Search found 23 matches

by Naesstrom
31 Mar 2023, 19:09
Forum: RFlink: General Discussions
Topic: telldus In-/Outdoor Thermo-/hygrometer (313159)
Replies: 2
Views: 2522

Re: telldus In-/Outdoor Thermo-/hygrometer (313159)

I too am having this problem with these sensors, and I am too looking for a firmware with the fix. I noticed that the changelog entry from 6-1-2022 (https://www.rflink.nl/changelog.php), mentions a fix for this issue. I would very much appreciate to get access to this fixed firmware version! yeah I...
by Naesstrom
26 Oct 2022, 20:57
Forum: RFlink: General Discussions
Topic: telldus In-/Outdoor Thermo-/hygrometer (313159)
Replies: 2
Views: 2522

telldus In-/Outdoor Thermo-/hygrometer (313159)

I'm running RFlink 48 on a mega connected to Home-assistant and it's been working beautifully! Today I bought a telldus In-/Outdoor Thermo-/hygrometer (313159) to monitor my freezer temperature but it's showing the wrong values. unnamed (4).png The log shows the same problem: 2021-12-17 21:10:00 DEB...
by Naesstrom
03 Nov 2018, 18:39
Forum: ESP Easy: Hardware
Topic: Pulse Counter
Replies: 31
Views: 44119

Re: Pulse Counter

grovkillen wrote: 03 Nov 2018, 17:07 Here's my 1 year old config that is still running. You may use it as inspiration: https://testoftimes.com/2017/11/25/moni ... g-esp8266/
Sweet thanks, I can't see a difference between kWh and kWh (time)?
by Naesstrom
03 Nov 2018, 14:29
Forum: ESP Easy: Hardware
Topic: Pulse Counter
Replies: 31
Views: 44119

Re: Pulse Counter

I'm planning on attaching a ESP to my S0 interface to and the connections seems clear... but could anyone share some info on what rules/calculations to use based on the imp/kwh on the reader? How often should the ESP send the value etc? I'm not using domoticz but home-assistant so I don't have your ...
by Naesstrom
24 Oct 2018, 21:39
Forum: ESP Easy: General Discussion
Topic: Freezer alarm with buzzer!
Replies: 4
Views: 3850

Re: Freezer alarm with buzzer!

Actually I tried my first try of the code and it worked super... set it to this: on FRYS#Temperature do if [FRYS#Temperature] > 30 // temp warmer then -15ºC tone,14,1000,700 endif endon And when warming it up over 30 it starts beeping and when it cools down it stops! Just as I wanted it! :D hmm... m...
by Naesstrom
24 Oct 2018, 21:26
Forum: ESP Easy: General Discussion
Topic: Freezer alarm with buzzer!
Replies: 4
Views: 3850

Re: Freezer alarm with buzzer!

Rtttl is another command but it will block the loop during the playing. But to stop it after a while you need to use timer and possibly dummy devices to store the state (creating a kind of hysteresis). Yeah I was thinking of making it play the imperial march but since it's going to be at my office ...
by Naesstrom
24 Oct 2018, 20:24
Forum: ESP Easy: General Discussion
Topic: Freezer alarm with buzzer!
Replies: 4
Views: 3850

Freezer alarm with buzzer!

This might be a stupid question but I'm building a freezer alarm with a wemos d1 mini and a buzzer shield, I'm getting the temp from 2 ds18b20's... I've never written a rule before but after some reading I've come up with the following on temp#Temperature do if [temp#Temperature] > -15 // temp warme...
by Naesstrom
24 Sep 2018, 21:20
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95441

Re: Giveaway! 20pcs of programmers

Got mine today to... now just to figure out how to use it! :D
by Naesstrom
21 Sep 2018, 13:07
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95441

Re: Giveaway! 20pcs of programmers

Can you explain more about these nodes? Perhaps better suited in a different thread. I would like to know more about the movement detection as that is something I didn't get working after many tries with various sensors. I'm just redoing them and adding a oled for displaying temperature but I'm tak...
by Naesstrom
17 Sep 2018, 08:35
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95441

Re: Giveaway! 20pcs of programmers

WOOHOO! Awsome!
by Naesstrom
15 Sep 2018, 20:00
Forum: Staff Announcements forum
Topic: Giveaway! 20pcs of programmers
Replies: 53
Views: 95441

Re: Giveaway! 20pcs of programmers

Oh where should I start... I have one set up in the greenhouse monitoring temp and humidity, it's also connected to a 4-channel relay that controlls all my irrigation in the summer... really sweet setup. (it's the left box) https://i.imgur.com/8XN0Yxp.jpg I also have 5 "nodes" as I call th...
by Naesstrom
03 Sep 2018, 21:40
Forum: ESP Easy: General Discussion
Topic: 128x64 0.96" Oled line height
Replies: 1
Views: 1936

128x64 0.96" Oled line height

I want to add a small OLED display to my room sensors to increase the WAF. I have a spare 0.96" oled that I'm thinking of connecting but all the images I have seen it uses all the available 8 rows... Since I only want to show temperature and humidity all I need is 2 rows, can I shange the row h...
by Naesstrom
13 Jul 2018, 23:59
Forum: ESP Easy: Hardware
Topic: AD2000-M RFID Keypad to ESPEasy?
Replies: 9
Views: 6602

Re: AD2000-M RFID Keypad to ESPEasy?

Thanks @Grovkillen! Ran into another problem tonight tough, it randomly thinks my doorbell is pressed and then my speakers starts shouting "there's someone at the door"... Is it possible with rules to make some kind of "de bounce" filter, ie. button has to be pressed for 20ms bef...
by Naesstrom
13 Jul 2018, 16:09
Forum: ESP Easy: Hardware
Topic: AD2000-M RFID Keypad to ESPEasy?
Replies: 9
Views: 6602

Re: AD2000-M RFID Keypad to ESPEasy?

grovkillen wrote: 13 Jul 2018, 16:06 You need common ground for the logics to work.
they do share that through the powershield tough?
by Naesstrom
13 Jul 2018, 16:05
Forum: ESP Easy: Hardware
Topic: AD2000-M RFID Keypad to ESPEasy?
Replies: 9
Views: 6602

Re: AD2000-M RFID Keypad to ESPEasy?

yeah I measured the RX/TX ports and they were really fine, I should be able to just skip the gnd and 5V pins on the keypad? it's powered by 12V from my shield and so is the nano oh and should I use the rx/tx pins on the wemos or some other D pins and select them in the device options? Just noticed t...
by Naesstrom
13 Jul 2018, 14:48
Forum: ESP Easy: Hardware
Topic: AD2000-M RFID Keypad to ESPEasy?
Replies: 9
Views: 6602

AD2000-M RFID Keypad to ESPEasy?

So I have a AD2000-M'ish RFID keypad connected outside my door, on the inside I have a setup that looks like this: DSC_0115 (1).JPG The relay controlls a magnetic lock, I also have a switch setup so that if somone presses the doorbell I get a mqtt message and an announce in the speakers that someone...
by Naesstrom
08 Jul 2018, 00:57
Forum: ESP Easy: Software
Topic: Plugin for RFID Reader RDM6300
Replies: 15
Views: 15974

Re: Plugin for RFID Reader RDM6300

Is this now included in the latest normals?
by Naesstrom
05 Mar 2018, 18:31
Forum: ESP Easy: Software
Topic: IVT/NIBE Heatpumps?
Replies: 0
Views: 2240

IVT/NIBE Heatpumps?

Hi I recently found a site www.husdata.se that sells parts to watch and integrate heatpumps, I was happy to see that they even sell a dedicated communications board that you are supposed to attach to a PI and that sends the values over mqtt to your broker. Feels a bit overpowered to use a PI for tha...
by Naesstrom
07 Feb 2018, 07:23
Forum: ESP Easy: Hardware
Topic: Connecting a Rain Gauge
Replies: 14
Views: 15898

Re: Connecting a Rain Gauge

Thanks @budman1758 I'll go with that formula instead! It's not inches but mm btw, so it would compare to 0.011" :D Using node-red to parse the data and send it off to influxdb for storing and then Grafana to show it! This is how it looked last night when playing around with it! https://snapshot...
by Naesstrom
06 Feb 2018, 20:08
Forum: ESP Easy: Hardware
Topic: Connecting a Rain Gauge
Replies: 14
Views: 15898

Re: Connecting a Rain Gauge

Thanks, and yes, seems to kind of work when I subbed to my mqtt
Image

I'll try and up the delay to 60s so that it doesn't spam my server every second tough. Still, would be great to know what the different "Counter Types" does!
by Naesstrom
06 Feb 2018, 19:54
Forum: ESP Easy: Hardware
Topic: Connecting a Rain Gauge
Replies: 14
Views: 15898

Connecting a Rain Gauge

So I bought one of those really cheap rain gauges with a tipping bucket that looks like image just below, connected one wire to ground and the other to D5 on my nodemcu board but would love to get some help on the config since I can't get it working and an inch from going completely mad here... :D T...
by Naesstrom
02 Jun 2017, 22:37
Forum: ESP Easy: General Discussion
Topic: [SOLVED] Problem with 16x2 display, no text?
Replies: 2
Views: 3084

Re: Problem with 16x2 display, no text?

If you don't even see the "ESP EASY" message at boot - did you try to adjust the contrast potentiometer? (The blue cube with the white screw driver slot on the display interface board) Turn it until you see white rectangles and then a bit back. Regards Shardan Oh my godness, now I feel re...
by Naesstrom
02 Jun 2017, 21:22
Forum: ESP Easy: General Discussion
Topic: [SOLVED] Problem with 16x2 display, no text?
Replies: 2
Views: 3084

[SOLVED] Problem with 16x2 display, no text?

Hi I'm trying to setup espeasy to use as a controller for my smart greenhouse and have connected it like this: http://i.imgur.com/exc8DUY.png The screen lights up but I'm not getting any text on it... ESPEasy seems to find it since it shows up in the I2C scan: http://i.imgur.com/uE09fQo.png And I ha...