Yes, I am using J-Y(St)Y 10x2x0,6

with an raspberry pi attached the sensors are working fine.

Hi, cable around 3 m with 2 connectors. Never had the problem that one sensor doesn't show his id in espeasy.When editing the sensor and just press save a value is transmitted, but not based on the timing which is entered.

Soory,
mega-20190925 and mega-20191208 tested.

ciao Daniel

Good morning, one of my ESPeasys has a strage behaviour. It should send data to a fhem system. After a while the sensor stop sending date. Rebooting helps sometimes, sometimes just edit the sensor . All of the times, the webside of the esp shows sensefull data. In the log (Debug dev 9) no sensor req...

Good afternoon,
i have the following effect:
3 esp8266
one running FW 147
2 running mega-20180804
1 running mega-20180808

all with UDP Port 65500 activated.
Every device ony have the 147 node in the node list. All others are not on the node list.
any suggetsons?

good afternoon,
I try to connect a warema sender with 8 channels. Under device it shows:
rflinki 00006CA7 0 oben 6 Light/Switch Warema Open
but it seems that all 8 channels have the same entry. Any hints?

thanks in advance Daniel