I recently got a few ESP32 modules to replace several ESP8266, but I can't upgrade it. I flashed the available bin (R20100) from https://www.letscontrolit.com/wiki/index.php/ESPEasy32 , but when I flash newer binaries (ESP_Easy_mega-2019XXXX_esp32test_1M8_partition), the device bricks and wont boot....

I've used the settings you recommend for "Momentary". Situation is that relay changing 0/1 based on "Momentary" in espeasy, but not reflecting status in domoticz. Really appreciate your help and If possible to make sharing screen session, then I will let you know when available....

Thanks, I´ve tried following but without success. If understand correctly then send to http should switch relay domoticz switch on/off according to momentary button. on Momentary#Switch do sendtohttp,192.168.0.106,8080,/json.htm? param=switchlight&type=command&idx=8&switchcmd=Toggle end...

I can't send a picture now, but the settings for the device "momentary" should be: Send boot state = no Send data = no Idx = any number (You won't create a virtual switch associated to the push buttom. You just create a switch for the light/relay. Since it wont send data to any domoticz vi...

on cozinha_btn_luz#Switch do sendtohttp,192.168.25.150,8888,/json.htm?param=switchlight&type=command&idx=76&switchcmd=Toggle endon This is my rule, exactly as it is in espeasy, and it works perfectly. (Cozinha=kitchen and Luz=light) You dont need if/else/endif or any other statements. Ju...

Remove events lamp on and lamp off...

You are sending 2 commands to that same device...
Remove de if/endif session and leave only the sendtohttp.

vojtishek wrote: ↑07 May 2017, 22:03 Hi guys,
could you please advise If I can use that in situation related to my post below
https://www.letscontrolit.com/forum/vie ... 687#p15687

I'm newbie in using scripts so any help more than appreciated.

Thanks
V.

Ok, replied there.

just use Sendtohttp with Toggle option... so, it wont care about the switch real status. It will only change it to oposite state. If it's on, then it will turn it off. If it's off, it will turn it on. Simple and efficient. I'm using this settup for a time. I can turn on the living room light from a ...

data wrote:Here's an image I am using on a 4M Wemos mini D1 with Kaku and some other 433MHz related plugins. The analog input configured to measure supply voltage.

download at http://tinydevices.de/esp-easy-firmware/

Thank you.

Can't compile... Always getting errors...

Does anybody could upload the compiled image and share the download link?
I'm using 4M ESP modules.

Thanks.

I tried something, and it worked fine. Just invert the commands, and put "param" as the first item, without the "&". Normal way ("&param" gets replaced): /json.htm?type=command&param=switchlight&idx=174&switchcmd=On Inverted way (working fine): /json...

I updated to 147, and still have the same problem (&param gets replaced by a symbol) and the command doesnt work.

I am pretty sure, you haven't downloaded the source code for this plugin but instead a website. Yeah, I noticed that right after I posted the question... but, downloading the raw code or even downloading the entire zip didn't work. I tried about 5 plugins, and all (except one) returns different err...

I downloaded R148, put the plugin together with other INO files, copied libraries and tryed to compile, but it returned several errors... I wont paste all LOG, because it's too long: _P199_RF443_KaKu:22: error: stray '\302' in program <title>ESPEasyPluginPlayground/_P199_RF443_KaKu.ino at master · ...

No solution yet for the "&param" replacement problem?
And the Publish domoticz/in doesn't work for me either. I'd like to use mqtt to update a contact switch (it's a read only switch, used for reed sensors, and only updates with the "udevice" command on json/domoticz)

Does it work with those cheap chinese 433 TX from aliexpress?

I had a PIR connected to GPIO0, but the behavior was erratic, full of false positives... Since Domoticz had an event to turn on a light, associated with 2 other devices (a door contact and a LDR input), you can imagine the result at night, when the lux was low... The light was going nuts, blinking h...

I just had an idea, and it worked for me... maybe it's not the best solution, but it's simple and works fine. ======================== on kitchen_btn#Switch do if [kitchen_light#Switch]=0 gpio,14,0 else gpio,14,1 endif endon ======================== It's a very basic toggle event... Before this, I t...

I spent hours trying, but no matter what I change, I'm always stuck with the problem of having to press the button twice, when triggerd by domoticz. Here is my setup at this time: << DOMOTICZ: >> kitchen dummy switch, IDX 76 actions: On: http://192.168.25.156/control?cmd=event,kitchenon Off: http://...