LCD,3,1, 'TEMPERATUUR [woonkamer#temperature]'
is this rule correct ?
but the output is
temperatuur 23.8
is this a bug ?
Search found 26 matches
- 19 Dec 2019, 18:23
- Forum: ESP Easy: General Discussion
- Topic: change rules after mega-20191130 ?
- Replies: 7
- Views: 6853
- 19 Dec 2019, 00:48
- Forum: ESP Easy: General Discussion
- Topic: change rules after mega-20191130 ?
- Replies: 7
- Views: 6853
Re: change rules after mega-20191130 ?
one problem is solved
LCD,3,1, temperatuur [woonkamer#temperature]
must be
LCD,3,1, 'temperatuur [woonkamer#temperature]'
but
LCD,3,1, 'TEMPERATUUR [woonkamer#temperature]'
shows temperatuur 23.0 on display
I cannot show capital characters
LCD,3,1, temperatuur [woonkamer#temperature]
must be
LCD,3,1, 'temperatuur [woonkamer#temperature]'
but
LCD,3,1, 'TEMPERATUUR [woonkamer#temperature]'
shows temperatuur 23.0 on display
I cannot show capital characters
- 18 Dec 2019, 22:38
- Forum: ESP Easy: General Discussion
- Topic: change rules after mega-20191130 ?
- Replies: 7
- Views: 6853
change rules after mega-20191130 ?
in software version mega-20191104 the following works perfectly in software version mega-20191130 the following does not work anymore do I have to change anything in the rules settings ? I cannot see the temperature on lcd I can't put uppercase in lcd it's shows only lowercase characters On System#B...
- 25 May 2019, 19:15
- Forum: ESP Easy: Software
- Topic: esp8266 12F 4M- lack of SSID
- Replies: 1
- Views: 1678
Re: esp8266 12F 4M- lack of SSID
Hello Demsy, try when you are in putty settings (you cannot see it) you see the actual settings then type WIFISSID MYFIRSTESPEASY (for example) WIFIKey secret wificonnect if you give settings again then you see your IPadress etc go with your browser to the IP and you can change everything you want
- 15 May 2019, 00:53
- Forum: RFlink: General Discussions
- Topic: More than 16 RTS remotes
- Replies: 3
- Views: 5398
Re: More than 16 RTS remotes
Stuntteam , do you have any idea when next release is coming ?
I know the next release is fully rewritten
thanks in advance
Adval
I know the next release is fully rewritten
thanks in advance
Adval
- 05 May 2019, 01:42
- Forum: ESP Easy: General Discussion
- Topic: Switch to Rules Set 2
- Replies: 2
- Views: 2286
Re: Switch to Rules Set 2
yes I mean the 4 pages
Thomas thanks it works now
Thomas thanks it works now
Code: Select all
//Rules Set 2
TimerSet,1,1
On Rules#Timer=1 do
NEXTION,page0.t4.txt="Test"
NEXTION,page0.t31.txt="12345"
NEXTION,page0.t111.txt="%systime%"
TimerSet,1,1
endon
- 04 May 2019, 22:20
- Forum: ESP Easy: General Discussion
- Topic: Switch to Rules Set 2
- Replies: 2
- Views: 2286
Switch to Rules Set 2
How can I switch to Rules Set 2 ? On System#Boot do TimerSet,1,1 NEXTION,page0.t4.txt="Test" NEXTION,page0.t20.txt="Temperatuur" NEXTION,page0.t21.txt="Vochtigheid" NEXTION,page0.t22.txt="Electra" NEXTION,page0.t23.txt="Trap-Groen" NEXTION,page0.t24....
- 30 Apr 2019, 21:03
- Forum: ESP Easy: Hardware
- Topic: Universal PCB relais / I/O / NEXTION display
- Replies: 4
- Views: 5633
Re: Universal PCB relais / I/O / NEXTION display
Transistor is inside Q1 bc557
Ad (adval40)
Ad (adval40)
- 28 Apr 2019, 02:30
- Forum: ESP Easy: Hardware
- Topic: Universal PCB relais / I/O / NEXTION display
- Replies: 4
- Views: 5633
Universal PCB relais / I/O / NEXTION display
I have make some PCB for esp8266
It's a universal board with several I/O
included 220 powersupply
2x I2c
1x Nextion Display
4x Relais NC / NO
1x 4 outputs ttl
1x 8 Input/output
1x expansionboard
adval40
It's a universal board with several I/O
included 220 powersupply
2x I2c
1x Nextion Display
4x Relais NC / NO
1x 4 outputs ttl
1x 8 Input/output
1x expansionboard
adval40
- 04 Mar 2019, 19:37
- Forum: ESP Easy: Software
- Topic: read MQTT variable on ESPeasy
- Replies: 5
- Views: 3397
Re: read MQTT variable on ESPeasy
i'm sorry
the output on display row 4,1
... verbruik
the output on display row 4,1
... verbruik
- 04 Mar 2019, 19:22
- Forum: ESP Easy: Software
- Topic: read MQTT variable on ESPeasy
- Replies: 5
- Views: 3397
Re: read MQTT variable on ESPeasy
no it didn't work
lcd display show
...verbruik
lcd display show
...verbruik
- 04 Mar 2019, 18:24
- Forum: ESP Easy: Software
- Topic: read MQTT variable on ESPeasy
- Replies: 5
- Views: 3397
read MQTT variable on ESPeasy
I have a LUA script running on domoticz MQTT Broker works fine on domoticz verbruik = tonumber(stroomverbruik) os.execute('mosquitto_pub -h 127.0.0.1 -t verbruik -u mqtt -P mqtt -m '..verbruik) I want to display variable verbruik on lcd display How can I write this to LCD ? On System#Boot do TimerSe...
- 28 Dec 2017, 20:55
- Forum: RFLink: Nederlands support forum
- Topic: Twee RFlinks 433,92 en 868 Mhz
- Replies: 2
- Views: 10759
Re: Twee RFlinks 433,92 en 868 Mhz
je kunt 2 rflinks gebruiken met ieder een eigen arduino mega en dan naar 1 raspberry waar domoticz opstaat
gr Ad
gr Ad
- 21 Dec 2017, 22:01
- Forum: RFLink: Nederlands support forum
- Topic: aanmelden fut037 domoticz/NRF24L01
- Replies: 0
- Views: 8896
aanmelden fut037 domoticz/NRF24L01
Ik probeer een FUT037 aan te melden via domoticz
via hardware stuur ik volgende code weg
10;MiLightv1;A4F746;01;34BC;PAIR;
ik krijg deze rgb controller niet aangemeld
wat doe ik fout ?
gr adval40
via hardware stuur ik volgende code weg
10;MiLightv1;A4F746;01;34BC;PAIR;
ik krijg deze rgb controller niet aangemeld
wat doe ik fout ?
gr adval40
- 20 Nov 2017, 23:10
- Forum: ESP Easy: Software
- Topic: text to lcd2004 (espeasy)
- Replies: 9
- Views: 8222
Re: text to lcd2004 (espeasy)
the error is on the log from domoticz
Ad
the display is connected to a esp12 with espeasycommandArray['OpenURL'] = '192.168.0.144/control?cmd=lcd,3,1,ditiseentest'
print ('test ')
return commandArray
Ad
- 20 Nov 2017, 20:41
- Forum: ESP Easy: Software
- Topic: text to lcd2004 (espeasy)
- Replies: 9
- Views: 8222
Re: text to lcd2004 (espeasy)
no then you came into de espeasy
- 20 Nov 2017, 18:31
- Forum: ESP Easy: Software
- Topic: text to lcd2004 (espeasy)
- Replies: 9
- Views: 8222
Re: text to lcd2004 (espeasy)
Hello , I have tried a lot this is a lua script commandArray['OpenURL']= 'http://192.168.0.144/control?cmd=lcd,3,1,test' I want to send data tot a lcd2004 display It works but an error in the log file 2017-11-20 18:30:06.213 Error: Error opening url: http://192.168.0.144/control?cmd=lcd,3,1,test 201...
- 08 Nov 2017, 00:39
- Forum: ESP Easy: Software
- Topic: %sysday% not working?
- Replies: 17
- Views: 13701
Re: %sysday% not working?
I have found my problem
i didn't have the mega version
i didn't have the mega version
- 30 Oct 2017, 23:42
- Forum: ESP Easy: Software
- Topic: How to configure switch input?
- Replies: 3
- Views: 3083
Re: How to configure switch input?
Did you refresh your screen after changing the port ?
- 30 Oct 2017, 11:32
- Forum: ESP Easy: Software
- Topic: text to lcd2004 (espeasy)
- Replies: 9
- Views: 8222
Re: text to lcd2004 (espeasy)
you mean this ?
commandArray['OpenURL'] = "http://192.168.0.144/control?cmd=lcd,3,1,ditiseentest"
print ('test ')
return commandArray
this gives the same error ...
commandArray['OpenURL'] = "http://192.168.0.144/control?cmd=lcd,3,1,ditiseentest"
print ('test ')
return commandArray
this gives the same error ...
- 28 Oct 2017, 19:07
- Forum: ESP Easy: Software
- Topic: text to lcd2004 (espeasy)
- Replies: 9
- Views: 8222
text to lcd2004 (espeasy)
I will send text from domoticz to a lcd2004 on an espeasy board commandArray = {} commandArray['OpenURL'] = '192.168.0.144/control?cmd=lcd,3,1,ditiseentest' print ('test ') return commandArray it works but in the logfile i see 2017-10-28 19:03:30.280 Error: Error opening url: 192.168.0.144/control?c...
- 06 Aug 2017, 20:16
- Forum: ESP Easy: Software
- Topic: Send txt to lcd in a rule
- Replies: 3
- Views: 3128
Re: Send txt to lcd in a rule
That works
but i want have a delay to show the text before start
can anybody help me to with the rules
On System#Boot do
lcd,1,1,hi there
timerSet,1,10000
endon
On Rules#Timer=1 do
lcd ,2,1, terug naar scherm
endon
thanks in advance
Ad
but i want have a delay to show the text before start
can anybody help me to with the rules
On System#Boot do
lcd,1,1,hi there
timerSet,1,10000
endon
On Rules#Timer=1 do
lcd ,2,1, terug naar scherm
endon
thanks in advance
Ad
- 06 Aug 2017, 01:59
- Forum: ESP Easy: Software
- Topic: Send txt to lcd in a rule
- Replies: 3
- Views: 3128
Send txt to lcd in a rule
How can I send text to a lcd2004 into a rule ?
tkx Ad
tkx Ad
- 12 Jun 2017, 23:41
- Forum: ESP Easy: Software
- Topic: show temperature on LCD2004
- Replies: 8
- Views: 9672
Re: show temperature on LCD2004
Thanks for the solution.
It works now
greetings Ad Eindhoven
It works now
greetings Ad Eindhoven
- 12 Jun 2017, 19:58
- Forum: ESP Easy: Software
- Topic: show temperature on LCD2004
- Replies: 8
- Views: 9672
Re: show temperature on LCD2004
I make some pictures
tkx ad
tkx ad
- 12 Jun 2017, 19:14
- Forum: ESP Easy: Software
- Topic: show temperature on LCD2004
- Replies: 8
- Views: 9672
show temperature on LCD2004
Today i use an dht22 on my esp12e dev board Also i have used an lcd 2004 But I can't read the value on my display the value is correct I can see it on my external domoticz . the value from environment DHT11/12/22 is Temperature on the display line 2 [DHT#Temperature] C thanks in advance Ad