Hi everyone,
i would like to switch off wifi during a dedicated period and switch on after to reconnect it. Is it possible by rules?
Thank you.

I will try with an antenna but i'm wondering why a ESP8266 with ESPeasy can't received information of another client.
Because using a other router as wifi expander is quite "big" only for this...

Notice i will try an ESP07 because the Wemos is less suitable for deep sleep usage.

Hi everyone,I'm not sure if i can do the following. I have a esp8266 with espeasy. I have another one far away from the router. Generally it has difficulties to connect to the router due to the distance. Is there any way to use the first ESPeasy as a gateway? For example, i would like to connect to ...

pinging host name is unknow.

For the recommandation of the DHCP list between 1 and 150, i is ok but if someone add the same ip of ESP, it could happen a network conflict and in this case none of the devices are reachable.

On my side i have an old router Cisco

My name is ESP and the unit number is 1 the version of ESP easy is dev12 (v2.0.0-dev12) When i type in firefox or internet explorer http://ESP_1 (or http://ESP-1) No configuration page is provided (in the case of firefox, it forward to http://www.esp_1.com/ (i guess it tries to adapt the request). I...

Hi everyone, i would like to know if it exists any way to reach a esp with espeasy software by http protocol with a hostname instead of ip. Currently i need to hit the following url http://someip/ to get the web configuration page. But i would like to try to reach http://hostname/ to avoid an issue ...

Hi everyone,
is there any command to know the submask and the DNS which are retreived by DHCP?
Thank you.

I think we can close...

Uptime: 4 days 23 hours 5 minutes

Perhaps add this issue in the wiki

I found a bad solder for one of the two temp sensor.
I correct it and now 3h without reboot, i wait tomorrow...

Update: 47h without reboot. Therefore this "coincidence" could be linked to this issue.

Ok, i will do this.
For the power supply it is a 2A from a samsung smartphone so i think it is good.

Oh!
I have reboot once hour or once 1à hours and you?
How can i diagnostic a faulty temperature sensor?

Hi everyone, i have this kind of ESP8266: http://www.cnx-software.com/wp-content/uploads/2015/04/NodeMCU_Development_Board.jpg and the last dev image of ESPEasy (v2.0.0-dev10). I read two ds18B20 and have one counter. Sometimes the esp reboot without i do anything while in the info tab, it is a manu...

Indeed, i found some information about rtc memory but to be honest i won't be able to program it.
How is it possible to ask this feature? Of course, it is dedicated for low power usage (to boot without wifi and check if the sleep is stillpending or not).

No it is not possible while i would like an automatic measurement once a day.

Maybe put this information in the wiki. Done. https://www.letscontrolit.com/wiki/index.php/SleepMode Perfect. But i thought to a low power timer device to wake up the pi each x seconds where x is > at the limit. Is anyone know that, could you give me a reference (it is for a battery powered project...

Ok, thank you.
Maybe put this information in the wiki.

Do you know a way to use external device to achieve that?

Hi everyone, i use ESP Easy but i have i issue with the deep sleep delay. If i use a deep sleep delay > 1 hour (i.e. 3600 s), the esp module reboot each hour. It works well for delay < 3600 s In my case i would like a reboot each 6 or twelve hours (depending the application). Anyone has the same iss...

Here is

Hi everyone. Did i make something wrong? In my esp i try to read distance with a hc-sr04 In the log the value is rounded with two decimal. But once this value is sent to domoticz, the value is rounded at the unit. I try to update manually the device in domoticz and the precision is one decimal. Why ...

i have a lot of visonic door sensor (MCT-320 not 302) in 868Mhz

No problem

Concerning the plate and the second wire connected to the ground what is the physical explanantion of the higher level of detection?

AddOn, i have this product: http://www.dx.com/p/rtl2832u-r820t-mini-dvb-t-dab-fm-usb-digital-tv-dongle-black-170541 I sniff the data at a frequency between 868.84 and 868.91 in function of the device, could be related? In another hand could i use the antenna of the dvb-t device tu use it with RFLink...

In fact i have this one:
https://www.nodo-shop.nl/en/antennes/16 ... 68mhz.html
It is for 868Mhz devices (and they don't sell any other antenna)

I don't understand where plug the first or the second wire? Have you got a picture?

Thank you for your help

Hi everyone, i have a lot of visonic door sensor (MCT- 320 not 302) in 868Mhz I have a RFLink mount by Nodo with an antenna from the nodo shop. Unfortunately, the range of detection of sensor is 7 m in open area with the RFLink software under windows. I suspect the antenna to be not so powerful. Ind...

Hi everyone, i try to use RFLINK under Rpi 2 without success First of all everything is ok under windows. I see a lot of messages. Under linux when i use this command I received this 20;00;Nodo RadioFrequencyLink - RFLink Gateway V1.1 - R46; and it is all. I read the use of Rpi with RFLink requires ...

Hi everyone,
before to buy a RFLink, i would like to be sure that my Visonic devices are compatible.

I have MCR-320 (door relai) not the 302! and a central station MCR-308.

Anyone could confirm these door relai work?

Up, is there any possibilities to develop my own plugins to send you after and complete RFLink. Indeed, i planed to buy different 433 sensors (not currenlty listed) and if there is a easy way to submit the signal corresponding to improve RFLink, it would be great. There is any possibilities to do th...

Ok, i think it works...
Thank you for correction.

Hi everyone. I try to do a search with these terms without success (becase i can't search time, out, domoticz, too general terms) I have domoticz in a Rpi. I use minicom to check the receive signal and i have the following when i press a button of my remote: 20;EB;NewKaku;ID=03d1f400;SWITCH=2;CMD=ON...

I previously did it but the results are different in function of time... Here is the results (4 tests) for the On button of the first plug (of the first remote): 20;05;DEBUG;Pulses=114;Pulses(uSec)=5460,30,2610,1500,330,60,30,360,30,360,330,60,30,360,30,360,30,360,30,360,330,60,330,60,330,60,300,60,...

Hi all, i have this kind of remote control switch (same sticker but i have the remote with only two plugs): https://fr.aliexpress.com/item/5-Wireless-Remote-Control-Switches-Mains-Socket-with-Remote-Control-Electrical-Plugs-Adaptors-Power-Outlets-EU/32738094392.html?ws_ab_test=searchweb0_0,searchweb...