Search found 124 matches

by Grumpf
07 Jan 2022, 14:56
Forum: ESP Easy: Hardware
Topic: Wireless Switches for domoticz
Replies: 4
Views: 7865

Re: Wireless Switches for domoticz

Does look interesting but needing a phone to configure it is a no go for me. Inevitably the software will need subscription or won't be maintained. On the other hand, I like the fact they want to make grandiloquent appearances thanks to Vamsi, the Costumer care !
by Grumpf
16 Dec 2021, 11:48
Forum: ESP Easy: Hardware
Topic: Wireless Switches for domoticz
Replies: 4
Views: 7865

Re: Wireless Switches for domoticz

Thanks. I'm going to read a bit about Matter, the new H2 ESP32 & ZigBee then, I see that Risc V is everywhere now. I've seen some EnOcean batteryless switch but those are really expensive. My system works so I can wait before upgrading. Let's read and I'll come back to you as a SME if I have som...
by Grumpf
14 Dec 2021, 17:13
Forum: ESP Easy: Hardware
Topic: Wireless Switches for domoticz
Replies: 4
Views: 7865

Wireless Switches for domoticz

I'm looking for simple 2.4GHz wifi wall switches. Something to put on a wall without MAINS. Hi everyone, I have several 433MHz radio switches & probes. RFLink & RFXCom seem to be dead projects, no FW update, Forum silent... Recently my RFLink on my VM works very capriciously, dunno why. For...
by Grumpf
06 May 2021, 15:47
Forum: ESP Easy: Software
Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Replies: 7
Views: 5116

Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D

Perfect, I'm just looking to quickly modify the readme so it'll be easier for people to figure it out. No need for a complex excel sheet then, just a table will be fine, let me try it.
Cheers!
by Grumpf
06 May 2021, 14:27
Forum: ESP Easy: Software
Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Replies: 7
Views: 5116

Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D

Is normal included in all the testings but not necessarily in Display or Energy or is Normal in every version ?
And testing in every Testing A-D ?
by Grumpf
06 May 2021, 14:16
Forum: ESP Easy: Software
Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Replies: 7
Views: 5116

Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D

I'm doing an excel sheet that'll list the plugins by release. Maybe it won't be too problematic to have a selection sheet where you select the plugins you want and it tells you what release you can use. If that's useful I can try to help but it'll require a check before each release so that's more w...
by Grumpf
06 May 2021, 13:20
Forum: ESP Easy: Software
Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Replies: 7
Views: 5116

Re: ESP-Easy_mega_20210503_test_A vs B vs C vs D

Perfect thank you. I think that must be included in the Readme.txt it seems this thing wasn't updated for a while.
Cheers !
by Grumpf
06 May 2021, 13:01
Forum: ESP Easy: Software
Topic: ESP-Easy_mega_20210503_test_A vs B vs C vs D
Replies: 7
Views: 5116

ESP-Easy_mega_20210503_test_A vs B vs C vs D

Hi,
I tried to look in the docs, the readme etc. bit don't seem to understand what is included in each package. Am I missing something ?
Thanks.
by Grumpf
28 Apr 2021, 20:19
Forum: ESP Easy: Hardware
Topic: ESP01S & Latest .bin
Replies: 3
Views: 6821

Re: ESP01S & Latest .bin

Thanks, it took a lot of reboot some erase and re-flash but at the end I managed to upload the latest 1MB version using the flash.cmd & esptool.exe from R120 (just renaming the bin something the batch will understand). I had some issues with many boards (all sorts) where it refuses to connect to...
by Grumpf
28 Apr 2021, 17:48
Forum: ESP Easy: Hardware
Topic: ESP01S & Latest .bin
Replies: 3
Views: 6821

ESP01S & Latest .bin

I just read too late that using ESP01S is discouraged... I was just wondering if there's something more recent than R120 that I can use, particularly as I'd gladly like to see them in the node list.
I don't need OTA and can compile if needed.

Thanks !
by Grumpf
09 Mar 2021, 15:49
Forum: ESP Easy: Software
Topic: Build feature request
Replies: 15
Views: 8095

Re: Build feature request

Burned...

It's true of course, I was more thinking about a way (and maybe you got that already and I haven't seen it yet) to propagate some setting to all the nodes like new domain name. For example, the syslog is still by IP etc.

Not really important, just something to keep in mind.
by Grumpf
09 Mar 2021, 15:05
Forum: ESP Easy: Software
Topic: Build feature request
Replies: 15
Views: 8095

Re: Build feature request

Thank you very much Grumpf for this build. Sorry it has taken so long to test this and get back to you. I'm in the middle of a IoT POC for work and converting most of my machines over to Ubuntu here in my office so my schedule has been swamped. Your build worked just fine. I have both servo control...
by Grumpf
01 Mar 2021, 14:40
Forum: ESP Easy: Software
Topic: Build feature request
Replies: 15
Views: 8095

Re: Build feature request

You can find the instructions here : https://espeasy.readthedocs.io/en/latest/Participate/ArduinoIDE.html I can also simply share my entire portable Espeasy as it's only free material. You unzip and run the main exe then specify the boards, that should work like that. Meanwhile, I added your require...
by Grumpf
28 Feb 2021, 18:10
Forum: ESP Easy: Software
Topic: Build feature request
Replies: 15
Views: 8095

Re: Build feature request

Don't thank me until it works !
I just made some tests for me and for what I need + my custom 012 LCD with special chars. Tried to upload the bin for Wemos D1 mini using the tool & OTA and both worked so I'm pleased with myself. :mrgreen:
by Grumpf
28 Feb 2021, 16:37
Forum: ESP Easy: Software
Topic: Build feature request
Replies: 15
Views: 8095

Re: Build feature request

If you can uncomment the plugins you need in this file and post it back I'll try to compile something for you. Scroll until you see the plugin section and uncomment (remove leading //) everything you use. We're talking for this one right ? wemos-d1-mini-1.jpg #ifndef ESPEASY_CUSTOM_H #define ESPEASY...
by Grumpf
27 Feb 2021, 13:44
Forum: ESP Easy: Software
Topic: Dev in mega-20210223
Replies: 2
Views: 3697

Re: Dev in mega-20210223

Thanks. I added my WOT to the thread. Hope it helps a bit with some decisions as I don't really understand fully some of the subjects...

Cheers !
by Grumpf
26 Feb 2021, 17:45
Forum: ESP Easy: Software
Topic: Dev in mega-20210223
Replies: 2
Views: 3697

Dev in mega-20210223

Hi, sorry I tried to see about the dev version in latest build and couldn't figure out. I read about the different versions in, the docs & the readme but that's sill a bit mysterious to me, may need to be updated a bit, or I miss the correct file explaining it :( Can someone help ? Thanks, Grumpf.
by Grumpf
09 Feb 2021, 19:28
Forum: ESP Easy: Projects / Applications
Topic: Matrix Display with movement detector for custom message
Replies: 5
Views: 14726

Re: Matrix Display with movement detector for custom message

Well in this case I guess I'll wait a bit and try to finish some other projects too.
Cheers !
by Grumpf
09 Feb 2021, 18:33
Forum: ESP Easy: Hardware
Topic: Need advice on espeasy switch
Replies: 3
Views: 11437

Re: Need advice on espeasy switch

Was on another projects for a while. I've bookmarked this and post as soon as I've made some progress.
Tx again.
by Grumpf
09 Feb 2021, 17:27
Forum: ESP Easy: Projects / Applications
Topic: Matrix Display with movement detector for custom message
Replies: 5
Views: 14726

Matrix Display with movement detector for custom message

CURL or Espeasy + Serial server ? I'm using the example in the MD_MAX72XX for Esp8266 to display a custom message to a 128X8 SPI matrix display. The code works and I slightly modified it with a timer and a movement detector (RCWL0516) so the leds will be off when noone is watching (to prevent light...
by Grumpf
09 Feb 2021, 16:57
Forum: ESP Easy: Hardware
Topic: Esp Easy max7219 Dot Matrix
Replies: 38
Views: 12724

Re: Esp Easy max7219 Dot Matrix

Just a post to subscribe to this topic. I'm going to ask help for a project with that as well. Cheers.

Here:

viewtopic.php?f=2&t=8322
by Grumpf
09 Feb 2021, 15:42
Forum: ESP Easy: Software
Topic: Assembling own selection of Plug-Ins — Compilation via platformio required?
Replies: 9
Views: 8072

Re: Assembling own selection of Plug-Ins — Compilation via platformio required?

PlateformIO was a bit too intimidating for me so I went the lazy road and manually added the plugins I wanted using ArduinoIDE. Here's what I've done to compile : First, create a portable version of your IDE for Espeasy https://www.arduino.cc/en/Guide/PortableIDE , it's small and allow you avoid ret...
by Grumpf
04 Feb 2021, 17:40
Forum: Introduce yourself
Topic: Hi everyone
Replies: 1
Views: 3255

Re: Hi everyone

Still in engineering or totally different field ? For a living ?
by Grumpf
28 Jan 2021, 08:08
Forum: ESP Easy: General Discussion
Topic: Connect 2 units by wire
Replies: 6
Views: 5290

Re: Connect 2 units by wire

:D You're like many of my clients: I have to play Spanish inquisition with them until they finally spit it out! We're only on the second Why, the third one should work (check here https://philsvitek.com/how-to-find-the-real-problem-by-asking-the-three-whys/) TL;DR you're not telling what you want to...
by Grumpf
26 Jan 2021, 08:47
Forum: ESP Easy: General Discussion
Topic: Connect 2 units by wire
Replies: 6
Views: 5290

Re: Connect 2 units by wire

Like Thomas said, you can try using the existing communication buses between your pi & the Esp like serial, I²C or SPI. You can find a lot of examples for Arduinos & Pi on the web. But you didn't really answer my question : I understand you want a wire between the units but why ? Unless it's...
by Grumpf
25 Jan 2021, 08:37
Forum: ESP Easy: General Discussion
Topic: Flash Problem Lolin ESP32 Board
Replies: 18
Views: 14142

Re: Flash Problem Lolin ESP32 Board

Thanks both. I knew they were slow but didn't know that the red/green ones needed full screen refresh. That'll certainly guide my choice. I want to use them for a 4 (8) capacitor moisture monitor + T°/H° But I think I've polluted this thread enough with irrelevant topics. If you want to delete those...
by Grumpf
24 Jan 2021, 20:54
Forum: ESP Easy: General Discussion
Topic: Flash Problem Lolin ESP32 Board
Replies: 18
Views: 14142

Re: Flash Problem Lolin ESP32 Board

Oh, I knew, don't worry. No weight on your shoulders here, I'm just playing with new toys. If it works with Espeasy one day, great. If not, it's ok. I got several oddballs boards just because I'm a compulsive buyer and when they finally arrive 6 years later in the mail I usually had forgotten what I...
by Grumpf
24 Jan 2021, 20:39
Forum: ESP Easy: General Discussion
Topic: Flash Problem Lolin ESP32 Board
Replies: 18
Views: 14142

Re: Flash Problem Lolin ESP32 Board

@Ath, Thanks do you know the particular e-ink display this is targeting ? @TD-er Thanks, Basically they increased security for IOT and optimized some instructions for AI-focused operations (whatever that means, your guess is as good as mine). Oh, and also very low power mode. Dual core@240 MHz BLE 5...
by Grumpf
24 Jan 2021, 17:40
Forum: ESP Easy: General Discussion
Topic: Flash Problem Lolin ESP32 Board
Replies: 18
Views: 14142

Re: Flash Problem Lolin ESP32 Board

That I didn't, but forgetting to tick the .bin I was your man ! Worked like a charm, this tool looked a bit intimidating at first but thanks to the doc it was easy. Now I can finally access latest version and look through system variables webpage. I missed the internal T° but found the touch ESP32 d...
by Grumpf
24 Jan 2021, 17:00
Forum: ESP Easy: General Discussion
Topic: Flash Problem Lolin ESP32 Board
Replies: 18
Views: 14142

Re: Flash Problem Lolin ESP32 Board

My bad. I confounded my folders, I meant R20100. Gonna look at your link, thanks.
by Grumpf
24 Jan 2021, 16:40
Forum: ESP Easy: General Discussion
Topic: Flash Problem Lolin ESP32 Board
Replies: 18
Views: 14142

Re: Flash Problem Lolin ESP32 Board

Hi everyone, sorry for necroposting here but I need some guidance. I got this Lolin D32 Pro 2021-01-24 16_38_32-Photos.jpg and it works flashed with R120. If I try the ESP.Easy.Flasher either it give me error2 or say it's ok but nothing changed. I tried using different .bin with the R120 esptool wit...
by Grumpf
24 Jan 2021, 14:55
Forum: ESP Easy: General Discussion
Topic: Connect 2 units by wire
Replies: 6
Views: 5290

Re: Connect 2 units by wire

Hi, what exactly are you trying to achieve ? If you explain your project we can try to help you better.
Cheers !
by Grumpf
16 Jan 2021, 19:53
Forum: ESP Easy: Projects / Applications
Topic: Plugin 01 (Switch ) Push Button Longpress
Replies: 4
Views: 9075

Re: Plugin 01 (Switch ) Push Button Longpress

Glad you managed, I'll try again and share my experience with you if you don't mind.
Talk to you soon,
Thanks.
by Grumpf
16 Jan 2021, 18:55
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

All right, this is what I got so far. Any advice welcome : So 2 devices, one for the motion sensor and one for a Led or just variable status. 2021-01-16 18_30_12-Thirty-two.png Device one, the sensor : 2021-01-16 18_31_08-Thirty-two.png Device two, the variable/Led 2021-01-16 18_31_29-Thirty-two.png...
by Grumpf
16 Jan 2021, 16:02
Forum: ESP Easy: Projects / Applications
Topic: Plugin 01 (Switch ) Push Button Longpress
Replies: 4
Views: 9075

Re: Plugin 01 (Switch ) Push Button Longpress

Simply don't assign any action to it.

I say that theorically, longpress or double never worked for me so far.
by Grumpf
14 Jan 2021, 19:02
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

shame.jpg
shame.jpg (72.74 KiB) Viewed 12350 times
by Grumpf
14 Jan 2021, 18:53
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

Mmm not sure :? , I changed for D5 and it triggers fine but stops after 10 seconds, even if I dance in front of it while active (fully clothed be reassured). Shouldn't it retrigger the counter to 10 every time it detects a movement ? Also, when I do that, it seems that it won't re-trigger for a cert...
by Grumpf
14 Jan 2021, 18:35
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

Will do, thanks again !
by Grumpf
14 Jan 2021, 18:02
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

I'm trying something like this : on wave#State do if [wave#state]=1 gpio,2,0 timerSet 1,10 endon on Rules#Timer=1 do gpio,2,1 endon It works but it is erratic, sometimes the led stays on longer and sometimes the sensor doesn't pick up movement for a while... Dunno why. Is it because of my device dec...
by Grumpf
14 Jan 2021, 10:30
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

Thanks a lot. The TCRT5000 can be use for waving your hand above a clock for example ?
by Grumpf
14 Jan 2021, 09:00
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

I guess I can do it this way. It'll require a bit more programming as I need Domoticz to send and on/off signal to the motion detection mechanism. I also want a radio switch to turn on the light and in this case prevent the off when no motion is detected. I'll need to research how to send a variable...
by Grumpf
13 Jan 2021, 19:36
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

Hi, thanks for the quick reaction and your advice about those ! I want to control the backlight of LCD or Led matrix to only lit when there's someone to watch. Project one is a simple 2004 LCD: wave in front of it and backlight on (I know I'd have to limit the range with a resistor but small steps)....
by Grumpf
13 Jan 2021, 15:54
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

Hi guys, thanks for the tip, those guys are awesome. Now, I googled a lot and search this forum but couldn't find a simple example of a capacitor to add for 1 or 2 or 5 minutes delay to C-. I got the (1/f)*32768 and the 2021-01-13 15_50_41-Clipboard.png But Engineer school was 30 years ago... Erm, D...
by Grumpf
30 Dec 2020, 17:39
Forum: ESP Easy: Hardware
Topic: MAX30100/30102 heartbeat and oxygenation sensor
Replies: 9
Views: 18187

Re: MAX30100/30102 heartbeat and oxygenation sensor

Indeed, still a good sign though :).
by Grumpf
30 Dec 2020, 17:20
Forum: ESP Easy: Hardware
Topic: MAX30100/30102 heartbeat and oxygenation sensor
Replies: 9
Views: 18187

Re: MAX30100/30102 heartbeat and oxygenation sensor

Placing my answer here in order to be notified. I'll be interested too.

This example works flawlessly https://create.arduino.cc/projecthub/Su ... 102-c2b4d8 and the the I²C scan of the latest espeasy finds them too.
by Grumpf
27 Dec 2020, 17:35
Forum: ESP Easy: Hardware
Topic: Need advice on espeasy switch
Replies: 3
Views: 11437

Re: Need advice on espeasy switch

Looks great Chris, I'll look over it tomorrow thanks a lot for your time !
Cheers.
by Grumpf
02 Dec 2020, 22:10
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

All right I checked comparison youtube videos and ordered some rcwl-0516. They look great. Only 3 months to wait for them to be delivered...

Thanks guys, @Ath keep me posted when your sensor arrives.

Cheers !
by Grumpf
02 Dec 2020, 19:48
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Re: Contactless wakeup for LCD

Cheap and tricky ? That'll remind me of my earliest love life. Any link or examples ?

Thanks.
by Grumpf
02 Dec 2020, 18:53
Forum: ESP Easy: Hardware
Topic: Contactless wakeup for LCD
Replies: 22
Views: 15594

Contactless wakeup for LCD

I'm wondering if someone has a better option than a PIR to trigger the display of a LCD after time out. Objective is to have a 2004 in the bedroom that can be used as a clock with some messages from domoticz. All of that works for now, the LCD goes off and as soon as the PIR detects a movement, the ...
by Grumpf
26 Nov 2020, 17:01
Forum: ESP Easy: Software
Topic: Neopixel (Basic) WS2812b do not work on wemos d1
Replies: 13
Views: 10223

Re: Neopixel (Basic) WS2812b do not work on wemos d1

Happy to help. And if you want to drive a lot of leds, don't forget the capa.
Cheers.