Search found 9 matches

by Dr_Genestealer
18 Feb 2018, 03:09
Forum: RFlink: General Discussions
Topic: Case change in RF Signal Learning
Replies: 0
Views: 2529

Case change in RF Signal Learning

I have a new 2 button 433mhz remote, with "On" and "Off", of course, both buttons are seen as ON commands. 20;DE;EV1527;ID=080d40;SWITCH=04;CMD=ON; and 20;30;EV1527;ID=080d40;SWITCH=08;CMD=ON; I wish to save them as a custom RF record, following the http://www.rflink.nl/blog2/faq...
by Dr_Genestealer
24 Jun 2017, 20:00
Forum: RFlink: General Discussions
Topic: R46 - OWL CM113 readout resolution
Replies: 6
Views: 10754

Re: R46 - OWL CM113 readout resolution

Hi @Stuntteam,

I have the same issue, so am hoping the next version of the RFLink firmware will have this higher resolution :)
by Dr_Genestealer
22 Feb 2017, 16:25
Forum: RFlink: General Discussions
Topic: Ansluta ERROR
Replies: 15
Views: 15605

Re: Ansluta ERROR

Hey Guys, That's great, thank you for adding the extra detail. I will give it a go with the added instructions. I also have another CC2500 to try. I will give it a go with the latest rfl4607_tst.zip (REV=46, BUILD=07) or is Build 06 the best to test? Also, I see Rev 46 is not officially on the web p...
by Dr_Genestealer
04 Feb 2017, 02:36
Forum: RFlink: General Discussions
Topic: Source Code?
Replies: 20
Views: 23235

Re: Source Code?

It sounds like you just want this: "Ansluta-Remote-Controller" from https://github.com/NDBCK/Ansluta-Remote-Controller :D
by Dr_Genestealer
04 Feb 2017, 02:26
Forum: RFLink: Hardware Related discussions
Topic: Ansluta - I can recieve but not send
Replies: 6
Views: 6336

Re: Ansluta - I can recieve but not send

Justblair wrote:I have the cc2500 wired through a two way level converter
Can you please let me know what type of level converter you used and confirm your wiring. A photo would be great too.

Many thanks,
Richard
by Dr_Genestealer
04 Feb 2017, 02:08
Forum: RFlink: General Discussions
Topic: Ansluta ERROR
Replies: 15
Views: 15605

Re: Ansluta ERROR

Hi Stuntteam, Any ideas on my full post above about the locking up of the firmware, seems a bit strange? It's also odd that the TXB0108 is not working for you, it is working for me with other arduino software, just not with the RFLink firmware. I have also tried BSS138 Bi-directional level converter...
by Dr_Genestealer
27 Jan 2017, 22:45
Forum: RFlink: General Discussions
Topic: Ansluta ERROR
Replies: 15
Views: 15605

Re: Ansluta ERROR

ayasystems wrote:Another bug

When you press Ansluta button in RFLinkLoader v1.09 program the command sent to Rflink is:

10;setBLE=off;
I think you mean in RFLink Loader V1.09, when you press the "Ansluta: OFF" button, the "10;setBLE=off;" command is sent, this is incorrect.
by Dr_Genestealer
27 Jan 2017, 22:34
Forum: RFlink: General Discussions
Topic: Ansluta ERROR
Replies: 15
Views: 15605

Re: Ansluta ERROR

I found if you send "10;setAnsluta=on;" with no CC2500 attached you get one response (see below) but then nothing, even when restarting the board. I get the same "bug" when the CC2500 is connected. I believe the wiring is correct and the CC2500 is good. I have tried wiring with 1...