Let's Control It

insippo

I do not know it is working but i flash it with image for 8285. Working. I use os x and esptool. I do not have no one comp with windows.

insippo

hei girls ???

insippo

Can anybody upload this compiled firmware to.... Google drive and share it.

insippo

I bought month ago Sonoff wifi switches. I do not flash these first time but with these ...i do not know what. Esp chip is 8266. Flashing goes norm but after reboot i do not see ESP_0 wifi. I use Os X and esptool. What and how i need ? I try ESPEasy_v2.0.0-dev11_normal_1024.bin and after this R120 5...

insippo

https://photos.app.goo.gl/h514IfpM7Wkn723V2

https://photos.app.goo.gl/h514IfpM7Wkn723V2

Maybe working with 3k9 resistor

https://photos.app.goo.gl/dSUnDLFJSV4u9MCb2

insippo

I build relay for water boiler and wnat to add temp sensor too. I have Raspberry Pi Domoticz server. This nrf24L01 is not good choice. Today working and tomorrow not.

insippo

Sonoff have one free GPIO 14.Where is tx ,rx,3,3v and gnd. Can i connect this ds18b20 to these pins ? And. How big resistor ? I check link.

Merry Christmas dudes !

insippo

I flashing Sonoff wifi relay with Espeasy. All is good. Working perfect. It is possible to add sonoff 2 pcs ds18b20 ?

insippo

I download all plugins and put these to Arduino folder. I upload to h801 EspEasy r120 512kb version. Working good and connected to my home network.
I have this plugin P105 rgbw. What is next ?

insippo

I read post but not understand how to get work this rgbww controller.I know how to upload firmware but what need upload ?

insippo

I reflash it and reconfigure.I do not know where my pass goes.

. I put it send data every 15 sec and after this was crash. But all is okay again and working.

insippo

I do not remember esp easy r120 web interface password. I connect together tx and rx and powered module for 5 sec. After reboot i see old ip. Esp not working in AP mode and i can't login. How to resolve this ? I soldered some wires to esp and this is working for domoticz outdoor luxmeter.

insippo

This company bought these ftdi serial converters from China and..... Yes. End price is 19.90€. Like arduino nano in us shop 18€.

insippo

Thank you. I try.

insippo

This is easy. Thank you. What pins connect relays to esp-07 ?

insippo

I check but without results. This is possible with R120 or R147 ? I want only connect relay on and off. Time for switch on i want to set in Domoticz.

insippo

I use linux maybe 10 years or 15. :) This is my first and last FTDI programmer. I do not use this every week, every month. But every year. Last 5. Working or not. I do not know exactly. From where and what module is perfect ? This is really not good? https://www.aliexpress.com/item/Free-shipping-FT2...

insippo

I have one from these 2.
NO . I have this https://www.aliexpress.com/item/Free-sh ... .15.CqyWkw

insippo

FTDI i bought from Aliexpress. Aliexpress is wonderland. https://www.aliexpress.com/wholesale?ltype=wholesale&d=y&origin=y&isViewCP=y&catId=0&initiative_id=AS_20170412005108&SearchText=ftdi+usb&blanktest=0&tc=af This is better. https://www.aliexpress.com/item/10PCS-LO...

insippo

https://goo.gl/photos/4H4FwXhrVCNGFpeD6

I solder to back side voltage regulator ht7833 and using for programming Gizwitz esp-12f bottom sIde. Works good.

insippo

This is good tutorial. Thank you.

insippo

I try with separate power supply.

insippo

I have usb ttl converter and i use linux. 3,3v to vcc,gnd to gnd, tx to rx, rx to tx, esp-07 ch-pd to 3,3v and fpr program gpio to gnd. I use esptool. All is ok and esp easy uploaded. After this i unconnect gpio0 and tx and rx and powering esp-07.Nothing. I upload esp easy R120 1024 version.

insippo

I connect GPIO16 to REST. In Main Settings window Sensor delay needed to set 600=10 min and then sleep mode. In Devices tab edit sensor : Delay need set 0 ?

insippo

Okay.
Thank you.

insippo

I use esp-12f. I need to connect GPIO-16 with the RST pin ?

insippo

Thank you. Tomorrow i tray if i find time. This is easier than mysensors with billoim wires

If my wifi signal reaches out.
What GPIO nr. need use ?

insippo

Yes. These 2 connectors

insippo

This is great.!
Question about esp connection to electricity meter. How to connect directly to meter ? Without ldr or photo diode. My electrycity meter has 2 contacts for this.

insippo

Working today. Wifi signal is low. I have question about from deep sleep mode. If i set report time 300 sec. Esp-12f goes to sleep and wake up after 300 sec and connect to wifi network and send data ?

insippo

I have antenna with pigtail. Small. I bought from Ali esp-07 but receivng time is long. Easp easy working good with luxmeter and with signal strenght -82db.

insippo

Thank from answer. I bought from Aliexpress esp-07. Ali is cheaper than Ebay. Yesterday i check wifi signal strenght in home. If i close this esp to box, signal was -66db. If box is open signal is -54db. I use this junction box for esp in same place outdoor and working. Measure battery voltage. I wa...

insippo

Thank you. I have Domoticz. After work i check.I do not remember what i write to this box. Maybe sirgnal is too low. This sensor located inside this box. http://www.parsakhgar.com/images/CW%20Type%20Cable%20Glands.jpg . Wifi ap is 140m. I check signal with cellular and all was okay. I do not know mo...

insippo

How to set reporting time. At the moment luxmeter report every 20 min. This time is too long.

insippo

My electricity meter is 800 imp per kwh. How to configure esp for domoticz ?

insippo

Can i use esp-12f for pulse counter on electrycity meter with installed photo resistor ?

Search found 36 matches

Re: Sonoff Basic - AP not apearing on first boot with pre-built BIN

Re: H801 rgbw plugin install

Re: H801 rgbw plugin install

Re: Sonoff Basic - AP not apearing on first boot with pre-built BIN

Re: Add to Sonoff ds18b20

Re: Add to Sonoff ds18b20

Re: Add to Sonoff ds18b20

Add to Sonoff ds18b20

Re: H801 rgbw plugin install

H801 rgbw plugin install

Re: Lost web esp easy password

Lost web esp easy password

Re: ESP-07 flashing

Re: ESP8266 relay for domoticz

Re: ESP8266 relay for domoticz

ESP8266 relay for domoticz

Re: ESP-07 flashing

Re: ESP-07 flashing

Re: ESP-07 flashing

Re: ESP-07 flashing

Re: ESP-07 flashing

Re: ESP-07 flashing

ESP-07 flashing

Re: Luxmeter BH1750 reporting time increase

Re: Pulse Counter

Re: Luxmeter BH1750 reporting time increase

Re: Pulse Counter

Re: Pulse Counter

Re: Pulse Counter

Re: Luxmeter BH1750 reporting time increase

Re: Luxmeter BH1750 reporting time increase

Re: Luxmeter BH1750 reporting time increase

Re: Luxmeter BH1750 reporting time increase

Luxmeter BH1750 reporting time increase

Re: Pulse Counter

Pulse conter esp-12F