Search found 44 matches

by ILoveIOT
13 Jan 2019, 13:11
Forum: uPyEasy: General Discussion
Topic: Future of uPyEasy
Replies: 7
Views: 977

Re: Future of uPyEasy

Oh really good news, thank you for the update !! :D
by ILoveIOT
07 Sep 2018, 12:20
Forum: ESP Easy: Software
Topic: Cant connect after update mega-20180822
Replies: 7
Views: 869

Re: Cant connect after update mega-20180822

I was just reading through this thread and in the first post you mention a Wemos D1 mini and now this one. Are there more boards with this problem? No the problem that I found was only this board, was thinking this is a Wemos D1 board (but clearly not), but now I'am 100% sure, where thinking about ...
by ILoveIOT
06 Sep 2018, 11:09
Forum: ESP Easy: Software
Topic: Cant connect after update mega-20180822
Replies: 7
Views: 869

Re: Cant connect after update mega-20180822

Oh,..Yeah first the latest, found the problem, and worked my way down, as you can see after 16 firmware versions that day, I found out that the problem exist from version mega-20180822. Found the module on the internet back.. NodeMCU V3 Lua WIFI Module ESP8266+Extra Memory 32M Flash USB-Serial CH340...
by ILoveIOT
05 Sep 2018, 15:55
Forum: ESP Easy: Software
Topic: Cant connect after update mega-20180822
Replies: 7
Views: 869

Re: Cant connect after update mega-20180822

Hmm this looks strange, your DNS is set to 0.0.0.0 and it reports an IP-address, but also stating it is using DHCP. Yes a bit strange but DNS is not used, so should not be a problem, dhcp gives the same IP as the later manual inserted IP address. What was the version used before this one? Version m...
by ILoveIOT
04 Sep 2018, 16:35
Forum: ESP Easy: Software
Topic: Cant connect after update mega-20180822
Replies: 7
Views: 869

Cant connect after update mega-20180822

Hi, Just wanna inform you that I cannot connect with Wemos D1 Mini after update 20180822, get the error Disconnected! Reason: '(201) No AP found' Connected for 2860 Cant connect to any network, but can scan and see the networks, also the local espconfig network does not show up (APmode) Unit 0 Uptim...
by ILoveIOT
27 Aug 2017, 18:28
Forum: ESP Easy: General Discussion
Topic: ESP active but webpages not reachable after some time
Replies: 21
Views: 5069

Re: ESP active but webpages not reachable after some time

Looks like (not sure) the 1000UF condensator is helping a bit, but the main issue is still there, found more ppl with the same problem. More Info https://github.com/nodemcu/nodemcu-firmware/issues/578 So i guess the issue is only on Nodemcu ? If I ping the ESP the whole day,...the issue is gone, but...
by ILoveIOT
21 Aug 2017, 10:46
Forum: ESP Easy: General Discussion
Topic: ESP active but webpages not reachable after some time
Replies: 21
Views: 5069

Re: ESP active but webpages not reachable after some time

I tried you're solution but no luck,...soldered a 1000UF capacitor between GND and VCC on the header but the issue is still there.
by ILoveIOT
08 Aug 2017, 18:16
Forum: ESP Easy: General Discussion
Topic: ESP active but webpages not reachable after some time
Replies: 21
Views: 5069

Re: ESP active but webpages not reachable after some time

Local Time: 2017-08-08 18:09:07 Free Mem: 22592 (16168 - sendWebPageChunkedData) Start the ping after 5min. Pingen naar 192.168.50.231 met 32 bytes aan gegevens: Antwoord van 192.168.50.199: De doelhost is niet bereikbaar. Antwoord van 192.168.50.199: De doelhost is niet bereikbaar. Antwoord van 192...
by ILoveIOT
08 Aug 2017, 17:12
Forum: ESP Easy: Software
Topic: Rules not in backup file ?
Replies: 2
Views: 731

Re: Rules not in backup file ?

My bad, did not know :oops: was convinced, it was a complete backup.
by ILoveIOT
08 Aug 2017, 16:58
Forum: ESP Easy: Software
Topic: Rules not in backup file ?
Replies: 2
Views: 731

Rules not in backup file ?

I just restored a ESP from the backup.dat file, everything is in, except the rules, not sure if this is normal, because you can make a manual backup of the rules1.txt (under Tools > Flash > click on rules1.txt to make a backup)

Notifcations, controllers, devices, config, etc are in the backup.
by ILoveIOT
01 Aug 2017, 10:11
Forum: ESP Easy: General Discussion
Topic: ESP active but webpages not reachable after some time
Replies: 21
Views: 5069

Re: ESP active but webpages not reachable after some time

Hehe, now trying youre solution on one ESP, guess this should also work fine.

On System#Boot do
TimerSet,1,7200
endon

On Rules#Timer=1 do
WifiDisconnect
WifiConnect
TimerSet,1,7200
endon

What timer settings value do you use ?
by ILoveIOT
01 Aug 2017, 06:27
Forum: ESP Easy: General Discussion
Topic: ESP active but webpages not reachable after some time
Replies: 21
Views: 5069

Re: ESP active but webpages not reachable after some time

Got the same issue here, solved it for now with rebooting the esp every two hours, notice that now, the webserver stays up, the connection solution above was not working because the ESP keeps the wifi connection. Without 2 hours reboot, cannot ping it then anymore, webserver not working, use a fixed...
by ILoveIOT
13 Apr 2017, 01:21
Forum: ESP Easy: Hardware
Topic: Support for ESP32 - the story so far
Replies: 29
Views: 17189

Re: Support for ESP32 - the story so far

In the future if they get cheaper and Arduino core is stable, its a different story. Very true,..that should at least be the base,..but i got the time,..no rush no hurries ;) For me the LAN RJ45 option seems to be the solution, also the bluetooth, usb and micro sd, SSL encryption options might be f...
by ILoveIOT
12 Apr 2017, 15:07
Forum: ESP Easy: Hardware
Topic: Support for ESP32 - the story so far
Replies: 29
Views: 17189

Re: Support for ESP32 - the story so far

What's the current state of ESPEasy on ESP32? Is there a branch for it? No, it will still need some more time, but there is some nice dev on the hardware, the first step ;) https://www.esp32.com/viewtopic.php?t=1149 Not very cheap with 22 euro's, but I guess these prices will drop in time. P.S. wit...
by ILoveIOT
01 Mar 2017, 19:58
Forum: ESP Easy: General Discussion
Topic: Version 1.1.0-beta6 avaiable
Replies: 25
Views: 5941

Re: Version 1.1.0-beta6 avaiable

Thank you,..OTA update its working, so you can update it over the air from 147 to ESPEasy_v2.0.0-dev3_normal_4096

Settings are indeed lost, but you can connect with wifi and put the settings back in.
by ILoveIOT
01 Mar 2017, 18:37
Forum: ESP Easy: General Discussion
Topic: Version 1.1.0-beta6 avaiable
Replies: 25
Views: 5941

Re: Version 1.1.0-beta6 avaiable

Nice work Edwin, and wonderfull you picked up this great project !!!

Can we use the OTA update to go from version 147 to v2.0.0-dev3 ?
by ILoveIOT
22 Jan 2017, 00:38
Forum: Experimental
Topic: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
Replies: 9
Views: 5420

Re: PiEasy - porting ESPEasy to Raspberry Pi (Zero)

Why not an easy esp look, for the front end, and simple scripts or programs at the backend ?

Then we would had an easy config webbased tool, for switching, temp, etc on a PI, would be nice to be compatible for the Rasbarry and Orange PI's.
by ILoveIOT
07 Jan 2017, 04:02
Forum: ESP Easy: General Discussion
Topic: First attempt to install EasyESP
Replies: 4
Views: 4018

Re: First attempt to install EasyESP

I got also the wrong syslog message's, just found out that the syslog UDP port: has to be 0 Jan 7 04:00:49 192.168.50.194 ÿ#001\Ï#0234SÀ¨2Â#001“#000Brievenbus#000#000#000#000#000#000#000#000#000#000#000#000#000#000#000#001#000#000#000 :ÿ?¼)ÿ?Ô#000#000#000Ô#000#000#000#014#002#020@@#000#000#000¼Uÿ?ô...
by ILoveIOT
20 Dec 2016, 14:57
Forum: Experimental
Topic: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
Replies: 9
Views: 5420

Re: PiEasy - porting ESPEasy to Raspberry Pi (Zero)

I think this will not work out of the box .... OrangePi and Reasperry Pi using different cores.
And the RasPiArduino has a lot constants / definitions which refer directly to the BCM2835 Chip.
Lol,..damm,..one dream less ;-)
by ILoveIOT
19 Dec 2016, 02:36
Forum: Experimental
Topic: PiEasy - porting ESPEasy to Raspberry Pi (Zero)
Replies: 9
Views: 5420

Re: PiEasy - porting ESPEasy to Raspberry Pi (Zero)

Yep,...that's a very brilliant idea !! Maybe this could also work on the Orange PI family, they have also some nice flavors; $12.63 - H2 - Wifi - 100MB LAN - 512Mb http://www.orangepi.org/orangepizero/ $13.63 - H3 - HDMI - 100MB LAN - 512Mb http://www.orangepi.org/orangepione/ $24.55 - H5 - HDMI - 1...
by ILoveIOT
08 Dec 2016, 22:49
Forum: Experimental
Topic: Arduino Easy 2560
Replies: 119
Views: 30451

Re: Arduino Easy 2560

Use the storage off the SD card not a option ? get more space to work with.

https://startingelectronics.org/tutoria ... eb-server/

In all mine Mega's with shield I got a 8GB sd card, should be enough storage :mrgreen:
by ILoveIOT
07 Dec 2016, 16:38
Forum: ESP Easy: Hardware
Topic: Support for ESP32 - the story so far
Replies: 29
Views: 17189

Re: Support for ESP32 - the story so far

I don´t wanna be the grinch here ;) Haha,...so don't be,...haha, we where talking about the possibility in a few years,...not days or months. And to be honest I have my doubts that ESPEasy can converted easy to the new platform. Its not easy, guess it must be a version that is incompatible with eac...
by ILoveIOT
07 Dec 2016, 01:44
Forum: ESP Easy: Hardware
Topic: Support for ESP32 - the story so far
Replies: 29
Views: 17189

Re: Support for ESP32 - the story so far

Hehe,..I guess the will add full USB support in the next version :D But its already amazing what they can do with both chips.

Nice overview you have on youre website.
by ILoveIOT
07 Dec 2016, 01:02
Forum: ESP Easy: Hardware
Topic: Support for ESP32 - the story so far
Replies: 29
Views: 17189

Re: Support for ESP32 - the story so far

Omg this is so nice, just saw also the possibility of USB connections, don't know why we should need that,..only know,..we are using it very hard in a few years, ESP32 with 64GB storage ? Mouse and keyboard ? :mrgreen: Would be very sick in the end to have a ESP32, with gigabit controller and 2TB us...
by ILoveIOT
07 Dec 2016, 00:32
Forum: ESP Easy: Hardware
Topic: Support for ESP32 - the story so far
Replies: 29
Views: 17189

Re: Support for ESP32 - the story so far

ESPEasy + ESP32 with Ethernet port or WiFi is my dream combination. :idea: One probe to rule them all. :) Wow, it has "real" RJ45 LAN 10MB connection support, it looks very ugly at the momemt but after some release versions and some new cheap boards for ebay or ali,....wow very nice, thank you for ...
by ILoveIOT
06 Dec 2016, 16:40
Forum: ESP Easy: Hardware
Topic: Using a S0 port from a kWh meter
Replies: 32
Views: 18553

Re: Using a S0 port from a kWh meter

Hehe, ordered the meter yesterday, including the RS485 (CH340) usb dongle, now I only have to wait a "few" days ;) but I was already looking for a good excuse too use a extra ESPEasy Nodemcu setup in my house, now I got only a ESPEasy Nodemcu in production in my mailbox outside :mrgreen: Off topic :...
by ILoveIOT
05 Dec 2016, 22:04
Forum: ESP Easy: Hardware
Topic: Using a S0 port from a kWh meter
Replies: 32
Views: 18553

Re: Using a S0 port from a kWh meter

Ok you've convinced me, and put my own promises aside and go for the RS485 route,...lol wrong forum ;) but if I fail in it, (cannot imagine it use Linux now for 19 years) I still can use the S0 option with ESPEasy. Thank you for the clear explanation, I would bought the wrong meter, and now for a fe...
by ILoveIOT
05 Dec 2016, 16:30
Forum: ESP Easy: Hardware
Topic: Using a S0 port from a kWh meter
Replies: 32
Views: 18553

Re: Using a S0 port from a kWh meter

RS485-application is possible with long cable-length I've already a RS485 bus for the moveable camera's and indeed that cable is long > 50M, so that should not be a problem, don't know how stable this solution is because you already mansion, the signal will take a long route, by the USB conversion ...
by ILoveIOT
04 Dec 2016, 21:26
Forum: ESP Easy: Hardware
Topic: Using a S0 port from a kWh meter
Replies: 32
Views: 18553

Re: Using a S0 port from a kWh meter

Why a 'heavy' 100A&MID SDM230? Sounds stupid but the LCD readings are then normal horizontal to read, instead of vertically, don't mind the extra 10$, also it has a dual pulse port, I guess the accuracy of all these devices are the same. Why RS485-interface & Domoticz not an option? Its quite a dis...
by ILoveIOT
04 Dec 2016, 15:32
Forum: ESP Easy: Hardware
Topic: Using a S0 port from a kWh meter
Replies: 32
Views: 18553

Re: Using a S0 port from a kWh meter

I'm fairly new to pulse meeting, I found a nice meter (Eastron SDM230-Pulse) but will it work with ESPEasy ? Or are there better options ? Looking for a cheap and stable solution for the whole house, I'am always using a minimum of 0.1KWH so I guess the resolution of 1000/1KWH is good enough. https:/...
by ILoveIOT
24 Nov 2016, 15:43
Forum: Experimental
Topic: Arduino Easy 2560
Replies: 119
Views: 30451

Re: Arduino Easy 2560

Very very nice,...nice work Martinus !!!!
by ILoveIOT
29 Sep 2016, 07:53
Forum: ESP Easy: Projects / Applications
Topic: Nodo Small revival project
Replies: 14
Views: 6339

Re: Nodo Small revival project

I wonder what happened with all those Nodo users. Did they all move to Domoticz? Some people will still using the webapp, I guess :D but the majority, like me, moved to Domoticz, some bought a crappy expensive system, hehe With all the respect for the people, maybe its a idea to have a sort of poll...
by ILoveIOT
28 Sep 2016, 09:41
Forum: ESP Easy: Projects / Applications
Topic: Nodo Small revival project
Replies: 14
Views: 6339

Re: Nodo Small revival project

i dont know what nodo is Nodo is a great big Arduino project (but it looks at the moment end of life), where you can use different Arduino's, mega, minipro, uno, with several device's, also some RF devices, IR, switches, relays, special nodo shields with IR, RF433, Clock, SPK etc, ethernet shield, ...
by ILoveIOT
28 Sep 2016, 00:21
Forum: ESP Easy: Projects / Applications
Topic: Nodo Small revival project
Replies: 14
Views: 6339

Re: Nodo Small revival project

Why don't we restart the whole nodo project, based on the V3.7 (r744) core and everything in English, and not so based on one person ? I'am not a C++ programmer, but other language is no problem, also maybe thinking to simple, but got allot of time. The "world" should be in our hands :D I guess ther...
by ILoveIOT
23 Dec 2015, 03:20
Forum: ESP Easy: Software
Topic: MySensors goes ESP!!
Replies: 91
Views: 43562

Re: MySensors goes ESP!!

Openhab ? but then again, if I see java, and think about 200+ devices, its the very wrong way, and domoticz writen in C, I guess the right way. "We" can choose here, Mysensors has the support for many controller and protocols, and allot of sensors, so I guess it will save you some time there based o...
by ILoveIOT
07 Dec 2015, 19:33
Forum: ESP Easy: General Discussion
Topic: Speaker function ?
Replies: 35
Views: 9579

Re: Speaker function ?

Thank you for the lead, http://192.168.50.194/control?cmd=Pulse,14,1,100 did the trick for me, single tone do, but it does the job ;)

With PWM you have to send a off command as well, pulse stops after 100ms, in this case.
by ILoveIOT
03 Dec 2015, 16:22
Forum: ESP Easy: General Discussion
Topic: Speaker function ?
Replies: 35
Views: 9579

Re: Speaker function ?

Yes,..this piezo buzzer (speaker) I mean, is it already working ?
by ILoveIOT
02 Dec 2015, 11:29
Forum: ESP Easy: General Discussion
Topic: Speaker function ?
Replies: 35
Views: 9579

Speaker function ?

Maybe its easy (don't know) to implement to have a speaker function so you get a acknowledge from Domoticz, with some different tones, for different functions.

http://<ESP IP address>/control?cmd=spk,<pin>,1-2-3 etc
by ILoveIOT
21 Nov 2015, 15:34
Forum: ESP Easy: Software
Topic: TSOP4838 IR recieve in Domoticz
Replies: 5
Views: 4867

Re: IR recieve in Domoticz

I was hoping blocky could do this for us, but if we must use a script for it, I guess its look like; Script name : script_device_ir.lua ------- -- This line must shows up in the Domoticz log without doing anything print('DEBUG LOG : check if C:\\Program Files (x86)\\Domoticz\\scripts\\lua\\script_de...
by ILoveIOT
18 Nov 2015, 22:48
Forum: ESP Easy: Software
Topic: TSOP4838 IR recieve in Domoticz
Replies: 5
Views: 4867

TSOP4838 IR recieve in Domoticz

Maybe someone can confirm this is the right setup for recieving IR codes in Domoticz; Build: 42 Device: Infrared - TSOP4838 Name: (empty) IDX / Var: 5 (in mine case) 1st GPIO: GPIO-14 (in mine case) Pull UP: Yes Inversed: No Value Name 1: IR From my remote control I send "Code a5602e4d" (ESP serial ...
by ILoveIOT
16 Nov 2015, 20:08
Forum: ESP Easy: Hardware
Topic: ESP-14 WiFi Module Combines ESP8266 with STM8S MCU
Replies: 2
Views: 1550

ESP-14 WiFi Module Combines ESP8266 with STM8S MCU

Maybe interesting ESP-14 WiFi Module Combines ESP8266 with STM8S MCU, I dont see any cheap adapter boards yet, just only some starting at 5$ http://www.aliexpress.com/w/wholesale-esp%25252d14.html?site=nld&groupsort=1&SortType=price_asc&g=y&SearchText=esp-14&initiative_id=SB_20151116105751&shipCount...
by ILoveIOT
16 Nov 2015, 00:12
Forum: ESP Easy: Software
Topic: R42 password problem
Replies: 0
Views: 651

R42 password problem

I noticed that R42 is not asking for a password, for the second time. So I can login with a password (so far so good), but on every extra device (phone/tablet) I can entering the device without its asking for a password, you will have to reboot the device before its asking again for a password. Also...
by ILoveIOT
01 Nov 2015, 14:49
Forum: ESP Easy: Hardware
Topic: support for PCF8574 ?
Replies: 6
Views: 2134

Re: support for PCF8574 ?

Thank you for the anwsers, I've allot of the PCF8574, so that's why my question, but as you explained,
I will order the MCP23017 chip, and wait a bit ;) Thanks !!
by ILoveIOT
01 Nov 2015, 11:08
Forum: ESP Easy: Hardware
Topic: support for PCF8574 ?
Replies: 6
Views: 2134

support for PCF8574 ?

First of all,..very nice project,..nice work !!

Is the PCF8574 chip supported, or will it be supported in the future ?
And can I use it with a max of 8 chips on the same I2C bus ?