Search found 497 matches
- 14 Jun 2019, 08:15
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 208611
Re: Arduino Easy 2560
thanks a lot!
- 10 Jun 2019, 07:06
- Forum: Experimental
- Topic: Arduino Easy 2560
- Replies: 130
- Views: 208611
Re: Arduino Easy 2560
I decided to patch ArduinoEasy to run on my STM32F103RCT6 Development Board + W5500 Ethernet network module combination ($6.5 + $3) instead of the default Arduino Mega 2560 + Arduino Ethernet Shield. I think it is done, at least it compiles and run on my hardware. :) Do not expect much support or d...
- 19 May 2019, 12:39
- Forum: ESP Easy: Projects / Applications
- Topic: zigbee extender/repeater
- Replies: 3
- Views: 12182
Re: zigbee extender/repeater
I don't think it makes sense to combine a whole network (zigbee) which is mesh based and requires different approach with ESPEasy; I can't see how it should be working... My zigbee network is quite big, more than 30 devices and one coordinator (used from Home Assistant) plus several repeater to expa...
- 03 May 2019, 07:10
- Forum: ESP Easy: Hardware
- Topic: No I2C with Sonoff 4CH R2
- Replies: 7
- Views: 21651
Re: No I2C with Sonoff 4CH R2
Here is the known GPIO list for the Sonoff 4CH R2: GPIO 00 - Button 1 GPIO 04 - Relay 3 GPIO 05 - Relay 2 GPIO 09 - Button 2 GPIO 10 - Button 3 GPIO 12 - Relay 1 GPIO 13 - WiFi LED GPIO 14 - Button 4 GPIO 15 - Relay 4 Then there are chances you can't use I2C with yout sonoff 4CH Pro due to the fact...
- 21 Apr 2019, 08:19
- Forum: ESP Easy: Hardware
- Topic: No I2C with Sonoff 4CH R2
- Replies: 7
- Views: 21651
Re: No I2C with Sonoff 4CH R2
As far as I know the standard I2C pins are GPIO4 and GPIO5 and I use them in quite few projects....ajheyworth wrote: ↑20 Apr 2019, 09:06 Q1. Trawling the internet it would seem that GPIO 01 and GPIO 03 are used for I2C. Does anyone else concur?
- 19 Apr 2019, 11:02
- Forum: ESP Easy: Hardware
- Topic: AC DIMMER PWM NODEMCU
- Replies: 4
- Views: 13924
Re: AC DIMMER PWM NODEMCU
the circuit itself does *nothing* withtout a proper firmware loaded into the ATtiny85; acually it's the same circuit of the initial post with added microcontroller to handle the synchronization with the main voltage frequency...
- 10 Jan 2019, 07:13
- Forum: ESP Easy: Projects / Applications
- Topic: ESP8266 Thermostat
- Replies: 44
- Views: 98352
Re: ESP8266 Thermostat
great project, well done!!!
I may give a small advice... make the display not always "ON" else you will need to replace the OLED module every 3/4 months due to the fast worn out
I may give a small advice... make the display not always "ON" else you will need to replace the OLED module every 3/4 months due to the fast worn out
- 17 Dec 2018, 07:25
- Forum: ESP Easy: Software
- Topic: tm1637 to display some alpha chracters?
- Replies: 6
- Views: 13229
Re: tm1637 to display some alpha chracters?
this features is already there since 1 month --> http://www.letscontrolit.com/forum/viewtopic.php?f=5&t=3512&start=150#p33189 "7dtext" has been implemented with both TM1637 and MAX7219 Sorry for not knowing this papperone. I must really ramp up my documentation. No sorry I know ho...
- 16 Dec 2018, 22:43
- Forum: ESP Easy: Software
- Topic: tm1637 to display some alpha chracters?
- Replies: 6
- Views: 13229
Re: tm1637 to display some alpha chracters?
this features is already there since 1 month --> http://www.letscontrolit.com/forum/view ... 150#p33189
"7dtext" has been implemented with both TM1637 and MAX7219
"7dtext" has been implemented with both TM1637 and MAX7219
- 11 Dec 2018, 07:12
- Forum: ESP Easy: General Discussion
- Topic: Can't compile with a new plugin (PZEM004T)
- Replies: 22
- Views: 43591
Re: Can't compile with a new plugin (PZEM004T)
Solution works but it's dirty because as soon as you update the PZEM library it won't work again...
I was thinking to remove this library dependencies before to include this pluing in the standard REP but still not time to complete this task...
I was thinking to remove this library dependencies before to include this pluing in the standard REP but still not time to complete this task...
- 06 Dec 2018, 06:58
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
that's vcery weird as all my displays of different brands and configuration works perfectly... as well the code in the plugin is writte following the spec of the datasheet of the supported IC, which I guess it's the same with the library you pointed and it's first time I've got reported such behavio...
- 04 Dec 2018, 22:19
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
Have you tried to swap CLK and DIO pin setting on the device config (not touching the physical wiring)?
- 03 Dec 2018, 20:42
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
To be able to change modes remotely per command generally makes sense, imho. What would happen if you just remove the break from the command functions? Not sure it's a good practice, I will implement new command to change module mode so user can use it in rules with timers... Alternating between cl...
- 02 Dec 2018, 20:48
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
I have a different remark though. It seems one can switch only between manual mode and clock/date display via the plugin's page. Wouldn't it make sense to allow the switch to be made via command? well never thought about it as I couldn't think of a use-case scenario where this can be used, if you t...
- 02 Dec 2018, 09:18
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
Obviously I miss something - Is it solution for two TM 1637 displays release or not? Not yet, still need to rework some part of the plugin to enable multiple displays handling... sorry ! I have a four-digit display with both, dots and a colon (8.8.:8.8.). It seems that I cannot address the dots. In...
- 27 Nov 2018, 16:14
- Forum: ESP Easy: Projects / Applications
- Topic: [solved] ESP8266(ESP-12E) et DS18B20 error
- Replies: 13
- Views: 19424
Re: ESP8266(ESP-12E) et DS18B20 error
I think you should power the sensor with 3V3 and not 5V, you can damage ESP8266 gpios (despite someone says it's doable, espressif datasheet states gpios are 3v3 tolerant).
- 26 Nov 2018, 12:59
- Forum: ESP Easy: General Discussion
- Topic: how to correctly flash D1 mini Pro
- Replies: 6
- Views: 15019
Re: how to correctly flash D1 mini Pro
Yes the new Lolin "Wemos D1 mini Pro" is actually equipped with a battery connection. Also bridging pads on the back. By the way, it's totally undeliverable that Lolin is using the same name for a completely new design. Sure they bought the Wemos company but use a new name for God's sake!...
- 26 Nov 2018, 08:34
- Forum: ESP Easy: General Discussion
- Topic: how to correctly flash D1 mini Pro
- Replies: 6
- Views: 15019
Re: how to correctly flash D1 mini Pro
afaik D1 Mini Pro does *not* have a battery connector/manager, it's just with more flash memory which is not used (as per my knowledge) by ESPEasy...
- 25 Nov 2018, 17:54
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
Just found this one , should I order it? 8-) wow that's massive, but at that level I would rather implement a real RGB dot matrix display like this https://www.aliexpress.com/item/P3-RGB-pixel-panel-HD-display-64x32-dot-matrix-p3-smd-rgb-led-module/32728985432.html it's twice bigger and cost much l...
- 25 Nov 2018, 09:20
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
I do as well, now I need time to play some fun coding in a brand new plugingrovkillen wrote: ↑24 Nov 2018, 22:23I got 1,2,3,4 dot matrix MAX7219 based units.papperone wrote: ↑ .... meanwhile I will work on a new plugin to support MAX7219 dot-matrix displays
I'll let you konw when I've some draft code so you can help me testing it!
- 24 Nov 2018, 19:47
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
are, or will ever be, these modules supported? https://it.aliexpress.com/item/74HC595-74HC164-8-Bits-8-Bit-Digit-LED-Nixie-Tube-Display-Module-Red-Tube-Board/32672425544.html I tested again (as I do have it) both these displays and as well the ones based on TM74HC595 and I can confirm they are not ...
- 23 Nov 2018, 23:42
- Forum: Introduce yourself
- Topic: Ciao from Italy ! :)
- Replies: 2
- Views: 8318
Re: Ciao from Italy ! :)
"Benvenuto"
- 17 Nov 2018, 09:14
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
Sorry for the delay but finally I managed to release new version of my plugin (thanks to TD-er to help on sort out the mess!). Below new functions/commands available, still not able to work on the issue that does not allow multiple displays :( Obviously some of the letters can't be shown properly bu...
- 06 Nov 2018, 19:24
- Forum: Staff Announcements forum
- Topic: Reference project for the upcoming homepage
- Replies: 28
- Views: 51418
Re: Reference project for the upcoming homepage
In the wiki I posted few of the project I've already finalized and I do have few more I'm working with but still under testing... Have a look and let me know if you want to include any of them and eventually if you need more picures or better/different descriptive text: https://www.letscontrolit.co...
- 30 Oct 2018, 09:04
- Forum: Staff Announcements forum
- Topic: Reference project for the upcoming homepage
- Replies: 28
- Views: 51418
Re: Reference project for the upcoming homepage
In the wiki I posted few of the project I've already finalized and I do have few more I'm working with but still under testing... Have a look and let me know if you want to include any of them and eventually if you need more picures or better/different descriptive text: https://www.letscontrolit.com...
- 08 Oct 2018, 20:53
- Forum: Introduce yourself
- Topic: Hi from Italy
- Replies: 3
- Views: 8917
Re: Hi from Italy
Benvenuto
- 26 Sep 2018, 14:31
- Forum: Staff Announcements forum
- Topic: Giveaway! 20pcs of programmers
- Replies: 53
- Views: 153045
Re: Giveaway! 20pcs of programmers
Received mine today and already tested flashing a test unit I'm currently working with (an advanced LED Strip controller with 5 channels) and it worked just great!
It is now my default programmer on my workbench!
It is now my default programmer on my workbench!
- 26 Sep 2018, 14:28
- Forum: ESP Easy: Software
- Topic: use of switches to manage lights in the house
- Replies: 3
- Views: 8627
Re: use of switches to manage lights in the house
I use a lot communication betweem modules and as well my protocol is MQTT. I don't have any delays and the only possibility I can think of is the "MQTT MESSAGE DELAY" parameters in the TOOLS/ADVANCED screen which could be way too high. I set it on 100ms to have a very responsive messages r...
- 18 Sep 2018, 08:40
- Forum: ESP Easy: Projects / Applications
- Topic: What's on the Slab
- Replies: 8
- Views: 14760
Re: What's on the Slab
Thanks was just curious as I still did not have experimented a lot with light sensors... I might clone myself to find time to do everything I've in my mind!!!
- 17 Sep 2018, 08:39
- Forum: ESP Easy: Projects / Applications
- Topic: What's on the Slab
- Replies: 8
- Views: 14760
Re: What's on the Slab
Those look awesome!!
Well done Shardan!!!
PS: any reason why you put 2 luninosity sensors in your outdoor module?
Well done Shardan!!!
PS: any reason why you put 2 luninosity sensors in your outdoor module?
- 17 Sep 2018, 08:36
- Forum: Staff Announcements forum
- Topic: Giveaway! 20pcs of programmers
- Replies: 53
- Views: 153045
Re: Giveaway! 20pcs of programmers
Thanks a lot! really apreciated!!!
- 12 Sep 2018, 07:30
- Forum: Staff Announcements forum
- Topic: Giveaway! 20pcs of programmers
- Replies: 53
- Views: 153045
Re: Giveaway! 20pcs of programmers
I loved ESPEasy since 1st time I tried when I was looking and testing any ESP8266 firmware available! It's exactly what's needed for makes, it's not limites to simple home automation and it's amazing what you can achieve using its unique "rules" features :) Coming to me I am using it for s...
- 08 Sep 2018, 13:25
- Forum: ESP Easy: Software
- Topic: rules: delay
- Replies: 5
- Views: 16505
Re: rules: delay
I can guess the Delay suring system boot process is not working as it should...
Have you tried with a timer?
Have you tried with a timer?
- 25 Aug 2018, 12:36
- Forum: ESP Easy: Hardware
- Topic: reading multiple analog sensors
- Replies: 2
- Views: 8581
Re: reading multiple analog sensors
3rd solution is the easiest and safer IMHO!
- 24 Aug 2018, 20:01
- Forum: ESP Easy: Software
- Topic: How to disable rule at a specific time ?
- Replies: 28
- Views: 51683
Re: How to disable rule at a specific time ?
it works as far as the module does not reboot for any given reason on saturday between 16:00 and 23:00
- 24 Aug 2018, 08:46
- Forum: ESP Easy: Software
- Topic: How to disable rule at a specific time ?
- Replies: 28
- Views: 51683
Re: How to disable rule at a specific time ?
I think the rules are ok for simple timing setup, when it comes to more complex and/or weekly I prefer to move out from ESPeasy as it's not as flexible as needed and the rules can becaome way too complex and probably cosume lots of CPU. As well without nested IFs the overall setup of combined criter...
- 23 Aug 2018, 13:31
- Forum: ESP Easy: Software
- Topic: Relay recovery last state after power failure
- Replies: 3
- Views: 12206
Re: Relay recovery last state after power failure
you must use MQTT and use the message persistance features in order to do this (I have this feature in some of my modules even thou I don't use Domoticz) To clarify, papperone says you must activate the "MQTT retain" feature on the advanced tab. yes indeed, thanks for clarification, and a...
- 21 Aug 2018, 21:22
- Forum: ESP Easy: Software
- Topic: Relay recovery last state after power failure
- Replies: 3
- Views: 12206
Re: Relay recovery last state after power failure
you must use MQTT and use the message persistance features in order to do this (I have this feature in some of my modules even thou I don't use Domoticz)
- 14 Aug 2018, 18:46
- Forum: ESP Easy: Hardware
- Topic: Support for PZEM 004T Energy monitor
- Replies: 309
- Views: 13955004
Re: Support for PZEM 004T Energy monitor
I need to review this plugin in order to move it to the standard repository...
honestly still same issue, lack of time to improve it making it working with multiple devices (e.g. to monitor multiple lines or 3-phase AC).
honestly still same issue, lack of time to improve it making it working with multiple devices (e.g. to monitor multiple lines or 3-phase AC).
- 13 Aug 2018, 00:39
- Forum: ESP Easy: General Discussion
- Topic: Only first 4 light turn up
- Replies: 4
- Views: 12447
Re: Only first 4 light turn up
sorry but I cannot understand, the wiring is not clear and I see as well a Raspberry which no idea what's the purpouse of...
- 13 Aug 2018, 00:33
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
ok , understood!
I'll try to complete testing asap and make my PR
I'll try to complete testing asap and make my PR
- 12 Aug 2018, 12:58
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
@papperone, was it me that made changes? I don't remember changing things to your plugin. Maybe I can help explaining what has changed recently and to what purpose? no TD-er, it was an user I've never heard of "GHolli" in --> https://github.com/letscontrolit/ESPEasy/pull/1631 what shoudl ...
- 12 Aug 2018, 10:33
- Forum: ESP Easy: General Discussion
- Topic: Only first 4 light turn up
- Replies: 4
- Views: 12447
Re: Only first 4 light turn up
it's too vague the description to be able to help you, can you please post a picture on how you connected everything?
only guess is that you are powering the strip wrongly or the strip has harware issues...
only guess is that you are powering the strip wrongly or the strip has harware issues...
- 12 Aug 2018, 10:28
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
sorry about delays but while I was finishing the testing some other user commited in GitHub a change request of my plugin with huge nuber of changes aiming to optimization... long story short as I had already heavily changed the cosde to implement all new functions now I'm puzzled how to proceed :cr...
- 10 Aug 2018, 11:17
- Forum: ESP Easy: Hardware
- Topic: ESPEasy and NodeList
- Replies: 2
- Views: 7949
Re: ESPEasy and NodeList
What value you have in the "Unit Number"?
I jad same problem and then realized only units 1-32 are shown in the Node List
I jad same problem and then realized only units 1-32 are shown in the Node List
- 02 Aug 2018, 19:04
- Forum: ESP Easy: General Discussion
- Topic: Switch Button Long Push
- Replies: 15
- Views: 37911
Re: Switch Button Long Push
that's great news!!!grovkillen wrote: ↑02 Aug 2018, 12:09 I think we're on the same page here. Only a quick add to the discussion. The upcoming GPIO handler will make stuff like this possible.
- 02 Aug 2018, 11:37
- Forum: ESP Easy: General Discussion
- Topic: Switch Button Long Push
- Replies: 15
- Views: 37911
Re: Switch Button Long Push
You can then have a timer that would detect a hold that is less than one second since the timer would allow to be sub secund. well I don't htink this will fix the problem, let me explain: I woudl like a long push to be triggered after 2 seconds I would like any time below 2 seconds to be recognized...
- 01 Aug 2018, 23:26
- Forum: ESP Easy: General Discussion
- Topic: Switch Button Long Push
- Replies: 15
- Views: 37911
Re: Switch Button Long Push
Not sure I understood how this improvement should help to detect faster short/long push... Can you elaborate more?grovkillen wrote: ↑01 Aug 2018, 11:27 The new scheduler will make it possible to have a higher resolution than seconds. So the timer will be working with 100mSec steps.
- 01 Aug 2018, 10:28
- Forum: ESP Easy: Hardware
- Topic: Connecting a TM1637 4-Digit Display
- Replies: 217
- Views: 2329088
Re: Connecting a TM1637 4-Digit Display
Sorry I just come back and I thought I explained I had no time to submit the new plugin as I prefer to run some more tests before releasing it.
Still it won't be supporting multiple display (I have to check what changes are needed to handle this last feature...)
Still it won't be supporting multiple display (I have to check what changes are needed to handle this last feature...)
- 01 Aug 2018, 10:26
- Forum: ESP Easy: General Discussion
- Topic: Switch Button Long Push
- Replies: 15
- Views: 37911
Re: Switch Button Long Push
https://www.letscontrolit.com/wiki/index.php/Tutorial_Rules#One_button.2C_multiple_actions_using_long_press Honestly I don't like this workaround (it's not a real short/long push implementation) as 1 second can be too low and 2 seconds will make the normal behaviour odd (I push and release immediat...