Inside this hole is some gearwheel with homogeneous shape is turning very fast when there is water flow. LJ12A3 wil work with plastic? I saw on pictures that another counters working with LJ12A# have some metal part (On top of this dial a half moon iron disc is attached) - I dont have such in mine m...

Hello!


I have new watermeter in my home:



Which sensor for pulsecounting should I use? its look like the tips are non metalic?

I tryied with TCR5000 on one of the gauge but it looks like it doesent grabs/see tip movement?

Thank you!

Its very usefull! and I think that shuld be in Wiki

Not every GPIO is a GPIO only. Some are used to switch the startup behavior to boot mode or starting from SD-card (Not used with ESPEasy atm). Obviously these pins must have a defined level at startup. Regards Shardan I Tryied with TX (GPIO 01), GPIO02, on GPIO 15 its waking up but swich is not wor...

Hello,

Im trying to use some gpio as swich by connecting a switch between ground and the GPIO pin. Its working but when the swich is setted on douring the esp restert - module is not waking up till i didnt disconnect the swich. What is wrong?

Its working now on another ESP, giving some numbers but the only problem left its to set it correctly in domoticz its giving only 30 - 40watts and no kWh counting.


Thank you!

OK i tryied with another esp and its working....

I have some numbers, but what should be the settings to send it to domoticz with correct readings of current W and total / day / month kWh?

if 6400pulses = 1kWh?

Hello, thank you for message.

It is counter with LED. on module PWR led is ON and second led is flashing acording to counters led.
I tryied also with gpio15 and all i got is 0 :/

I would like to use it with Domoticz, what setting should I Put?


Thank you and greetings.

Hello, I have this module:



And am trying to use it as pulse counter for my energy counter.
I connected it do GPIO0 bot its not counting at all.

I foundout that this module giving high level on standby and low on pulse. Its ok for Espeasy (R147)?

Hello! I'm looking for some solution with ESPEasy and Domoticz to count how many Coal was burned in my heating system. I know that one Shovel is 5Kg of Coel. So I wonder to mount some dorbeel swich and press it every time when I'm putting another showel of coel. Domoticz will count everything for me...

ON GPIO03 sometimes turning swich on after click in browser is taking about 10sec.

And if i turn off power douring the "Thinking about turn on/of" its dying :/

It was still not blue and red till i cleaned the flash and put firmware from begining. I will try now with GPIO3

Thenk you for your answer. Its aliexpress module. http://www.letscontrolit.com/forum/download/file.php?mode=view&id=842 First time when its happened ESP was blinking blue led like heatbeat. Now Its stedy sight from blue and red led. And now It hang not during swiching but after reboot. Before th...

Hello every one. Sorry for my english, and greetings from Poland ;) Im working on ESP-01 1024kB with build 120 of Easy ESP. Till i was working only with 2 ds18b20 everything was great. Now I add relay. And start using http://192.168.1.135/control?cmd=GPIO,02,1 For on and off. After I started using t...