cc/sonoff-sc.html
- 13 Nov 2016, 15:05
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90992
Re: Measure VCC
Great, now it's reading correctly. Thanks again!
- 12 Nov 2016, 23:25
- Forum: ESP Easy: General Discussion
- Topic: More Esp-12 Flashing problems
- Replies: 102
- Views: 90233
Re: More Esp-12 Flashing problems
I got "Incorrect PID or version!" + Flash erase is stopping at 127, If am uploading firmware to Wemos from Arduino IDE.
With ESP Easy's classic method flash.cmd+esptool it's working. The key I think is the "-cd nodemcu". Why does this switch matter so much?
With ESP Easy's classic method flash.cmd+esptool it's working. The key I think is the "-cd nodemcu". Why does this switch matter so much?
- 10 Nov 2016, 18:45
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90992
Re: Measure VCC
Thanks, I found some more resistors, connected in series and final value is ca. 106K. How did you calculated the formula value/voltage? I am not an electric engineer, but I am interested. :) At least it works well and I got value 3.43V from my 18650 battery. Back to my question for a while. With my...
- 06 Nov 2016, 23:11
- Forum: ESP Easy: Projects / Applications
- Topic: Tipping bucket rain gauge -> Pulse counter
- Replies: 30
- Views: 34526
Re: Tipping bucket rain gauge -> Pulse counter
It would be great to run from batteries. Anybody did thing like this? How long can it run from batteries?
- 05 Nov 2016, 22:25
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 721808
Re: New ESP gadget
Is there any chance to get Power Consumption Measurement with ESP Easy?
https://www.itead.cc/smart-home/sonoff-pow.html
https://www.itead.cc/smart-home/sonoff-pow.html
- 02 Nov 2016, 16:34
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
It is OK that my ESP modules (Wemos, NodeMCU) won't see my Wifi-N network? Only Wifi-G is available.
- 17 Oct 2016, 21:42
- Forum: ESP Easy: Software
- Topic: ESP Easy next stable... (release candidates)
- Replies: 155
- Views: 122778
Re: ESP Easy next stable... (release candidates)
Wiki recommendation: you should add a more visible URL to this forum on front page of the Wiki (esp8266.nu), at this moment it's well hidden on the center of the page.
- 15 Oct 2016, 19:37
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Hmm, I connected to 3V output and now it's working fine. Interesting, because the relay is an 5V module.
Another interesting thing, that the relay switch on when GPIO is pulled down curl 192.168.1.4/control?cmd=GPIO,14,0 -> it has reverse logic?
Another interesting thing, that the relay switch on when GPIO is pulled down curl 192.168.1.4/control?cmd=GPIO,14,0 -> it has reverse logic?
- 15 Oct 2016, 19:23
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Hi, I connected a relay module to my Wemos D1 (firmware Esp Easy): VCC to 5V, GND to GND, In1 to GPIO14 (D5) The problem: the relay is always on (the red led is lighting). I tried to switch off: $ curl 192.168.1.4/control?cmd=GPIO,14,0 { "log": "GPIO 14 Set to 0", "plugin&qu...
- 11 Oct 2016, 21:17
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Ahhh, double checked everything and I had in Domoticz an ON/OFF command: http://192.168.1.4/control?cmd=GPIO,2,1.......which turned on the LED.
Thanks for the help.
Thanks for the help.
- 10 Oct 2016, 08:35
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
So I "calibrated" sensors using formula and they seem to be accurate now.
I still not understand when/why the blue LED is lighting on my Wemos D1 mini. My first tought was that this is connected to D4 min, but even If I moved from that pin to other it is still lighting.
I still not understand when/why the blue LED is lighting on my Wemos D1 mini. My first tought was that this is connected to D4 min, but even If I moved from that pin to other it is still lighting.
- 04 Oct 2016, 23:53
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90992
Re: Measure VCC
Thanks, I found some more resistors, connected in series and final value is ca. 106K. How did you calculated the formula value/voltage? I am not an electric engineer, but I am interested.
At least it works well and I got value 3.43V from my 18650 battery.
At least it works well and I got value 3.43V from my 18650 battery.
- 04 Oct 2016, 20:13
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90992
Re: Measure VCC
I can't find any 100k resistor around. What else value it can be? I have 91K resistors for example.
- 04 Oct 2016, 09:48
- Forum: ESP Easy: Hardware
- Topic: Mac OS Sierra & Wemos D1
- Replies: 2
- Views: 3809
- 03 Oct 2016, 23:04
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
I just received today a BME280 sensor and guess or not it's showing weird values as well as my other sensors. I am comparing values to my weather station. Summary: BMP280 -> +1C above actual temp HTU21D/SI7021 -> -0.5C below actual temp BMP180 -> pretty accurate DHT22 -> -0.5C /humidity totally inac...
- 03 Oct 2016, 22:06
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90992
Re: Measure VCC
Thanks, I am going to play with it.
- 03 Oct 2016, 21:48
- Forum: ESP Easy: Software
- Topic: Measure VCC
- Replies: 66
- Views: 90992
Re: Measure VCC
Hi, So...how do I actually measure voltage on Wemos D1 mini with ESP Easy? "WeMos has, just as the NodeMCU board, 2 resistors on the ADC/Tout pin, 100k to ground and 220k to the external ADC pin. This means the ADC is always loaded with 100k which is not allowed when measuring VCC-internal. It ...
- 01 Oct 2016, 22:48
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
OK I've found the way to save custom values. It's working now.
I am trying to do a pull request to the original plugin.- 01 Oct 2016, 15:47
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
After few hours of researching... I can save input type textbox value, but not checkbox. boolean Plugin_006(byte function, struct EventStruct *event, String& string) { boolean success = false; struct P006Struct { char enabled; unsigned int elevation; }; case PLUGIN_WEBFORM_LOAD: { struct P006Str...
- 01 Oct 2016, 00:50
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
I successfully implemented the formula in the BMP085 plugin, but one thing is not working. How do I save custom variable in EspEasy? case PLUGIN_WEBFORM_SAVE: { String plugin1 = WebServer.arg("_p006_bmp085_sea"); Settings.TaskDevicePluginConfig[event->TaskIndex][0] = (plugin1 == "on&q...
- 30 Sep 2016, 19:46
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Thanks Drum, you are right. Yesterday I forget about temperature. If I got more time I am going to look on the plugin, maybe I can modify it to include the conversion formula.
- 29 Sep 2016, 22:16
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Back to my question for pressure conversion: Is there any formula to convert raw pressure reading to the more used mean sea level? (there was an answer for hPa to inHg conversion -> I am not looking for this) Here is what I mean: Mean sea level pressure calculator (converter) – Simple formula On the...
- 28 Sep 2016, 23:12
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Great, I just found it after 2 weeks. Thanks!
- 28 Sep 2016, 20:31
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
One more question: why is possible to configure only 4 devices in ESP Easy?
- 28 Sep 2016, 20:27
- Forum: ESP Easy: Hardware
- Topic: DHT22 Problem
- Replies: 25
- Views: 32425
Re: DHT22 Problem
I am now trying to calibrate. 24hour with salt in a jar - it should be around 75%. Then I try to put in a jar filled with water - it should be around 100%. SI7021 seem to be accurate out of the box. BMP280 - is measuring +1C out of the box BMP180 - temp OK, pressure little bit different than BMP280 ...
- 28 Sep 2016, 00:15
- Forum: ESP Easy: Hardware
- Topic: DHT22 Problem
- Replies: 25
- Views: 32425
Re: DHT22 Problem
*is too low
- 27 Sep 2016, 20:58
- Forum: ESP Easy: Hardware
- Topic: DHT22 Problem
- Replies: 25
- Views: 32425
Re: DHT22 Problem
My DHT22 is running now a few hours, but the Humidity reading is too high:
- 27 Sep 2016, 17:29
- Forum: ESP Easy: Hardware
- Topic: DHT22 Problem
- Replies: 25
- Views: 32425
Re: DHT22 Problem
I had same problem, you must fill in IDX number, after that works, but this should be fixed.
- 19 Sep 2016, 16:39
- Forum: ESP Easy: Hardware
- Topic: IR Transmitter ?
- Replies: 120
- Views: 195377
Re: IR Transmitter ?
No, I checked only my TV. But my AC is on my list. User ToniA made a plugin for Heat Pumps (basically they are AC's with long codes), I am now waiting for support for my remote/AC. Here, I scanned my remote: https://github.com/ToniA/arduino-heatpumpir/issues/11 ...using his tool: https://github.com/...
- 18 Sep 2016, 21:21
- Forum: ESP Easy: Hardware
- Topic: IR Transmitter ?
- Replies: 120
- Views: 195377
Re: IR Transmitter ?
Finally I have time to play again with the IR. ;) Costo, do I need a resistor between GPIO and the base of the transistor? On the schematic I see 1kΩ resistor, on other sites I found 4.7kΩ resistors. EDIT: I just made a quick prototype: IMG_0745.JPG It's working pretty good. Two more questions left ...
- 18 Sep 2016, 20:42
- Forum: ESP Easy: General Discussion
- Topic: Some advise for compiling last releases?
- Replies: 27
- Views: 27060
Re: Some advise for compiling last releases?
Hi, I am trying to compile last release. The source is compiling fine, uploading is done without error. But in serial window I see errors: ets Jan 8 2013,rst cause:2, boot mode:(3,0) load 0x4010f000, len 1384, room 16 tail 8 chksum 0x2d csum 0x2d v09826c6d ~ld ��U PID:0 Version:0 INIT : Incorrect PI...
- 17 Sep 2016, 19:24
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
...so it's running from last night: Screen-Shot-2016-09-17-18-59-44.png BMP280: seem to be totally inaccurate, the temperature is 1C above of the actual temperature. SI7021: OK / it's showing similar values as my weather station BMP085: OK / it's showing similar values as my weather station BMP280: ...
- 17 Sep 2016, 00:32
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
I got 3 sensors working. :) 1,Interesting that there is an 1C difference between BMP280 and SI7021. I think this is too much. Screen-Shot-2016-09-17-00-23-54.png 2, Pressure value coming from BMP280 looks like a Raw Pressure Value. Is there any way to get Normalized Sea Level Pressure (it's a more c...
- 16 Sep 2016, 22:43
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Thanks for the explanation.
At this moment I am connecting my BH1750 sensor on 5V. It would be better to use with 3.3V -or it is does not matter?
At this moment I am connecting my BH1750 sensor on 5V. It would be better to use with 3.3V -or it is does not matter?
- 16 Sep 2016, 22:26
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
Re: My first Wemos D1 + Easy ESP: need help in wiring
Hi Costo, thank you for the fast response. Is this wiring with pull up resistors correct (4K7 resistor is between SDA/VCC and SCL/VCC)? new.jpg I have this BNP280 board, there are some resistors: http://www.ebay.com/itm/201538104303 ...and there are words about to use logic level converter, what's t...
- 16 Sep 2016, 21:43
- Forum: ESP Easy: General Discussion
- Topic: My first Wemos D1 + Easy ESP: need help in wiring
- Replies: 29
- Views: 31191
My first Wemos D1 + Easy ESP: need help in wiring
Hello all, Finally they are arrived: my Wemos D1 minis. This is my first experience in ESP8266/and overall in Arduino world/. After some bugs between Mac and ESP8266 I finally uploaded ESP Easy firmware, configured and it's working. I connected my first sensor a Lux meter, BH1750 to D1/D2 pins: Unti...
- 15 Sep 2016, 09:19
- Forum: ESP Easy: Hardware
- Topic: IR Transmitter ?
- Replies: 120
- Views: 195377
Re: IR Transmitter ?
Hi costo, I already bought some 2N3904 transistors, because I red that it is not good to directly wire IR LEDs to the pins (because of the mA/pin) - I tried direct connection too, but it worked only from few centimeters. I have TSAL6100 IR LEDs with ratings 5V/100ma. It is possible to drive 3-4 leds...