+1 on that, got so used to the rules engines with all its limitations and features
Search found 469 matches
- 23 Oct 2017, 18:39
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 275892
- 23 Oct 2017, 18:35
- Forum: ESP Easy: Software
- Topic: Status of relay switch not maintained after ESP Restart
- Replies: 16
- Views: 14046
Re: Status of relay switch not maintained after ESP Restart
Guys, there is a really good hardware fix for that problem. Use I2C expander, they keep their gpio output states, even while the ESP is rebooting. Even if you can retain the value in flash, the GPIOs will still "click" through as the ESP boots (depending which ones), or at least go low dur...
- 23 Oct 2017, 18:30
- Forum: ESP Easy: Software
- Topic: IF statement on %eventvalue%
- Replies: 16
- Views: 13186
Re: IF statement on %eventvalue%
You still start by sending http command with event value: http://<your esp ip>/control?cmd=event,configFlowSenor=1 On the receiving ESP you create a Dummy device, lets say as device 1 in the device Tab. You name the value , for example memory On configFlowSensor do TaskValueSet 1,%eventvalue% if [Du...
- 23 Oct 2017, 18:23
- Forum: ESP Easy: Software
- Topic: IF statement on %eventvalue%
- Replies: 16
- Views: 13186
Re: IF statement on %eventvalue%
@grovkillen: You wrote "use the TaskValueSet via cmd". TaskValueSet is declared in the Wiki as rule command only, not for external usage! Aaah!! You're right. Sorry, wrote it on my phone and didn't think straight :oops: It is possible with TaskValueSet You sent event value and write it in...
- 22 Oct 2017, 22:03
- Forum: ESP Easy: Software
- Topic: Rule for every FULL hour
- Replies: 5
- Views: 3843
Re: Rule for every FULL hour
Great, thanks for updating the wiki
- 22 Oct 2017, 22:01
- Forum: ESP Easy: Projects / Applications
- Topic: GPIO Save Last Status to Boot State
- Replies: 2
- Views: 3200
Re: GPIO Save Last Status to Boot State
Or use i2c expander, they keep their state, even during esp reboot
- 22 Oct 2017, 18:49
- Forum: ESP Easy: Software
- Topic: How to show on oled display current gpio status(high or low) ?
- Replies: 2
- Views: 2498
Re: How to show on oled display current gpio status(high or low) ?
Hello, I am trying to show on oled display the status of an gpio output, and without success. Is that even possible in such simple way as described here: https://www.letscontrolit.com/wiki/index.php/OLEDDisplay ? Thank you. Respecfully, DV Have you created a switch input device? Please provide more...
- 22 Oct 2017, 15:25
- Forum: ESP Easy: Software
- Topic: Rule for every FULL hour
- Replies: 5
- Views: 3843
Re: Rule for every FULL hour
It's quite hidden in the wiki, I think you only get there by search
https://www.letscontrolit.com/wiki/inde ... _Reference
https://www.letscontrolit.com/wiki/inde ... _Reference
- 22 Oct 2017, 08:10
- Forum: ESP Easy: Software
- Topic: Rule for every FULL hour
- Replies: 5
- Views: 3843
Re: Rule for every FULL hour
Very easy yes, try
Code: Select all
On Clock#Time=All,**:00 do
gpio,14,0
endon
- 21 Oct 2017, 09:04
- Forum: uPyEasy: General Discussion
- Topic: uPyEasy
- Replies: 132
- Views: 275892
Re: uPyEasy
My wife and daughter will travel from begin Nov until mid dec... about time I order some esp32 hardware. So exciting, thanks to your hard work lisam
- 21 Oct 2017, 09:01
- Forum: ESP Easy: Software
- Topic: Resend value/state change when wifi returns
- Replies: 1
- Views: 1926
Re: Resend value/state change when wifi returns
I think change state is not possible, but there is the option to send boot state I switch device.
- 18 Oct 2017, 13:44
- Forum: ESP Easy: General Discussion
- Topic: web server,ping... stops responding
- Replies: 2
- Views: 2537
Re: web server,ping... stops responding
Try to use ping feature in domoticz(alive checker).it sends a ping every 30sec. I had the same problem and this solved it for me
- 18 Oct 2017, 12:25
- Forum: ESP Easy: Projects / Applications
- Topic: Esp8266 + relay + normal switch rules coding
- Replies: 2
- Views: 3339
Re: Esp8266 + relay + normal switch rules coding
If relay is connected to gpio12, shouldn't that also be 12 in rules?
- 16 Oct 2017, 19:31
- Forum: ESP Easy: Projects / Applications
- Topic: Frequency measurement with EasyESP
- Replies: 10
- Views: 12167
Re: Frequency measurement with EasyESP
A very very low cost soil moisture sensor with NE555 Timer IC and EasyESP It's very simple to get soil moisture dependent frequency by using some isolated wires, two resistors and a NE555 Timer IC (see Attachement-Picture). The great problem is, to measure this frequency with a NodeMCU or a simple ...
- 09 Oct 2017, 19:07
- Forum: ESP Easy: General Discussion
- Topic: Solar powering nodemcu
- Replies: 9
- Views: 9303
- 09 Oct 2017, 19:02
- Forum: ESP Easy: General Discussion
- Topic: Solar powering nodemcu
- Replies: 9
- Views: 9303
Re: Solar powering nodemcu
I don't want to discourage you in using esp easy, but nodemcu on battery/solar power will not make you very happy.
Esp 8266 is just a power-hungry chip.
Rather check mysensors for that application. There are custom builts that run for months on 2aaa batteries
Esp 8266 is just a power-hungry chip.
Rather check mysensors for that application. There are custom builts that run for months on 2aaa batteries
- 03 Oct 2017, 18:59
- Forum: ESP Easy: General Discussion
- Topic: ip of espeasy is lost and i can not send any command but a device is report rssi every 5 min!!!!
- Replies: 24
- Views: 19498
Re: disconnect wifi (strange problem)
Is it maybe just a weak wifi connection? I had that Problem and overcame it with using wemos _d1 pro mini with external antenna. It has the same pin layout as the normal mini, just also a pigtail connector for external antenna.
- 03 Oct 2017, 09:09
- Forum: ESP Easy: General Discussion
- Topic: Number of Devices / Tasks limited to 12 ?
- Replies: 36
- Views: 31655
Re: Number of Devices / Tasks limited to 12 ?
Hi Domosapiens, thanks a lot! I tried this, and finally it works. I had some issues regarding the Controller. It overwrites controller 1 and controller 3, finally with controller 2 it works. Could you please explain how you build the .bin file? I would like to change it with the source of dev 12 an...
- 02 Oct 2017, 15:05
- Forum: ESP Easy: Software
- Topic: Check Wifi Connection and set GPIO
- Replies: 6
- Views: 3576
Re: Check Wifi Connection and set GPIO
Hi, can I setup a rule with a paramater that check the wifi connection? So, that I can light up a LED if the connection to the network is fine and set the GPIO to low if the connection is to the WLAN is lost and the ESP entering the AP mode. Regards Martin Why dont you use The wifi gpio feature in ...
- 27 Sep 2017, 18:15
- Forum: ESP Easy: General Discussion
- Topic: Replace NeoPixel library with FastLED in ESPEasy
- Replies: 6
- Views: 7777
Re: Replace NeoPixel library with FastLED in ESPEasy
Sounds like a great idea
- 22 Sep 2017, 08:17
- Forum: ESP Easy: General Discussion
- Topic: ESPEasy v2.0.0-dev12 released
- Replies: 44
- Views: 57964
Re: ESPEasy v2.0.0-dev12 released
Thanks for all your hard work
- 21 Sep 2017, 21:41
- Forum: ESP Easy: Software
- Topic: GPIO pin status at rules engine
- Replies: 9
- Views: 19839
Re: GPIO pin status at rules engine
Hello, I'd like to do the same as hiihoo. My ESP Easy node is controlling 16 relays so, it is not desirable to have to define 16 switches devices only to know gpio state in a rule. Those relays are activated/deactivated by an openHab controller and in specific situations, I need to know gpio states...
- 21 Sep 2017, 10:11
- Forum: ESP Easy: General Discussion
- Topic: How to use the interruption on Rules ?
- Replies: 3
- Views: 3785
Re: How to use the interruption on Rules ?
not sure what is it exactly that you are trying to do.
interrupt : can be used in for example pulse device
delay: will delay in rules, similiar to arduino
exit event: use an empty event you refer to
interrupt : can be used in for example pulse device
delay: will delay in rules, similiar to arduino
exit event: use an empty event you refer to
- 19 Sep 2017, 17:53
- Forum: ESP Easy: Hardware
- Topic: Esp easy firmware with nrf24l01
- Replies: 1
- Views: 3038
Re: Esp easy firmware with nrf24l01
Hello, everyone I'm Nhan. I come from vietnam. I have a question is configured esp easy firmware with nrf24l01 Thank ;) Hi Nhan Welcome to ESP easy. ESPeasy does not provide for additional RF link, and frankly it doesn't make sense to do that. If you are interested in using them for example for a m...
- 19 Sep 2017, 08:29
- Forum: ESP Easy: Software
- Topic: Rules logic
- Replies: 13
- Views: 9011
Re: Rules logic
Oh yeah, now is missing do, but the problem is that this rules works TO GOOD. Rules is executed by similar codes not only THIS code. BTW. It is possible to use var in Rules? Ya but when dealing with unexpected behaviour, it is best t respect the syntax. "Do" for events, "[]" for...
- 18 Sep 2017, 21:27
- Forum: ESP Easy: Software
- Topic: Rules logic
- Replies: 13
- Views: 9011
Re: Rules logic
Arithmetic on the left side don't work. LOG: 66189409 : IR : Code 800f045c - Type: 2 - Bits: 36 66189423 : EVENT: IR#IR=2148467804 66189470 : ACT : pulse,5,1,100 66189571 : SW : GPIO 5 Pulsed for 100 mS Rules On IR#IR do if [IR#IR]=2148467803 do pulse,5,1,100 endif endon Any idea??? On IR#IR do if ...
- 15 Sep 2017, 16:23
- Forum: ESP Easy: Software
- Topic: [Feature Request] Support for mh-z16 CO2
- Replies: 4
- Views: 4394
Re: [Feature Request] Support for mh-z16 CO2
Hi.. I need the support for mh-z16 Co2 Here is the documentation.. It can operate in both UART or I2C mode, i think i wan't it in I2C mode.. (it's a tiny switch to switch between the modes on the MH-Z16 Module) http://sandboxelectronics.com/wp-content/uploads/2015/06/MH-Z16_CO2_datasheet_EN.pdf htt...
- 11 Sep 2017, 23:02
- Forum: ESP Easy: Software
- Topic: GPIO pin status at rules engine
- Replies: 9
- Views: 19839
Re: GPIO pin status at rules engine
I get your point, though can't help you with that
- 11 Sep 2017, 22:40
- Forum: Staff Announcements forum
- Topic: ESP Easy development status
- Replies: 143
- Views: 280698
Re: ESP Easy development status
Well then do something about it. I guess most devs have a real life to tend to/enjoy .... I spare the time I can to help on forum/wiki, as my coding sucks. I dont nearly put as much time into this project as many devs and I still find your statement a bit inappreciative.
- 10 Sep 2017, 22:26
- Forum: ESP Easy: Software
- Topic: EXTGPIO in rules
- Replies: 1
- Views: 2154
Re: EXTGPIO in rules
Works for me. Try leaving the space : extpio,5,1
- 10 Sep 2017, 21:11
- Forum: ESP Easy: Projects / Applications
- Topic: Sonoff slow to cold boot - 30 seconds til "boot state" set. No delay set.
- Replies: 4
- Views: 3949
- 10 Sep 2017, 21:09
- Forum: ESP Easy: Projects / Applications
- Topic: Sonoff slow to cold boot - 30 seconds til "boot state" set. No delay set.
- Replies: 4
- Views: 3949
Re: Sonoff slow to cold boot - 30 seconds til "boot state" set. No delay set.
No, I think it’s a matter of espeasy first looking for wifi before initializing gpio.
- 10 Sep 2017, 21:05
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 rules: %eventvalue%
- Replies: 2
- Views: 2698
Re: ESPEasy R120 rules: %eventvalue%
Also try : event,on=1023
On the local console in tools tab
On the local console in tools tab
- 10 Sep 2017, 21:01
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 rules: %eventvalue%
- Replies: 2
- Views: 2698
Re: ESPEasy R120 rules: %eventvalue%
Dear all, I've created a home made dimmer for my LED slabs using a ESP 8266 running ESPEasy, which triggers a MOSFET, that lets the 12V reach the LEDS. From my controller (Jeedom), I just have to send a PWM,0,1023 to fully light the slab, PWM,0,600 to light it mildly, and PWM,0,0 for turn it off. I...
- 10 Sep 2017, 20:54
- Forum: ESP Easy: Software
- Topic: GPIO pin status at rules engine
- Replies: 9
- Views: 19839
Re: GPIO pin status at rules engine
You can probably get the gpio state(use in if condition) , but this way you are not able to start an event, trigger something, you can just check from existing event
If you want more professional advice on Rules +gpio + boot state post your rules, devices and config tab.
If you want more professional advice on Rules +gpio + boot state post your rules, devices and config tab.
- 10 Sep 2017, 15:05
- Forum: ESP Easy: Software
- Topic: ESPEasy R120 Rules - [need help]
- Replies: 10
- Views: 8762
Re: ESPEasy R120 Rules - [need help]
Hello! I still have a question, maybe you know how to do it. In this case if I turn off the light from the button and then I want to start it from the openhab, it runs the rule where it counts the value of the dummy device and does not work. So I think a way is to set up the dummy device than to se...
- 10 Sep 2017, 15:03
- Forum: ESP Easy: Software
- Topic: Rules for PIR combination ??
- Replies: 5
- Views: 4560
Re: Rules for PIR combination ??
vincen wrote: ↑10 Sep 2017, 11:18Thanks that's what I wanted to dotoffel969 wrote: ↑10 Sep 2017, 10:52For andCode: Select all
On pir1#switch=1 do If [pir2#switch]=1 Do something Endif Endon
Be aware that "do something" will only happen when both pit are triggered at the same time
- 10 Sep 2017, 15:00
- Forum: ESP Easy: Software
- Topic: Rules for PIR combination ??
- Replies: 5
- Views: 4560
Re: Rules for PIR combination ??
Why don't you want to have both pir on your controller? You can just make them into 1 virtual pir in domoticz/openhab/ whatever
- 10 Sep 2017, 10:54
- Forum: ESP Easy: Software
- Topic: Rules for PIR combination ??
- Replies: 5
- Views: 4560
Re: Rules for PIR combination ??
Please look for the rules tutorial in the wiki, it will answer your questions. Why are you stingy with devices on your home automation?
- 10 Sep 2017, 10:52
- Forum: ESP Easy: Software
- Topic: Rules for PIR combination ??
- Replies: 5
- Views: 4560
Re: Rules for PIR combination ??
Hi I have wired two PIR sensor on my ESP to cover correctly a room with strange layout. I only want one signal to come back on MQTT to tell me if there is someone in the room or not. Instead of getting both PIR back to my automation system, I was thinking to use rules in ESP to combine both PIR suc...
- 07 Sep 2017, 21:25
- Forum: ESP Easy: Software
- Topic: Plug-in for MAX31865 RTD or MAX31856 Thermocouple IC?
- Replies: 29
- Views: 15800
- 07 Sep 2017, 21:23
- Forum: ESP Easy: General Discussion
- Topic: DOes a separate guest network make sense?
- Replies: 10
- Views: 8007
Re: DOes a separate guest network make sense?
It depends if you need to communicate with an ethernet device(like domoticz server), AFAIK on most routers ethernet devices are not available from guest wifi.
- 07 Sep 2017, 19:04
- Forum: ESP Easy: Software
- Topic: I2C multiple same sensors (SI7021)
- Replies: 4
- Views: 3957
- 04 Sep 2017, 21:15
- Forum: Experimental
- Topic: Counter is sending false values
- Replies: 2
- Views: 11962
Re: Counter is sending false values
Have a Wemos D1 mini input connected to district heating power meter's S0 output (with pull-up resistor). The counter is somtimes sending values to Domoticz even when no pulse was generated by meter. I did set up a switch input on the same gpio input that triggers a LED blink on pulse, so I can see...
- 30 Aug 2017, 22:31
- Forum: ESP Easy: General Discussion
- Topic: need help in rules
- Replies: 7
- Views: 6114
Re: need help in rules
Should also work like this
No if statement required, and find it good practice as additional nested if statement is possible
Code: Select all
on lock#Switch=0 do
NeoPixelAll,0,0,255
timerSet 1,30 // 30 sec timer
endon
on Rules#Timer=1 do
NeoPixelAll,0,0,0
endo
- 30 Aug 2017, 15:54
- Forum: ESP Easy: Hardware
- Topic: LCD with two alternating sets of display lines?
- Replies: 9
- Views: 6257
Re: LCD with two alternating sets of display lines?
One last question, is there a list of commands? In the ESPEasy command reference I find a link to the LCD Display page, and there I can see four: simple write, clear, on and off. Is there more? Such as line-clear, blink on/off, cursor position? Not that I'm aware of. What do you mean by dependant o...
- 30 Aug 2017, 08:21
- Forum: ESP Easy: Hardware
- Topic: LCD with two alternating sets of display lines?
- Replies: 9
- Views: 6257
Re: LCD with two alternating sets of display lines?
Yes it's possible. The commands shown under http control are also available in rules:
https://www.letscontrolit.com/wiki/index.php/LCDDisplay
Just use the lcd command in rules in combination with 2 timers.
https://www.letscontrolit.com/wiki/index.php/LCDDisplay
Just use the lcd command in rules in combination with 2 timers.
- 30 Aug 2017, 08:02
- Forum: ESP Easy: Hardware
- Topic: LCD with two alternating sets of display lines?
- Replies: 9
- Views: 6257
Re: LCD with two alternating sets of display lines?
I am using an LCD screen with four display lines, and have run out of room. It would be nice to have two separate sets of lines, which display alternating. So first display the 1st set of lines, then after (say) 30 seconds display the second, etcetera. I don't think this is a function at this momen...
- 25 Aug 2017, 07:40
- Forum: Staff Announcements forum
- Topic: ESP Easy development status
- Replies: 143
- Views: 280698
Re: ESP Easy development status
Have you seen this one ? https://pycom.io/product/lopy/
Could it be an option?
Could it be an option?
- 25 Aug 2017, 07:28
- Forum: ESP Easy: Hardware
- Topic: More support for i2c modules/sensors [UPDATED 25.09.2016]
- Replies: 14
- Views: 16136
Re: More support for i2c modules/sensors [UPDATED 25.09.2016]
Chill people I am sure you both contribute to best you can. It's not a competition... not everyone has same abilities/time to spare/energy, everyone to their abilities.