I have a new 2 button 433mhz remote, with "On" and "Off", of course, both buttons are seen as ON commands. 20;DE;EV1527;ID=080d40;SWITCH=04;CMD=ON; and 20;30;EV1527;ID=080d40;SWITCH=08;CMD=ON; I wish to save them as a custom RF record, following the http://www.rflink.nl/blog2/faq...

Hi @Stuntteam,

I have the same issue, so am hoping the next version of the RFLink firmware will have this higher resolution

Hey Guys, That's great, thank you for adding the extra detail. I will give it a go with the added instructions. I also have another CC2500 to try. I will give it a go with the latest rfl4607_tst.zip (REV=46, BUILD=07) or is Build 06 the best to test? Also, I see Rev 46 is not officially on the web p...

It sounds like you just want this: "Ansluta-Remote-Controller" from https://github.com/NDBCK/Ansluta-Remote-Controller

Justblair wrote:I have the cc2500 wired through a two way level converter

Can you please let me know what type of level converter you used and confirm your wiring. A photo would be great too.

Many thanks,
Richard

Hi Stuntteam, Any ideas on my full post above about the locking up of the firmware, seems a bit strange? It's also odd that the TXB0108 is not working for you, it is working for me with other arduino software, just not with the RFLink firmware. I have also tried BSS138 Bi-directional level converter...

ayasystems wrote:Another bug

When you press Ansluta button in RFLinkLoader v1.09 program the command sent to Rflink is:

10;setBLE=off;

I think you mean in RFLink Loader V1.09, when you press the "Ansluta: OFF" button, the "10;setBLE=off;" command is sent, this is incorrect.

Strangely I'm experiencing the same issue: viewtopic.php?f=11&t=2586&p=12773&hilit ... %3B#p12773

I found if you send "10;setAnsluta=on;" with no CC2500 attached you get one response (see below) but then nothing, even when restarting the board. I get the same "bug" when the CC2500 is connected. I believe the wiring is correct and the CC2500 is good. I have tried wiring with 1...