emoncms : Unknown sensortype or too many sensor values
This issue will be solved
https://github.com/letscontrolit/ESPEas ... 07.ino#L62
TD-er is aware and will fix it https://github.com/letscontrolit/ESPEasy/issues/3438
Search found 89 matches
- 23 Dec 2020, 23:27
- Forum: ESP Easy: Hardware
- Topic: SonOff POW R2 support
- Replies: 83
- Views: 95413
- 18 Mar 2020, 23:28
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
NIce, I have it working. Limited my string 12 chars, reduced baud from 115200 (which I think is to fast for softwareserial on an Arduino Nano with Atmega328) to 9600 baud. If I'm right, the potential of 9600 baud = 9600 bits per second = 960 bytes per second (1 start bit+8 bits+1 stop bit). Right? S...
- 18 Mar 2020, 00:14
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
Aha ok. I did compile myself using VS Code and used "custom_ESP32" But it should be working? Do you have an example screenshot of a working configuration? I wanted to use SoftSerial on an Arduino Uno/Nano/Mini at 115200 baud to Serial1 or 2 of the ESP32. Would this 8 to 9 Hz datarate work?...
- 17 Mar 2020, 23:48
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
I flashed an ESP32 with the latest firmware and saw that the Serial Proxy is included. What values do init 1 and init 2 expect? I have a sensor that's putting out a value 8-9 times a second on the serial using serial.print and serial.println How can I get these values to MQTT or another controller, ...
- 17 Feb 2020, 09:47
- Forum: ESP Easy: Software
- Topic: Geiger counter settings
- Replies: 22
- Views: 18533
Re: Geiger counter settings
Cool, consider uploading your data to Radmon https://radmon.org This is mine: https://radmon.org/radmon.php?function=showuserpage&user=fluppie007 http://www.radmon.org/radmon.php?function=submit&user=RADMONUSERNAME&password=RADMONPOSTPASSWD&value=CPMVALUE&unit=CPM You have to cha...
- 11 Feb 2020, 13:47
- Forum: ESP Easy: Hardware
- Topic: Senseair Sunrise S11 I2C communication
- Replies: 3
- Views: 12125
Re: Senseair Sunrise S11 I2C communication
13:46:31.041 -> 488 CO2 13:46:31.041 -> 19.15 C 13:46:36.063 -> 488 CO2 13:46:36.063 -> 19.15 C 13:46:41.061 -> 489 CO2 13:46:41.061 -> 19.16 C 13:46:46.055 -> 489 CO2 13:46:46.055 -> 19.16 C 13:46:51.065 -> 489 CO2 13:46:51.065 -> 19.16 C 13:46:56.084 -> 490 CO2 13:46:56.084 -> 19.16 C That sample ...
- 11 Feb 2020, 13:07
- Forum: ESP Easy: Hardware
- Topic: Senseair Sunrise S11 I2C communication
- Replies: 3
- Views: 12125
Senseair Sunrise S11 I2C communication
Hi all, I'm looking for a working I2C code example for the Sunrise S11 CO2 sensor from Senseair. I'm able to run an UART sample code, but I want to use I2C. Not working example (for me): #include <Wire.h> char FIND_ADDRESS = 'F'; char READ_CO2 = 'R'; byte address = 0x68; //byte address = 104; //slav...
- 23 Jan 2020, 10:40
- Forum: ESP Easy: Hardware
- Topic: Anyone has/know the D9-H sensor from Ali?
- Replies: 1
- Views: 8105
Anyone has/know the D9-H sensor from Ali?
https://nl.aliexpress.com/item/32890855720.html?spm=a2g0o.productlist.0.0.71f646b3z38by0&algo_pvid=637862c0-c96b-4f73-8a16-8cf78b492284&algo_expid=637862c0-c96b-4f73-8a16-8cf78b492284-0&btsid=0ecae2b1-1097-457b-b6f4-8c31d10211b8&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb2016...
- 06 Sep 2019, 20:48
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
ESP_Easy_mega-20190903_custom_ESP8266_4M1M
Should be this one then ?
Should be this one then ?
- 06 Sep 2019, 11:34
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
Any update on this? Is it included in the testing builds or do we need to uncomment something to use it?
- 07 Aug 2019, 14:28
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
Do I need to define/undefine something? Since it's not appearing in the normal, testing and dev build when self-compiling.
- 05 Aug 2019, 11:09
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
OK cool, I tried the custom and dev build. Or should I self-compile to get this one in?
- 03 Aug 2019, 10:57
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Re: Best plugin to start from for 2-way serial communication
Anyone who can tell me which serial plugin is using the best for send / receive within the plugin?
- 06 Jun 2019, 00:36
- Forum: ESP Easy: Software
- Topic: Best plugin to start from for 2-way serial communication
- Replies: 18
- Views: 24046
Best plugin to start from for 2-way serial communication
I want to develop a serial plugin for ESP Easy that sends and receives commands over software serial. Which plugin is the best to start from? Using 2-way communication, send and receive. For example the command to fetch the serial number of the connected device: byte stx[] = {0x02}; byte etx[] = {0x...
- 20 May 2019, 12:14
- Forum: ESP Easy: Software
- Topic: Help writing serial plugin
- Replies: 1
- Views: 3399
Re: Help writing serial plugin
Who would like to help on this? I got a little bit further in understanding the serial protocoll and decoding it with regular Arduino code on a ESP8266. Now I want to send/get results through an ESP Easy plugin. Who want's to offer help? If one of the main dev's want to help out I could donate to th...
- 17 May 2019, 22:10
- Forum: ESP Easy: Projects / Applications
- Topic: zigbee extender/repeater
- Replies: 3
- Views: 9296
Re: zigbee extender/repeater
I use this together with home-assistant: https://www.zigbee2mqtt.io Regarding ESP8266 as Zigbee Coordinator, maybe check this: https://www.zigbee2mqtt.io/how_tos/how_to_esp8266_with_cc2530.html Zigbee Routers: https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html Or plug and play: ht...
- 06 Feb 2019, 00:49
- Forum: uPyEasy: General Discussion
- Topic: AurAir Launched!!!
- Replies: 6
- Views: 18856
Re: AurAir Launch in ... 16 days
I just think the BME680 is a very good sensor. Had some issues with RH measurements of chinese/aliexpress (fake?) BME280 sensors. Then bought from Pimoroni some BME680 breakouts. The RH measurements are good, tested 3 of them in a glass with salt/water solution. They quickly ramp up close to 75% RH ...
- 02 Feb 2019, 12:29
- Forum: uPyEasy: General Discussion
- Topic: AurAir Launched!!!
- Replies: 6
- Views: 18856
Re: AurAir Launch in ... 13 days
Senseair sensor? Bosch BME680?
- 30 Jan 2019, 13:19
- Forum: uPyEasy: Software
- Topic: Convert regular Py script to MicroPython
- Replies: 2
- Views: 21332
Convert regular Py script to MicroPython
I'm completely new to Py/µPy, I only have some basic Arduino skills. I found a working Py 2.7 script that I can run off a Rpi. Only I want to run the script from a ESP device. Can we run the script also on µPy, or does it need to be rewritten? #!/usr/bin/python # coding=utf-8 # 22.12.2011 # Dieses P...
- 19 Jan 2019, 02:49
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 89719
Re: Sensair S8
Disabling the serial port didn't work for me either. Back on 18 12 2018.
You can follow my units here : https://emoncms.org/Edegem/bme680voc
P.S.: I have 22 Ohm resistors in series with RXD and TXD. I guess that's also fine?
You can follow my units here : https://emoncms.org/Edegem/bme680voc
P.S.: I have 22 Ohm resistors in series with RXD and TXD. I guess that's also fine?
- 19 Jan 2019, 02:31
- Forum: ESP Easy: Hardware
- Topic: Sensair S8
- Replies: 118
- Views: 89719
Re: Sensair S8
I have the same as you, with the newest builds. I reverted back to 18 12 2018. Build time:⋄ Dec 18 2018 03:12:49 Binary filename:⋄ ESP_Easy_mega-20181218_normal_ESP8266_4096.bin This is working for me. I haven't tried disabling the HW serial port when re-routing HW serial to D7 and D8. I'll reflash ...
- 17 Jan 2019, 13:36
- Forum: ESP Easy: Software
- Topic: HC-SR04 and the temperature
- Replies: 5
- Views: 6410
Re: HC-SR04 and the temperature
Check this: https://www.instructables.com/id/Improv ... -Accuracy/
I was wondering if you would get better results on a ESP32 as the timer is in µs instead of ms?
I was wondering if you would get better results on a ESP32 as the timer is in µs instead of ms?
- 16 Jan 2019, 08:32
- Forum: ESP Easy: Software
- Topic: Help writing serial plugin
- Replies: 1
- Views: 3399
Help writing serial plugin
I use Plugin 165 from the playground, SerSwitch as a base: void getmcustate() { // 0x02, 0x30, 0x32, 0x36, 0x32, 0x03 / STX 0262 ETX Serial.write(0x02); // Startbit Serial.write(0x30); // 0 Serial.write(0x32); // 2 Serial.write(0x36); // 6 Serial.write(0x32); // 2 Serial.write(0x03); // Stopbit Seri...
- 08 Oct 2018, 10:56
- Forum: ESP Easy: Software
- Topic: New MQTT lib in Tasmota, something for ESPEasy?
- Replies: 3
- Views: 3561
New MQTT lib in Tasmota, something for ESPEasy?
Tasmota is switching to a new MQTT lib:
6.2.1.13 20181008
* Change default Mqtt client library from PubSubClient to non-blocking ArduinoMqtt by Joel Gaehwiler
https://github.com/256dpi/arduino-mqtt
Could ESPEasy also benefit from this library?
6.2.1.13 20181008
* Change default Mqtt client library from PubSubClient to non-blocking ArduinoMqtt by Joel Gaehwiler
https://github.com/256dpi/arduino-mqtt
Could ESPEasy also benefit from this library?
- 17 Jun 2018, 23:38
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy v0.3.0 released
- Replies: 32
- Views: 66443
Re: uPyEasy v0.3.0 released
After some fiddling got it working :-). I have a rev0 module: ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) ets Jun 8 2016 00:22:57 rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,h...
- 15 Jun 2018, 12:31
- Forum: ESP Easy: Projects / Applications
- Topic: BME 680 sensor
- Replies: 55
- Views: 64121
Re: BME 680 sensor
Here you can see the logging of 3 pieces BME680, all within 5cmof eachother: https://emoncms.org/Edegem/bme680voc I'm using the one from Pimoroni: https://shop.pimoroni.com/products/bme680-breakout I'm not to convinced about the VOC accuracy, the trend is the same but I think the absolute value in k...
- 15 Jun 2018, 12:26
- Forum: ESP Easy: Projects / Applications
- Topic: espeasy heat meter (warmtemeter wärmemengenzähler)
- Replies: 3
- Views: 4519
Re: espeasy heat meter (warmtemeter wärmemengenzähler)
The guys from Open Energy Monitor did some research: https://heatpumpmonitor.org/
https://github.com/openenergymonitor/He ... r/Hardware
https://github.com/openenergymonitor/He ... r/Hardware
- 08 Jun 2018, 20:31
- Forum: Staff Announcements forum
- Topic: Senseair sensors
- Replies: 18
- Views: 26941
Re: Senseair sensors
Bought one . Nice that someone from Senseair is on this forums
- 12 Mar 2018, 20:49
- Forum: ESP Easy: Hardware
- Topic: ESPEasy & BME680
- Replies: 9
- Views: 15764
Re: ESPEasy & BME680
I was able to compile the mega version from Github with the BME680 plugin from the plugin playground on a Wemos D1 Mini and the BME680 Pimoroni break-out. Logging to emoncms via MQTT: https://emoncms.org/Edegem/bme680voc I had to hardcode the I2C address (0x76 in the Pimoroni break-out case) in the ...
- 11 Sep 2016, 23:19
- Forum: ESP Easy: Hardware
- Topic: AMS iAQ Core support? VOC/CO2
- Replies: 4
- Views: 6085
- 04 Sep 2016, 15:36
- Forum: ESP Easy: General Discussion
- Topic: Feature Request collection/list
- Replies: 197
- Views: 185104
Re: Feature Request collection/list
A PID Device. Device needs 6 parameters P, I, D, setpoint, Device(actual value) and GPIO for output. A checkbox to determine if it is for heating or cooling would also be nice. I am aware of the limited power of the processor, but for many purposes a cycle time of 5-10 seconds would be sufficient. ...
- 04 Aug 2016, 21:03
- Forum: ESP Easy: Software
- Topic: Many MQTT reconnects in 113
- Replies: 3
- Views: 4366
Re: Many MQTT reconnects in 113
Any idea why it's limited to 31 nodes?
- 03 Aug 2016, 12:20
- Forum: ESP Easy: Projects / Applications
- Topic: MH-Z14 / MH-Z19 CO2 sensor
- Replies: 55
- Views: 79983
Re: MH-Z14 / MH-Z19 CO2 sensor
Cool! I'm keen to build a device to monitor CO2 around the house . I'm following this topic!
- 02 Aug 2016, 12:36
- Forum: ESP Easy: General Discussion
- Topic: DHT22 readings not smooth
- Replies: 9
- Views: 12683
Re: DHT22 readings not smooth
I have something weird. With the ESP8266 my DHT22 Humidity readings are 15-20% off...
See: http://www.emoncms.org/Edegem/dht22comp
Any idea why the open energy monitor ones give another result? They're using the same DHT library...
See: http://www.emoncms.org/Edegem/dht22comp
Any idea why the open energy monitor ones give another result? They're using the same DHT library...
- 11 May 2016, 10:11
- Forum: ESP Easy: General Discussion
- Topic: Domoticz, Openhab or ...
- Replies: 13
- Views: 26423
Re: Domoticz, Openhab or ...
https://home-assistant.io
https://blog.openenergymonitor.org/2016 ... Assistant/
Haven't tried it yet, but I hear it's cool!
https://blog.openenergymonitor.org/2016 ... Assistant/
Haven't tried it yet, but I hear it's cool!
- 27 Apr 2016, 09:10
- Forum: ESP Easy: General Discussion
- Topic: MQTT to Relay with Node-Red
- Replies: 38
- Views: 45966
Re: MQTT to Relay with Node-Red
https://openenergymonitor.org/emon/node/12437 check this RaspberryPi image, emonCMS, Jessie Lite, Node-Red & openHAB. It's booting pretty quick.
- 19 Apr 2016, 15:23
- Forum: ESP Easy: General Discussion
- Topic: Feature Request collection/list
- Replies: 197
- Views: 185104
Re: Feature Request collection/list
https://openenergymonitor.org/emon/node/12437 use this RasPi image to have Node-Red, Openhab and emonCMS running in no-time .
- 18 Apr 2016, 09:41
- Forum: ESP Easy: Hardware
- Topic: AMS iAQ Core support? VOC/CO2
- Replies: 4
- Views: 6085
Re: AMS iAQ Core support? VOC/CO2
I also find this one: MICS-VZ-89F http://www.sgxsensortech.com/content/uploads/2015/01/Datasheet-MiCS-VZ-86-and-VZ-89-rev-6.pdf https://sgx.cdistore.com/ProductDetail/MICSVZ89T-SGX-Sensortech-Limited/553643/#.VxSLkaiLShc https://github.com/radhoo/mics_vz_89t http://www.pocketmagic.net/mics-vz-89-air...
- 17 Apr 2016, 21:45
- Forum: ESP Easy: General Discussion
- Topic: UV
- Replies: 4
- Views: 5715
- 15 Apr 2016, 15:40
- Forum: ESP Easy: Hardware
- Topic: AMS iAQ Core support? VOC/CO2
- Replies: 4
- Views: 6085
Re: AMS iAQ Core support? VOC/CO2
Then the SenseAir S8 could be an option (75 euros) http://www.senseair.com/products/oem-modules/senseair-s8/ http://www.sensor-test.de/ausstellerbereich/upload/mnpdf/de/SenseAir_S8_DriesenKernGmBH_13.pdf https://www.m.nu/co2matare-fran-senseair-p-1440.html webshop in Sweden Or we wait till Q1 2017 f...
- 15 Apr 2016, 15:37
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy, Switch, Relay and OpenHAB????
- Replies: 3
- Views: 7668
Re: ESPEasy, Switch, Relay and OpenHAB????
Check the project section. Example wall switch/relay http://www.esp8266.nu/forum/viewtopic.php?f=2&t=36
- 13 Apr 2016, 16:40
- Forum: ESP Easy: Hardware
- Topic: AMS iAQ Core support? VOC/CO2
- Replies: 4
- Views: 6085
- 03 Apr 2016, 15:45
- Forum: ESP Easy: General Discussion
- Topic: OLED Scrolling Display
- Replies: 122
- Views: 168377
Re: OLED Scrolling Display
I have it working . Now I'm looking for a way to use a existing input (pir sensor) as display button. So when someone walks by, the OLED turns on.
- 02 Apr 2016, 15:32
- Forum: ESP Easy: General Discussion
- Topic: OLED Scrolling Display
- Replies: 122
- Views: 168377
Re: OLED Scrolling Display
Def. going to look into this. A web configurable MQTT display is so cool . Great work!
- 02 Apr 2016, 15:28
- Forum: ESP Easy: General Discussion
- Topic: MQTT Import
- Replies: 50
- Views: 70626
Re: MQTT Import
I have this plugin working . Tonight or tomorrow I'll check out the larger font / scrolling pages version
- 01 Apr 2016, 22:19
- Forum: ESP Easy: General Discussion
- Topic: MQTT Import
- Replies: 50
- Views: 70626
Re: MQTT Import
Very cool, now it's easy easy to build a "MQTT display" regardless the source 8-) 8-) 8-) Arduino: 1.6.8 (Windows 8.1), Board:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Serial, 115200, 4M (3M SPIFFS)" C:\Users\Philippe\Documents\Arduino\ESP Easy\ESPEasyR95_MQTTimport\_P210_MQTTImport...
- 01 Apr 2016, 13:08
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 657099
Re: New ESP gadget
I'm wondering why you configure an output as an input? Is there a specific reason to?
- 23 Mar 2016, 16:12
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 283863
- 23 Mar 2016, 09:03
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 283863
Re: ESP Easy Releases
Well ... did you? Try it, I mean. I posted this in the Sonoff hardware thread :) I used the new R91 release with rules to control the Sonoff relay with the button and get feedback from the led: on SW_1#Switch do if [SW_1#Switch]=0 gpio,12,0 gpio,13,1 else gpio,12,1 gpio,13,0 endif endon It's workin...
- 22 Mar 2016, 20:48
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 657099
Re: New ESP gadget
I used the new R91 release with rules to control the Sonoff relay with the button and get feedback from the led:
Code: Select all
on SW_1#Switch do
if [SW_1#Switch]=0
gpio,12,0
gpio,13,1
else
gpio,12,1
gpio,13,0
endif
endon