IT Worked!!!!! Thanks Arnoldg! Used the flash tool with all the settings as shown here: https://www.letscontrolit.com/forum/viewtopic.php?f=5&t=3386&hilit=DOUT&start=10#p18240 . Now running Esp-easy 2 dev 11 normal,1024. Gpio 15 is the relay and red LED,Gpio 3 is the blue led (which is o...

Thanks Aroldg, will try that this morning........

I got my hands on one and cut a small hole in the bottom to acess the PCB as in the picture, I have reflashed it with espeasy several times, the flash tool says it's been flashed sucsessfully but it refuses to boot after a re-flash. don't get any communication over the serial port after a flash. Any...

Westcott wrote:The problem seems to be that '&para' is replaced by '¶' when the rules are saved.
This has been noted many times before!

Is anyone aware of a workaround/fix?

Hello everyone, I'm just starting with ESPEasy and Domoticz, and I can't seem to put a http send in the rules to send a change in local output state when I use a local input to change it to Dometicz: This is what I put in: on local#switch do if [lightstate#switch]=0 gpio,2,1 SendToHTTP 192.168.0.243...