Hi everyone, I tried getting a HC-SR501 to work on a regular esp8266 but nothing shows up in the logs, and if I refresh devices, the pin states stay the same. Connected both VCC to 5V and GND to my psu, and the output to GPIO0. If I check the pins with my multimeter it shows 5V on the VCC and 3.2V o...

Okay, so if I change the unit nr on the R145_RC6 build, devices drops off the wifi and won't reconnect. I've cleared the flash memory and re-flashed the same build only to have the same issue. Tried the R120 Stable, and that seems to work fine, but I want to use the retain option which isn't availab...

Retracing steps and rereading documentation, I found this: "Unit nr Each ESP Easy unit needs a unique number in the range 1-31. This is important for MQTT connections and the Node list! Do not forget to set this field to a non-zero value, not conflicting with other units." Mine were both s...

Hi, hope someone can help. I'm testing with two esp devices running ESPEasy. When both devices are powered on, switches don't work, but if I turn one of the two esp devices off, everything works fine. Did try this both ways around. Someone else mentioned that it could be to do with the clientid My m...