Let's Control It

rol-rider

Wh_tot ?
without load quickly rose to 20 ??
do you have an explanation ?
if load = 0 ......... Watt = 0

rol-rider

I managed to use the plugin and it works !

wiring:

result:

I have the binary file, if some are interested, I will publish it.

rol-rider

I managed to compile a version with the P224_DDS238 plugin. But ? I can't get it to work! I don't know how to wire it? What is "Port Software serial" for? Can someone use this plugin? and will be able to inform me? thank you Material and wiring used https://nsm09.casimages.com/img/2020/03/...

rol-rider

Hello,
good idea this plugin, nice job @jm_araujo.
I would like to test, with my DDS238, but impossible for me to compile the sources.
is there a binary file with this plugin?
Sorry for my English ! Google Translate !

rol-rider

Ah OK. impossible to set the interval to 0. but with 1, still nothing. I tried with a dummy, it does not work. I compared in IDE Arduino the plugin P080 iButton and P004 Dallas. line 120 // string += String (ExtraTaskSettings.TaskDevicePluginConfigLong [x], HEX); is this normal the //? in front of S...

rol-rider

yes when the Ibutton is not present. value=0
but nothing in the controller.

rol-rider

Hello, I'm testing the iButton plugin. GIT version: mega-20181028 https://nsm09.casimages.com/img/2018/11/06//18110605310715377715984033.png I have two problems. --I do not get anything on the controller. --the port is not filled. https://nsm09.casimages.com/img/2018/11/06//1811060531061537771598403...

rol-rider

Hello, sorry for my English ... google translation and congratulations for the devellopement of ESPEasy. I am testing ESP32 on ESP32DEVKITV1 card. i flashed (--chip esp32 --port COM3 --baud 256000 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_fo 80m --flash_size d...

rol-rider

the wiring seems to me wrong.
the level converter? where is the HV and LV connected?
normally
HV = 5V of the RDM6300
LV = 3.3v from wemos
...Google Translate

rol-rider

Hello,
would it be possible to decrease the size of the files.
with webdumper .... 2.41M !
with capture tool .... 41K, better for forums.
thank

rol-rider

Yessssssssss 0.00.012 works
It works. Still thank you.
I'm going to take advantage of the French jeedom

rol-rider

thank you for the answer
however, he is in the same folder

: CaptureDossier.PNG (31.18 KiB) Viewed 4312 times

rol-rider

Hello, sorry for my limited english (google translate) thank you for this work. I wanted to test! but I can not find the screenshot? the LOG folder does not contain a screenshot. is this normal? I wonder if I understood how it works? CaptureLog.PNG I only have 3 files in the LOG folder I use windows...

rol-rider

sorry for my english (google translation)

check that relay 4 is not associated with a 433Mhz module.

(probe "oregon 433Mhz" for example)

rol-rider

Chez moi, ça fonctionne (en DEV 12) et je suis chez Free.fr
mais tous les mails arrivent comme des spams et je ne les voyais donc pas au début.

rol-rider

Hello
same problem at home.
can not configure two RFID devices on a wemos?

The version used is release v2.0.0-dev12

: CaptureDevice2.PNG (34.05 KiB) Viewed 5792 times

the RFID tag is connected on gpio 12/13 and it is the other one that works ?
the device 4 does not work anymore.

rol-rider

http://www.letscontrolit.com/forum/view ... =18&t=2954

rol-rider

@ homeautomator24,

sonoff pow is 1M not 4M.

I had the same thing through OTA.

I have (with USB serial adapter)
--flash R120 V1(file ESPEasy_R120_1024.bin)
(wait erase sector)
--and flash the file in V2.0.0
after it's good.

sorry for my English (google translate)

rol-rider

I compiled the new file.
available on the forum jeedom

https://www.jeedom.com/forum/viewtopic. ... 12#p517212

rol-rider

OK !
its good
and even with vcc 3.3V

rol-rider

Hello,
I tested both sensors.
the hc-SR04 ------- distance = 180cm - ok ---- distance <to 20cm --- ok
the JSN-SR04T --- distance = 180cm - ok --- distance <to 20cm --- NOK

the JSN-SR04T looks less good for distances <20cm

excuse me for English .... google translate

rol-rider

Great !
I ordered this sensor.(JSN-SR04T)
thank you for your work.

rol-rider

Ok for this bug! That I had not understood. (Google translate... or me!) Rest The I current! With these two measures http://nsm07.casimages.com/img/2017/07/31//17073107134215377715182760.png Bulb, correct value. http://nsm07.casimages.com/img/2017/07/31//17073107134315377715182761.png toaster ? Only...

rol-rider

Hi, I think I have found my problem! I calibrated with the "bulb" values: xxx.xxx.x.xx / control? cmd = hlwcalibrate, 234,0.25,60 Calibration values in the plugin Current Multiplier = 1849.00 Voltage Multiplier = 442689.56 Power Multiplier = 12168954.98 Reading with the espeasy bulb P = 59...

rol-rider

Hello, I calibrated by noting and checking the "calibration values" When the calibration is done on the toaster (no thermostat). The values correspond to my readings (multimeter). If I connect the radiator: Read value with espeasy 489W 2.56A 225V 85PF --- OK But when I use a bulb (60W inca...

rol-rider

Hello, I think there is a problem with the value I (Current). My calibration was: Xxx.xxx.x.xx / control? Cmd = hlwcalibrate, 234,0.25,58.5 For the bulb the values are good. I tested with a toaster (750W) Everything looks good except I (Current) = 0.43A this is not possible! http://nsm07.casimages.c...

rol-rider

is a Incandescent light bulb (resistor)

Calibration done with the radiator data.

The bulb can not consume 1.96A ! but 0.25A With my multimeter.

I continue my tests, thank.

rol-rider

I have a calibration problem. 1 - I calibrated with a 50W bulb ---- reading ok. 2 - I connected a 500W electric radiator ---- fake reading. 3 - I calibrated with the measured values (multimeter) of the radiator ---- reading ok 4 - I connected the bulb.----fake reading P and V = ok. I = nok (1.94A re...

rol-rider

J'ai testé chez moi sur Jeedom. sorry I do not speak English ! http://nsm07.casimages.com/img/2017/07/27//17072712491715377715173279.png Après Calibration (ampoule 60W) http://nsm07.casimages.com/img/2017/07/27//17072710374215377715173429.png ça fonction très bien pour mes premiers tests ! bravo et ...

rol-rider

http://www.letscontrolit.com/wiki/index.php/ESPEasyMega

rol-rider

And your IP (192.168.1.105) on Web browser
you have nothing ?
no main page ?

rol-rider

and Arduino serial Monitor to work.

: CaptureBxt.PNG (21.78 KiB) Viewed 4875 times

Wifi : connected or not ?

sorry my English is limited !

rol-rider

ok, thank you for the clarification.

rol-rider

Great ! it works !

this is the ":" I forgot!

Code: Select all

http://192.168.0.3/control?cmd=rtttl,14:d=8,o=5,b=180,c6,b,c6,p,g,g-,p,f,b,c6,p,d6,p,g,p,c6,b,c6,p,d6,p,f,g,g-,4p,g,f,4d-

beautiful melody

rol-rider

Thanks, I still managed to use "tone" in rules: On BP#BP do tone,14,435,600 tone,14,580,600 tone,14,435,600 tone,14,580,600 tone,14,435,600 tone,14,580,600 tone,14,435,600 tone,14,580,600 endon French police siren but "rtttl" ??? I test the new file.

rol-rider

Great idea,
I wanted to test,

_P001_Switch.rar

it does not compile.

Code: Select all

296  log = String(F("SW   : GPIO ")) + String(event->Par1) + String(F(" Set PWM to ")) + String(webreq);

exit status 1
'webreq' was not declared in this scope

thank.

sorry I do not speak English!

rol-rider

I am French and did not understand much English. google translation is my friend! I am of the ZX81 generation. I'm about jeedom forum, but the info is here! congratulations for ESPEasy is great. My first module: OpenGarage ! http://nsm08.casimages.com/img/2016/10/05//16100512503515377714535783.jpg

Search found 37 matches

Re: New plugin for DDS238-1

Re: New plugin for DDS238-1

Re: New plugin for DDS238-1

Re: New plugin for DDS238-1

Re: 1-Wire IButton

Re: 1-Wire IButton

Re: 1-Wire IButton

Re: ESP32

Re: rfid em4100 tag at 125khz with a RDM6300 reader

Re: ESP Easy Webdumper

Re: ESP Easy Webdumper

Re: ESP Easy Webdumper

Re: ESP Easy Webdumper

Re: Sonoff 4CH Pro Questions - Odd problem

Re: notify mail

Re: Two RFID Wiegand Reader

Re: envoie de notification par mail

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Distance Sensors HC-SR04, JSN-SR04T and more

Re: Distance Sensors HC-SR04, JSN-SR04T and more

Re: Distance Sensors HC-SR04, JSN-SR04T and more

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?

Re: Easp Easy 147 Mega

Re: Wemos D1 Mini - cannot connect after 1st boot

Re: Wemos D1 Mini - cannot connect after 1st boot

Re: Speaker function ?

Re: Speaker function ?

Re: Speaker function ?

Re: Speaker function ?

Hello from France