I found this Ewelink compatible waterproof socket but could not find any documentation on the web
is there anyone who can confirm to me that this is another Sonoff product and that it is based on Esp8266?
Search found 17 matches
- 14 Dec 2017, 11:35
- Forum: ESP Easy: Hardware
- Topic: Another Sonoff product?
- Replies: 1
- Views: 2481
- 25 Nov 2017, 09:02
- Forum: ESP Easy: Hardware
- Topic: OLED-with-SSD1306, larger than 1"?
- Replies: 10
- Views: 10934
Re: OLED-with-SSD1306, larger than 1"?
Hi Has anyone tested this esp8266 with oled 1.3 screen with EspEasy? https://it.aliexpress.com/item/connector-Expansion-board-new-NODEMCU-wifi-NodeMCU-forArduino-ESP8266-12F-wemos-for-1-3-0-96/32806828313.html?spm=a2g0y.search0104.3.34.1KxaDF&ws_ab_test=searchweb0_0,searchweb201602_5_10152_10065...
- 04 Sep 2017, 22:15
- Forum: ESP Easy: Hardware
- Topic: ESP-WROOM-02 not supported properly
- Replies: 7
- Views: 11960
Re: ESP-WROOM-02 not supported properly
Thanks papperone for the suggestions. There is conflicting information on the manufacturer's website of the "Prodino Wifi" The board is advertised with 4Mbytes of flash memory but in their Arduino IDE configuration guide they use the following setting: Flash size: 2M (1M SPIFFS). https://w...
- 04 Sep 2017, 12:26
- Forum: ESP Easy: Hardware
- Topic: ESP-WROOM-02 not supported properly
- Replies: 7
- Views: 11960
Re: ESP-WROOM-02 not supported properly
Hi, I found this very interesting board for some home automation projects. Before buying it I would be sure if I can use it with EspEasy. PRODINO WIFI https://www.kmpelectronics.eu/en-us/products/prodinowifi-esp.aspx This card uses ESP-WROOM-02 from Espressif. Reading some blogs I found this cpu is ...
- 21 Jan 2017, 11:36
- Forum: ESP Easy: Hardware
- Topic: New relay boards on Aliexpresse :)
- Replies: 15
- Views: 14351
Re: New relay boards on Aliexpresse :)
I followed this tutorial to upload Espeasy firmware r120
http://linksprite.com/wiki/index.php5?t ... controller
http://linksprite.com/wiki/index.php5?t ... controller
- 16 Dec 2016, 22:16
- Forum: ESP Easy: Hardware
- Topic: Ebay Wifi Relay boards
- Replies: 55
- Views: 47008
Re: Ebay Wifi Relay boards
i flashed lInknode R4 (four relay) with last EspEasy with Arduino IDE.
it works without problems
it works without problems
- 02 Dec 2016, 14:05
- Forum: ESP Easy: Hardware
- Topic: New relay boards on Aliexpresse :)
- Replies: 15
- Views: 14351
Re: New relay boards on Aliexpresse :)
It works now!!
I used Arduino IDE instead flashtool.exe
I used Arduino IDE instead flashtool.exe
- 02 Dec 2016, 12:27
- Forum: ESP Easy: Hardware
- Topic: New relay boards on Aliexpresse :)
- Replies: 15
- Views: 14351
Re: New relay boards on Aliexpresse :)
this is what I got from the "Arduino IDE" Serial Monitor Exception (9): epc1=0x4024eb86 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000017 depc=0x00000000 ctx: sys sp: 3ffff7f0 end: 3fffffb0 offset: 01a0 >>>stack>>> 3ffff990: 4024eb2a 0000001d 00000001 3ffefeda 3ffff9a0: 00000138 00000000...
- 01 Dec 2016, 22:40
- Forum: ESP Easy: Hardware
- Topic: New relay boards on Aliexpresse :)
- Replies: 15
- Views: 14351
Re: New relay boards on Aliexpresse :)
Yes. I select "boot from flash" jumper like the picture attached
After boot the esp8266 led blinking and D2 and D3 LED will stay on.
Also i hear a click from a relay
After boot the esp8266 led blinking and D2 and D3 LED will stay on.
Also i hear a click from a relay
- 01 Dec 2016, 21:26
- Forum: ESP Easy: Hardware
- Topic: New relay boards on Aliexpresse :)
- Replies: 15
- Views: 14351
Re: New relay boards on Aliexpresse :)
I just get LinkNode R4 http://linksprite.com/wiki/index.php5?title=LinkNode_R4:_Arduino-compatible_WiFi_relay_controller I uploaded the firmware ESPEasy_R120_512.bin with esptool.exe and an FTDI programmer. The procedure ends successfully, but after boot Esp8266 does not create any access point. Do ...
- 24 Nov 2016, 15:48
- Forum: ESP Easy: Hardware
- Topic: New relay boards on Aliexpresse :)
- Replies: 15
- Views: 14351
Re: New relay boards on Aliexpresse :)
GPIO 0 is for flash ( on the board DIO0)
GPIO 1 is TXD0
GPIO 3 is RXD0
I dont find GPIO 2?
GPIO 1 is TXD0
GPIO 3 is RXD0
I dont find GPIO 2?
- 08 Nov 2016, 12:46
- Forum: RFLink: Hardware Related discussions
- Topic: Motion detectors suggestion with battery alive message
- Replies: 0
- Views: 2248
Motion detectors suggestion with battery alive message
I saw the list of motion detectors compatible with RFLink but do not know which one to buy. What do you recommend?
I would appreciate that the device periodically send the message that the battery is alive.
I tried the Marmitek MS90 and it seems to me valid.
There are cheaper alternatives?
Thank you
I would appreciate that the device periodically send the message that the battery is alive.
I tried the Marmitek MS90 and it seems to me valid.
There are cheaper alternatives?
Thank you
- 21 Oct 2016, 13:46
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement via HLW8012 (HLW 8012) IC?
- Replies: 146
- Views: 244443
Re: Support for "Sonoff Pow" (from ITead) with Power Consumption Measurement?
For this device some esp8266 experminental firmware is under test.
Look here:
https://github.com/arendst/Sonoff-MQTT-OTA-Arduino/wiki
Look here:
https://github.com/arendst/Sonoff-MQTT-OTA-Arduino/wiki
- 21 Sep 2016, 22:44
- Forum: ESP Easy: Hardware
- Topic: Support for "Sonoff TH 10A" and "Sonoff TH 16A" hardware from ITead?
- Replies: 7
- Views: 13312
Re: Support for "Sonoff TH 10A" and "Sonoff TH 16A" hardware from ITead?
I am interested in the new Dual Sonoff "https://www.itead.cc/sonoff-dual.html". Very similar to "Sonoff TH 10A/16A"
Does anyone here know if the ESP Easy firmware can be flashed?
Does anyone here know if the ESP Easy firmware can be flashed?
- 07 Jul 2016, 15:02
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 725077
Re: New ESP gadget
There is a new Itead device based on Esp8266.
https://www.itead.cc/smart-socket-eu.html
Hopefully we can update with Esp Easy.
https://www.itead.cc/smart-socket-eu.html
Hopefully we can update with Esp Easy.
- 06 Feb 2016, 20:56
- Forum: ESP Easy: Hardware
- Topic: Esp8266 8 channel relay board
- Replies: 2
- Views: 5026
Esp8266 8 channel relay board
I would buy this relay board with Esp8266.
It will be possible to replace the firmware with ESP Easy?
http://researchdesignlab.com/modules/wi ... p8266.html
It will be possible to replace the firmware with ESP Easy?
http://researchdesignlab.com/modules/wi ... p8266.html
- 11 Oct 2015, 17:39
- Forum: ESP Easy: Hardware
- Topic: Switch Example
- Replies: 0
- Views: 3039
Switch Example
Hi @ all, first thanks for great work !!! I am a software programmer but I'm a newbie in hardware. I tried to reproduce the example of the Switch using a NODEMCU v1.0 and espeasy r20. The settings are like this: http://www.esp8266.nu/index.php/File:EasyConfigSwitch.png The only difference I chose th...