Search found 21 matches
- 08 Oct 2017, 22:56
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Ok now we have the state but only when the commands go through the ESP. If you use the physical buttons it does not update... Any ideas for that Hi Hemelic, You will have to explain your setup. If you press the physical button, does it change the state in domoticz? If it does, it will send the stat...
- 08 Oct 2017, 14:01
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Here is the untested version with states as shown in previous post:
- 06 Oct 2017, 22:54
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
The switch state is saved in a local variable, but not yet publicly available.
state = 0, both switches are off
state = 1, switch 1 = on, switch 2 = off
state = 2, switch 1 = off, switch 2 = on
state = 3, switch 1 = on, switch 2 = on
Is it usable when this is publicly available?
state = 0, both switches are off
state = 1, switch 1 = on, switch 2 = off
state = 2, switch 1 = off, switch 2 = on
state = 3, switch 1 = on, switch 2 = on
Is it usable when this is publicly available?
- 26 Sep 2017, 23:16
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Please read this topic before asking.
- 19 Aug 2017, 22:37
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
hello Bryan, since i disabled the serial port it seems to work when i call the event drectly. But i could not get an event when i just switch Sonoff1 on. Maybe i ther is a fault in my rules: what would be the syntax for an event when Sonoff1 goes on and what do i have to do in the devices. it seams...
- 15 Aug 2017, 14:46
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
The switchstate is what is send out on the serial to the pic. Switchstate 0 = switch 1 is off, switch 2 is off Switchstate 1 = switch 1 is on , switch 2 is off Switchstate 2 = switch 1 is off, switch 2 is on Switchstate 3 = switch 1 is on, switch 2 is on Did you disable serial in the advanced settin...
- 15 Aug 2017, 11:52
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
hello Bryan, it seems to me that something with the scribt goes wrong. i have made this rules: On Sonoff1On do Sonoff1,1 timerSet,1,5 endon On Sonoff1Off do Sonoff1,0 timerSet,1,0 endon On Rules#Timer=1 do //When Timer1 expires, do Sonoff1,0 endon i can switch the relay on with caling sonoff1On and...
- 12 Aug 2017, 17:21
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Hey Bryan, just tried it but sitting remote, so cannot see the result. From the log file this does seem to work. Just another stupid Q: which GPIO's are the additional button 1 and button 2? Kind regards Steve Hi Steve, The buttons are not connected to the GPIO's from the esp. Regards, Bryan
- 12 Aug 2017, 01:12
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
hi Brian, thanks for your work! The On/Off commands work fine, but what do i have to do when i want to use the 'LongPulse' command? I have no experience in EasyEsp and Arduino so is it possible to add a timer in your plugin? regards jomixl Hi Jomixl, You can use rules to start a timer. Check the ru...
- 07 Aug 2017, 18:48
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Hi LisaM, I am already using global sync, but all my sensors and controllers are not DHCP and sit in a different IP range. I can set a static IP on the other Espeasy's so was wondering if this is due to this? Anyone who can tell me how to use the sonoff1 / sonoff2 in rules? Kind regards Steve Hi St...
- 20 Jul 2017, 21:45
- Forum: ESP Easy: General Discussion
- Topic: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
- Replies: 10
- Views: 9443
Re: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
You can see the difference in behaviour best when you send the commands directly from a webbrowser to domoticz: http://192.168.1.208:8080/json.htm?type=command¶m=switchlight&idx=93&switchcmd=On updates domoticz and turns on switch http://192.168.1.208:8080/json.htm?type=command&p...
- 18 Jul 2017, 22:18
- Forum: ESP Easy: General Discussion
- Topic: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
- Replies: 10
- Views: 9443
Re: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
Good to hear that it is working. Maybe it will also be solved for you when you turn on send boot state for the relay? The rules I've posted came from a sonoff touch, but I thought it should be the same, also (touch) button and relay. Other thoughts: when you send to controller on both devices, you w...
- 18 Jul 2017, 15:22
- Forum: ESP Easy: General Discussion
- Topic: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
- Replies: 10
- Views: 9443
Re: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
In order to prevend a feedback loop, it would be better to send the update to domoticz using rules. You never know what value to use to set the delay. But if you still want to use the send to controller option with a delay, you might want to turn off the send to controller for the button. You only n...
- 18 Jul 2017, 10:55
- Forum: ESP Easy: General Discussion
- Topic: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
- Replies: 10
- Views: 9443
Re: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
For me it worked by turning off the send to controller option on both devices and use rules instead. The rules I've used: On System#Boot do timerSet,1,5 endon On Rules#Timer=1 do SendToHTTP 192.168.0.xx,8080,/json.htm?type=command&parm=udevice&idx=xxx&nvalue=0 endon on switch1#Switch do ...
- 08 Jul 2017, 13:09
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Hi cosmic gate, I've made some changes to the code, so it will send the state to the controller. I haven't been able to test it, as my sonoff duals are all in use. There are also a few side effects which I can't eliminate at the moment. The attached binary doesn't have these side effects (see below)...
- 29 Jun 2017, 19:03
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Hi enebcs, All my sonoff duals are in use, but I see on the output off your serial plugin on an esp that it will not work with the sonoff dual. When sending the on command to relay 1, I don't see anything on the serial. I've also use 2 dummy switches on the domoticz side and only use the URL actions...
- 26 Jun 2017, 10:27
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
Hi, Here is the plugin code I used for the Sonoff dual. Had no time to learn/use github. Plugin number is also probably already used. Save the code as .ino file and compile esp easy using the guide. The command Sonoff1 is for the first switch, Sonoff2 for the second. EG. http://192.168.0.50/control?...
- 19 Jun 2017, 21:45
- Forum: ESP Easy: General Discussion
- Topic: sonoff dual flashing the ESP
- Replies: 68
- Views: 91976
Re: sonoff dual flashing the ESP
I've created a plugin to switch the Sonoff Dual and that part is working fine,
but I also want the esp easy to reset the switches in domoticz when the Sonoff dual has been powered off.
I can't get this to work currently.
Where can I find information how to update domoticz on boot?
Regards,
Bryan
but I also want the esp easy to reset the switches in domoticz when the Sonoff dual has been powered off.
I can't get this to work currently.
Where can I find information how to update domoticz on boot?
Regards,
Bryan
- 06 Feb 2017, 22:28
- Forum: RFLink: Nederlands support forum
- Topic: Milight device niet zichtbaar in Setup/Devices
- Replies: 4
- Views: 10369
Re: Milight device niet zichtbaar in Setup/Devices
Aj, opgelost. Vergat op de settings pagina accept new hardware devices aan te zetten
- 06 Feb 2017, 19:29
- Forum: RFLink: Nederlands support forum
- Topic: Milight device niet zichtbaar in Setup/Devices
- Replies: 4
- Views: 10369
Re: Milight device niet zichtbaar in Setup/Devices
Helaas werkt het nog steeds niet. Ik gebruik nu de laatste beta, maar na het uitvoeren van het commando
20;17;MiLightv1;ID=F746;SWITCH=01;RGBW=8690;CMD=ON;
op de Setup/Hardware pagina van domoticz komt er geen device bij onder Setup/Devices.
Is er een type die ik handmatig kan aanmaken?
20;17;MiLightv1;ID=F746;SWITCH=01;RGBW=8690;CMD=ON;
op de Setup/Hardware pagina van domoticz komt er geen device bij onder Setup/Devices.
Is er een type die ik handmatig kan aanmaken?
- 05 Feb 2017, 18:25
- Forum: RFLink: Nederlands support forum
- Topic: Milight device niet zichtbaar in Setup/Devices
- Replies: 4
- Views: 10369
Milight device niet zichtbaar in Setup/Devices
Hallo allemaal, Ik probeer een Milight bulb toe te voegen aan domoticz, maar het lukt me niet om een device zichtbaar te krijgen in de lijst met devices. Ik heb de faq gevolgd: http://www.nemcon.nl/blog2/faq Het stopt voor mij na Press OK (btw ik denk dat settings setup moet zijn?): - Power on the M...