Hi, Did you succeed making the FUT092 working ? I could pair a remote into Domoticz, but everytime I push a button, it pushes the Domoticz device status into OFF. I checked the log file, and RFLink sees a "ON" action: 2018-01-17 15:07:14.126 (RFLink) Temp + Humidity (Oregon TempHygro) 2018...

Hi, Thanks a lot for all your comments. Indeed, I was not realizing that m converter could be so unefficient. To be honest, I followed a tutorial which was looking very easy and based on this converter which is not only managing the charge of battery to protect it, but also managing the discharge of...

Hi, Adding this resistor to measure the battery seems easy indeed, but if I understand properly, it means some current will permanently go through this resistor and thus discharge the battery. Am I correct ? Is there a way to use the wemos to act as a switch to only allow current in that resistor wh...

Hi, The weird thing is that RFlink reads the remote action: in Domoticz, the log displays for instance: 2016-11-23 19:56:03.895 (RFLink) Lighting Limitless/Applamp (MiLightv1) but though I pressed the On button, the log file shows either nothing or "Off" (and if I press Off, it also record...

Hi, Could anyone tell me if it's normal that Domoticz does not change status when on and off buttons of physical remote are pressed ? (I understood that this single color driver can not provide all features of other Milight devices, but is this feature unavailable as well ? despite Domoticz logs sho...

Hi, Thanks for this clarification. Is it normal however that Domoticz does not react when the buttons On, Off are pushed, or when up/down are pushed ? Shouldn't I see the switched being turned off if I push the OFF button ? And shouldn't the dimmer decreases (to whatever lower increment) if Domoticz...

Hi, Well, the FAQ doesn't say much about registering device with an existing physical remote and it states nothing abot "single color leds", but at least I could see that I had most likely to select the "Dimmer" type for the device. And the result is a switch with the RGB colorpa...

Hi, I face issues using RFLink to control a Milight WW/CW LD control with a white led strip. I saw that R43 is suppsoed to handle ww/CW bulbs, so I thought that led strips would also be handled. I posted details on another forum (https://www.domoticz.com/forum/viewtopic.php?f=49&t=14286) but I'm...