I got it to work! I had to hold the button down then disconnect the USB cable while FTDI was connected to the Sonoff. Count to three. Then while holding the button down (for the entire flash process) plug in USB. Hit enter on the flash.com, and waited. After "Hit any key" I released the bu...

This is my screen dump when I run flash.cmd. Comport (example 3, 4, ..) :3 Flash Size (example 512, 1024, 4096) :1024 Build (example 71, 72, ..) :120 Using com port: 3 Using bin file: ESPEasy_R120_1024.bin esptool v0.4.6 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de> setting board to nodemcu setting...

the only thing I get from serial monitor is right after the flash. This is what I get: c_'Ï

I'm new to programming, but have skills in hardware. Trying to configure my first smart home setup.

I am having a problem where the flash indicates correctly, but will not reboot to indicate Wi-Fi SSID esp_0.
I have flashed with ESPeasy Flash.cmd. I was able to use arduino ide to write a blink code that would work.
am I missing something?