Search found 124 matches
- 07 Jan 2022, 14:56
- Forum: ESP Easy: Hardware
- Topic: Wireless Switches for domoticz
- Replies: 4
- Views: 7902
Re: Wireless Switches for domoticz
Does look interesting but needing a phone to configure it is a no go for me. Inevitably the software will need subscription or won't be maintained. On the other hand, I like the fact they want to make grandiloquent appearances thanks to Vamsi, the Costumer care !
- 16 Dec 2021, 11:48
- Forum: ESP Easy: Hardware
- Topic: Wireless Switches for domoticz
- Replies: 4
- Views: 7902
Re: Wireless Switches for domoticz
Thanks. I'm going to read a bit about Matter, the new H2 ESP32 & ZigBee then, I see that Risc V is everywhere now. I've seen some EnOcean batteryless switch but those are really expensive. My system works so I can wait before upgrading. Let's read and I'll come back to you as a SME if I have som...
- 14 Dec 2021, 17:13
- Forum: ESP Easy: Hardware
- Topic: Wireless Switches for domoticz
- Replies: 4
- Views: 7902
Wireless Switches for domoticz
I'm looking for simple 2.4GHz wifi wall switches. Something to put on a wall without MAINS. Hi everyone, I have several 433MHz radio switches & probes. RFLink & RFXCom seem to be dead projects, no FW update, Forum silent... Recently my RFLink on my VM works very capriciously, dunno why. For...
- 06 May 2021, 15:47
- Forum: ESP Easy: Software
- Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
- Replies: 7
- Views: 5248
Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Perfect, I'm just looking to quickly modify the readme so it'll be easier for people to figure it out. No need for a complex excel sheet then, just a table will be fine, let me try it.
Cheers!
Cheers!
- 06 May 2021, 14:27
- Forum: ESP Easy: Software
- Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
- Replies: 7
- Views: 5248
Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Is normal included in all the testings but not necessarily in Display or Energy or is Normal in every version ?
And testing in every Testing A-D ?
And testing in every Testing A-D ?
- 06 May 2021, 14:16
- Forum: ESP Easy: Software
- Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
- Replies: 7
- Views: 5248
Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D
I'm doing an excel sheet that'll list the plugins by release. Maybe it won't be too problematic to have a selection sheet where you select the plugins you want and it tells you what release you can use. If that's useful I can try to help but it'll require a check before each release so that's more w...
- 06 May 2021, 13:20
- Forum: ESP Easy: Software
- Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
- Replies: 7
- Views: 5248
Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Perfect thank you. I think that must be included in the Readme.txt it seems this thing wasn't updated for a while.
Cheers !
Cheers !
- 06 May 2021, 13:01
- Forum: ESP Easy: Software
- Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
- Replies: 7
- Views: 5248
ESP-Easy_mega_20210503_test_A vs B vs C vs D
Hi,
I tried to look in the docs, the readme etc. bit don't seem to understand what is included in each package. Am I missing something ?
Thanks.
I tried to look in the docs, the readme etc. bit don't seem to understand what is included in each package. Am I missing something ?
Thanks.
- 28 Apr 2021, 20:19
- Forum: ESP Easy: Hardware
- Topic: ESP01S & Latest .bin
- Replies: 3
- Views: 7009
Re: ESP01S & Latest .bin
Thanks, it took a lot of reboot some erase and re-flash but at the end I managed to upload the latest 1MB version using the flash.cmd & esptool.exe from R120 (just renaming the bin something the batch will understand). I had some issues with many boards (all sorts) where it refuses to connect to...
- 28 Apr 2021, 17:48
- Forum: ESP Easy: Hardware
- Topic: ESP01S & Latest .bin
- Replies: 3
- Views: 7009
ESP01S & Latest .bin
I just read too late that using ESP01S is discouraged... I was just wondering if there's something more recent than R120 that I can use, particularly as I'd gladly like to see them in the node list.
I don't need OTA and can compile if needed.
Thanks !
I don't need OTA and can compile if needed.
Thanks !
- 09 Mar 2021, 15:49
- Forum: ESP Easy: Software
- Topic: Build feature request
- Replies: 15
- Views: 8172
Re: Build feature request
Burned...
It's true of course, I was more thinking about a way (and maybe you got that already and I haven't seen it yet) to propagate some setting to all the nodes like new domain name. For example, the syslog is still by IP etc.
Not really important, just something to keep in mind.
It's true of course, I was more thinking about a way (and maybe you got that already and I haven't seen it yet) to propagate some setting to all the nodes like new domain name. For example, the syslog is still by IP etc.
Not really important, just something to keep in mind.
- 09 Mar 2021, 15:05
- Forum: ESP Easy: Software
- Topic: Build feature request
- Replies: 15
- Views: 8172
Re: Build feature request
Thank you very much Grumpf for this build. Sorry it has taken so long to test this and get back to you. I'm in the middle of a IoT POC for work and converting most of my machines over to Ubuntu here in my office so my schedule has been swamped. Your build worked just fine. I have both servo control...
- 01 Mar 2021, 14:40
- Forum: ESP Easy: Software
- Topic: Build feature request
- Replies: 15
- Views: 8172
Re: Build feature request
You can find the instructions here : https://espeasy.readthedocs.io/en/latest/Participate/ArduinoIDE.html I can also simply share my entire portable Espeasy as it's only free material. You unzip and run the main exe then specify the boards, that should work like that. Meanwhile, I added your require...
- 28 Feb 2021, 18:10
- Forum: ESP Easy: Software
- Topic: Build feature request
- Replies: 15
- Views: 8172
Re: Build feature request
Don't thank me until it works !
I just made some tests for me and for what I need + my custom 012 LCD with special chars. Tried to upload the bin for Wemos D1 mini using the tool & OTA and both worked so I'm pleased with myself.
I just made some tests for me and for what I need + my custom 012 LCD with special chars. Tried to upload the bin for Wemos D1 mini using the tool & OTA and both worked so I'm pleased with myself.
- 28 Feb 2021, 16:37
- Forum: ESP Easy: Software
- Topic: Build feature request
- Replies: 15
- Views: 8172
Re: Build feature request
If you can uncomment the plugins you need in this file and post it back I'll try to compile something for you. Scroll until you see the plugin section and uncomment (remove leading //) everything you use. We're talking for this one right ? wemos-d1-mini-1.jpg #ifndef ESPEASY_CUSTOM_H #define ESPEASY...
- 27 Feb 2021, 13:44
- Forum: ESP Easy: Software
- Topic: Dev in mega-20210223
- Replies: 2
- Views: 3726
Re: Dev in mega-20210223
Thanks. I added my WOT to the thread. Hope it helps a bit with some decisions as I don't really understand fully some of the subjects...
Cheers !
Cheers !
- 26 Feb 2021, 17:45
- Forum: ESP Easy: Software
- Topic: Dev in mega-20210223
- Replies: 2
- Views: 3726
Dev in mega-20210223
Hi, sorry I tried to see about the dev version in latest build and couldn't figure out. I read about the different versions in, the docs & the readme but that's sill a bit mysterious to me, may need to be updated a bit, or I miss the correct file explaining it :( Can someone help ? Thanks, Grumpf.
- 09 Feb 2021, 19:28
- Forum: ESP Easy: Projects / Applications
- Topic: Matrix Display with movement detector for custom message
- Replies: 5
- Views: 14900
Re: Matrix Display with movement detector for custom message
Well in this case I guess I'll wait a bit and try to finish some other projects too.
Cheers !
Cheers !
- 09 Feb 2021, 18:33
- Forum: ESP Easy: Hardware
- Topic: Need advice on espeasy switch
- Replies: 3
- Views: 11490
Re: Need advice on espeasy switch
Was on another projects for a while. I've bookmarked this and post as soon as I've made some progress.
Tx again.
Tx again.
- 09 Feb 2021, 17:27
- Forum: ESP Easy: Projects / Applications
- Topic: Matrix Display with movement detector for custom message
- Replies: 5
- Views: 14900
Matrix Display with movement detector for custom message
CURL or Espeasy + Serial server ? I'm using the example in the MD_MAX72XX for Esp8266 to display a custom message to a 128X8 SPI matrix display. The code works and I slightly modified it with a timer and a movement detector (RCWL0516) so the leds will be off when noone is watching (to prevent light...
- 09 Feb 2021, 16:57
- Forum: ESP Easy: Hardware
- Topic: Esp Easy max7219 Dot Matrix
- Replies: 38
- Views: 13411
Re: Esp Easy max7219 Dot Matrix
Just a post to subscribe to this topic. I'm going to ask help for a project with that as well. Cheers.
Here:
viewtopic.php?f=2&t=8322
Here:
viewtopic.php?f=2&t=8322
- 09 Feb 2021, 15:42
- Forum: ESP Easy: Software
- Topic: Assembling own selection of Plug-Ins — Compilation via platformio required?
- Replies: 9
- Views: 8169
Re: Assembling own selection of Plug-Ins — Compilation via platformio required?
PlateformIO was a bit too intimidating for me so I went the lazy road and manually added the plugins I wanted using ArduinoIDE. Here's what I've done to compile : First, create a portable version of your IDE for Espeasy https://www.arduino.cc/en/Guide/PortableIDE , it's small and allow you avoid ret...
- 04 Feb 2021, 17:40
- Forum: Introduce yourself
- Topic: Hi everyone
- Replies: 1
- Views: 3406
Re: Hi everyone
Still in engineering or totally different field ? For a living ?
- 28 Jan 2021, 08:08
- Forum: ESP Easy: General Discussion
- Topic: Connect 2 units by wire
- Replies: 6
- Views: 5348
Re: Connect 2 units by wire
:D You're like many of my clients: I have to play Spanish inquisition with them until they finally spit it out! We're only on the second Why, the third one should work (check here https://philsvitek.com/how-to-find-the-real-problem-by-asking-the-three-whys/) TL;DR you're not telling what you want to...
- 26 Jan 2021, 08:47
- Forum: ESP Easy: General Discussion
- Topic: Connect 2 units by wire
- Replies: 6
- Views: 5348
Re: Connect 2 units by wire
Like Thomas said, you can try using the existing communication buses between your pi & the Esp like serial, I²C or SPI. You can find a lot of examples for Arduinos & Pi on the web. But you didn't really answer my question : I understand you want a wire between the units but why ? Unless it's...
- 25 Jan 2021, 08:37
- Forum: ESP Easy: General Discussion
- Topic: Flash Problem Lolin ESP32 Board
- Replies: 18
- Views: 14275
Re: Flash Problem Lolin ESP32 Board
Thanks both. I knew they were slow but didn't know that the red/green ones needed full screen refresh. That'll certainly guide my choice. I want to use them for a 4 (8) capacitor moisture monitor + T°/H° But I think I've polluted this thread enough with irrelevant topics. If you want to delete those...
- 24 Jan 2021, 20:54
- Forum: ESP Easy: General Discussion
- Topic: Flash Problem Lolin ESP32 Board
- Replies: 18
- Views: 14275
Re: Flash Problem Lolin ESP32 Board
Oh, I knew, don't worry. No weight on your shoulders here, I'm just playing with new toys. If it works with Espeasy one day, great. If not, it's ok. I got several oddballs boards just because I'm a compulsive buyer and when they finally arrive 6 years later in the mail I usually had forgotten what I...
- 24 Jan 2021, 20:39
- Forum: ESP Easy: General Discussion
- Topic: Flash Problem Lolin ESP32 Board
- Replies: 18
- Views: 14275
Re: Flash Problem Lolin ESP32 Board
@Ath, Thanks do you know the particular e-ink display this is targeting ? @TD-er Thanks, Basically they increased security for IOT and optimized some instructions for AI-focused operations (whatever that means, your guess is as good as mine). Oh, and also very low power mode. Dual core@240 MHz BLE 5...
- 24 Jan 2021, 17:40
- Forum: ESP Easy: General Discussion
- Topic: Flash Problem Lolin ESP32 Board
- Replies: 18
- Views: 14275
Re: Flash Problem Lolin ESP32 Board
That I didn't, but forgetting to tick the .bin I was your man ! Worked like a charm, this tool looked a bit intimidating at first but thanks to the doc it was easy. Now I can finally access latest version and look through system variables webpage. I missed the internal T° but found the touch ESP32 d...
- 24 Jan 2021, 17:00
- Forum: ESP Easy: General Discussion
- Topic: Flash Problem Lolin ESP32 Board
- Replies: 18
- Views: 14275
Re: Flash Problem Lolin ESP32 Board
My bad. I confounded my folders, I meant R20100. Gonna look at your link, thanks.
- 24 Jan 2021, 16:40
- Forum: ESP Easy: General Discussion
- Topic: Flash Problem Lolin ESP32 Board
- Replies: 18
- Views: 14275
Re: Flash Problem Lolin ESP32 Board
Hi everyone, sorry for necroposting here but I need some guidance. I got this Lolin D32 Pro 2021-01-24 16_38_32-Photos.jpg and it works flashed with R120. If I try the ESP.Easy.Flasher either it give me error2 or say it's ok but nothing changed. I tried using different .bin with the R120 esptool wit...
- 24 Jan 2021, 14:55
- Forum: ESP Easy: General Discussion
- Topic: Connect 2 units by wire
- Replies: 6
- Views: 5348
Re: Connect 2 units by wire
Hi, what exactly are you trying to achieve ? If you explain your project we can try to help you better.
Cheers !
Cheers !
- 16 Jan 2021, 19:53
- Forum: ESP Easy: Projects / Applications
- Topic: Plugin 01 (Switch ) Push Button Longpress
- Replies: 4
- Views: 9153
Re: Plugin 01 (Switch ) Push Button Longpress
Glad you managed, I'll try again and share my experience with you if you don't mind.
Talk to you soon,
Thanks.
Talk to you soon,
Thanks.
- 16 Jan 2021, 18:55
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
All right, this is what I got so far. Any advice welcome : So 2 devices, one for the motion sensor and one for a Led or just variable status. 2021-01-16 18_30_12-Thirty-two.png Device one, the sensor : 2021-01-16 18_31_08-Thirty-two.png Device two, the variable/Led 2021-01-16 18_31_29-Thirty-two.png...
- 16 Jan 2021, 16:02
- Forum: ESP Easy: Projects / Applications
- Topic: Plugin 01 (Switch ) Push Button Longpress
- Replies: 4
- Views: 9153
Re: Plugin 01 (Switch ) Push Button Longpress
Simply don't assign any action to it.
I say that theorically, longpress or double never worked for me so far.
I say that theorically, longpress or double never worked for me so far.
- 14 Jan 2021, 19:02
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
- 14 Jan 2021, 18:53
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
Mmm not sure :? , I changed for D5 and it triggers fine but stops after 10 seconds, even if I dance in front of it while active (fully clothed be reassured). Shouldn't it retrigger the counter to 10 every time it detects a movement ? Also, when I do that, it seems that it won't re-trigger for a cert...
- 14 Jan 2021, 18:35
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
Will do, thanks again !
- 14 Jan 2021, 18:02
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
I'm trying something like this : on wave#State do if [wave#state]=1 gpio,2,0 timerSet 1,10 endon on Rules#Timer=1 do gpio,2,1 endon It works but it is erratic, sometimes the led stays on longer and sometimes the sensor doesn't pick up movement for a while... Dunno why. Is it because of my device dec...
- 14 Jan 2021, 10:30
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
Thanks a lot. The TCRT5000 can be use for waving your hand above a clock for example ?
- 14 Jan 2021, 09:00
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
I guess I can do it this way. It'll require a bit more programming as I need Domoticz to send and on/off signal to the motion detection mechanism. I also want a radio switch to turn on the light and in this case prevent the off when no motion is detected. I'll need to research how to send a variable...
- 13 Jan 2021, 19:36
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
Hi, thanks for the quick reaction and your advice about those ! I want to control the backlight of LCD or Led matrix to only lit when there's someone to watch. Project one is a simple 2004 LCD: wave in front of it and backlight on (I know I'd have to limit the range with a resistor but small steps)....
- 13 Jan 2021, 15:54
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
Hi guys, thanks for the tip, those guys are awesome. Now, I googled a lot and search this forum but couldn't find a simple example of a capacitor to add for 1 or 2 or 5 minutes delay to C-. I got the (1/f)*32768 and the 2021-01-13 15_50_41-Clipboard.png But Engineer school was 30 years ago... Erm, D...
- 30 Dec 2020, 17:39
- Forum: ESP Easy: Hardware
- Topic: MAX30100/30102 heartbeat and oxygenation sensor
- Replies: 9
- Views: 18245
Re: MAX30100/30102 heartbeat and oxygenation sensor
Indeed, still a good sign though .
- 30 Dec 2020, 17:20
- Forum: ESP Easy: Hardware
- Topic: MAX30100/30102 heartbeat and oxygenation sensor
- Replies: 9
- Views: 18245
Re: MAX30100/30102 heartbeat and oxygenation sensor
Placing my answer here in order to be notified. I'll be interested too.
This example works flawlessly https://create.arduino.cc/projecthub/Su ... 102-c2b4d8 and the the I²C scan of the latest espeasy finds them too.
This example works flawlessly https://create.arduino.cc/projecthub/Su ... 102-c2b4d8 and the the I²C scan of the latest espeasy finds them too.
- 27 Dec 2020, 17:35
- Forum: ESP Easy: Hardware
- Topic: Need advice on espeasy switch
- Replies: 3
- Views: 11490
Re: Need advice on espeasy switch
Looks great Chris, I'll look over it tomorrow thanks a lot for your time !
Cheers.
Cheers.
- 02 Dec 2020, 22:10
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
All right I checked comparison youtube videos and ordered some rcwl-0516. They look great. Only 3 months to wait for them to be delivered...
Thanks guys, @Ath keep me posted when your sensor arrives.
Cheers !
Thanks guys, @Ath keep me posted when your sensor arrives.
Cheers !
- 02 Dec 2020, 19:48
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Re: Contactless wakeup for LCD
Cheap and tricky ? That'll remind me of my earliest love life. Any link or examples ?
Thanks.
Thanks.
- 02 Dec 2020, 18:53
- Forum: ESP Easy: Hardware
- Topic: Contactless wakeup for LCD
- Replies: 22
- Views: 15724
Contactless wakeup for LCD
I'm wondering if someone has a better option than a PIR to trigger the display of a LCD after time out. Objective is to have a 2004 in the bedroom that can be used as a clock with some messages from domoticz. All of that works for now, the LCD goes off and as soon as the PIR detects a movement, the ...
- 26 Nov 2020, 17:01
- Forum: ESP Easy: Software
- Topic: Neopixel (Basic) WS2812b do not work on wemos d1
- Replies: 13
- Views: 10282
Re: Neopixel (Basic) WS2812b do not work on wemos d1
Happy to help. And if you want to drive a lot of leds, don't forget the capa.
Cheers.
Cheers.