Search found 26 matches
- 15 Feb 2017, 13:40
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 735011
Re: New ESP gadget
Same problem here. I have 4 Sonoff with esp easy running on them. They tend to be quite unreliable. webinterface not loading or really slow to load, plug not responding to http command sent from domoticz, ... I tried different versions of esp easy, but I think it s hardware related and not software ...
- 08 Feb 2017, 14:30
- Forum: ESP Easy: Software
- Topic: Unreliable config page and SendTo connectivity
- Replies: 21
- Views: 19140
Re: Unreliable config page and SendTo connectivity
I have 4 sonoff and I find them very unreliable. I tested various version of ESP Easy on them, but the Sonoff are always slow and seem to drop out of the network regularly despite being in a place with excellent wifi coverage. I reached a point where I consider them less reliable than the standard K...
- 07 Nov 2016, 14:49
- Forum: ESP Easy: Hardware
- Topic: Interest for esp8266 sensor hardware?
- Replies: 33
- Views: 25769
Re: Interest for esp8266 sensor hardware?
In terms of casing, I found that the idea used here :
http://www.nodeusb.com/
is quite nice as you can just add sensors via a simple connection and it s easy to plug in a charger to have power. The casing is not the prettiest but that can be improved on i guess
http://www.nodeusb.com/
is quite nice as you can just add sensors via a simple connection and it s easy to plug in a charger to have power. The casing is not the prettiest but that can be improved on i guess
- 01 Nov 2016, 21:52
- Forum: ESP Easy: Software
- Topic: Rules, syntax in if ...
- Replies: 3
- Views: 8122
Re: Rules, syntax in if ...
Yes actually the rules I posted before is not good as sometimes the lights start flashing due to a timing conflict in the two rules and the command sent from my central controller. I now use the solution posted there : http://www.letscontrolit.com/forum/viewtopic.php?f=2&t=1867&p=8627&hi...
- 01 Nov 2016, 21:07
- Forum: ESP Easy: General Discussion
- Topic: Control of the relay when clicking the button (without network)
- Replies: 11
- Views: 12341
Re: Control of the relay when clicking the button (without network)
If I understand well what you're trying to do, you need to set up a rule as detailed in this post:
viewtopic.php?f=2&t=1867&p=8627&hilit=s ... ules#p8627
viewtopic.php?f=2&t=1867&p=8627&hilit=s ... ules#p8627
- 01 Nov 2016, 21:04
- Forum: ESP Easy: Hardware
- Topic: Interest for esp8266 sensor hardware?
- Replies: 33
- Views: 25769
Re: Interest for esp8266 sensor hardware?
Hello, I think it can be a good idea as, for me, the main drawbacks of homemade system based on ESP are the lack of casing and the necessity to have a power supply. The main issue will be pricing I think. Most of the people on this kind of forum are happy to DIY their own sensors or to buy cheap ITE...
- 25 Oct 2016, 22:12
- Forum: ESP Easy: Software
- Topic: Toggle Relay with Rules?
- Replies: 16
- Views: 35677
Re: Toggle Relay with Rules?
I've got the same problem and would also be interested to reduce this lag as it means that people tend to push the button several times in a row thinking the first time didn' t work and then lights starts flashing ... not ideal.
- 28 Sep 2016, 22:29
- Forum: ESP Easy: Software
- Topic: Rules, syntax in if ...
- Replies: 3
- Views: 8122
Re: Rules, syntax in if ...
Hi This is discussed in a couple of places in the forum with different solution proposed. In my case I use the following rule: on MainSwitch#Switch do if [MainSwitch#Switch]=0 gpio,12,0 else gpio,12,1 endif endon on Relay#Relay do if [Relay#Relay]=0 gpio,13,1 else gpio,13,0 endif endon With the foll...
- 21 Sep 2016, 23:12
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 735011
Re: New ESP gadget
Ok, I've tested some more tonight and on a second Sonoff with R108 and R120 I have no problem. Seems stable (been reloading the log files page in loop for the last 15 minutes). I have also tried R108 on my first Sonoff but it is still not stable. It seems that the problem comes from my Sonoff device...
- 21 Sep 2016, 14:45
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 735011
Re: New ESP gadget
Good to know that it's more stable with R109. Might try that one too.
thanks
thanks
- 21 Sep 2016, 07:38
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 735011
Re: New ESP gadget
I have a 5 pins version with R120 from the website. Not using UDP or anything special. I've tried disabling the logs but doesn't seem to help much. I've tested some more and I am loosing commands too so it seems to be the sonoff loosing wifi connection, but I am in a spot where wifi coverage is very...
- 20 Sep 2016, 22:00
- Forum: ESP Easy: Hardware
- Topic: New ESP gadget
- Replies: 326
- Views: 735011
Re: New ESP gadget
I'm having the same issue here. The sonoff does not display the webpage 9 times out of 10 (tried chrome and IE and both have the problem). It does not seem to be a network problem since when I press the physical button on the Sonoff, Domoticz is updated in real time with the on/off status change des...
- 05 Feb 2016, 11:00
- Forum: ESP Easy: Hardware
- Topic: pulse counter with CNY70
- Replies: 25
- Views: 34039
Re: pulse counter with CNY70
Hello, I would be interested to know what kind of accuracy you get with this setup. I have a pulse counter based on TCRT5000 a bit like detailed here (but using ESPEasy): https://www.mysensors.org/build/pulse_water . I am really struggling for the last month or so to get something accurate out of th...
- 27 Jan 2016, 20:39
- Forum: ESP Easy: Projects / Applications
- Topic: Gas and water meter pulse counter
- Replies: 8
- Views: 11885
Re: Gas and water meter pulse counter
I m not using a reed sensor at the moment I am using an infrared proximity sensor which I am planning to change for a reed sensor hoping to have a better accuracy. I haven't had the time to look at this for the moment but thanks for the info concerning your sensor.
- 22 Jan 2016, 15:04
- Forum: ESP Easy: Projects / Applications
- Topic: Gas and water meter pulse counter
- Replies: 8
- Views: 11885
Re: Gas and water meter pulse counter
Thanks for your replies. On my gas meter I change the debounce to 2000 and now I get around 3% error rate (not great but acceptable compared to the 30% error I had at 1000). On my water meter I have completely useless readings still unfortunatelly despite trying different debounce value. I am thinki...
- 04 Jan 2016, 21:51
- Forum: ESP Easy: Projects / Applications
- Topic: Gas and water meter pulse counter
- Replies: 8
- Views: 11885
Gas and water meter pulse counter
Hello, I have recently connected an ESP running ESPEasy to a couple of TCR5000 pulse counter. The problem I have is that the counting is not very reliable. Sometimes I get 2 pulses per turn sometimes 1 pulse only. I have several questions : 1. What is the expected behaviour ? 1 pulse at start of det...
- 25 Nov 2015, 09:58
- Forum: ESP Easy: Projects / Applications
- Topic: Water heating panel /Ds18b20 Temp
- Replies: 12
- Views: 13533
Re: Water heating panel /Ds18b20 Temp
Thanks to both of you for the links.
- 24 Nov 2015, 22:38
- Forum: ESP Easy: Projects / Applications
- Topic: Water heating panel /Ds18b20 Temp
- Replies: 12
- Views: 13533
Re: Water heating panel /Ds18b20 Temp
Really nice :) I'm working on something similar for my underfloor heating (and am planning to use the output of the sensors to start/stop my circulation pumps). I am planning to use a node MCU dev kit to avoid having to do my own PCB. Where did you find the plastic casing ? It looks good and I canno...
- 14 Nov 2015, 21:39
- Forum: ESP Easy: Hardware
- Topic: NAN when reading DS18b20
- Replies: 13
- Views: 16964
Re: NAN when reading DS18b20
... not the wires then. I don't know if you screen capture is old or not but if you took it tonight I am astonished that the date for last seen is at 3 pm this afternoon. If the screen capture was done tonight it should say it s seen more recently than that. Maybe check the adress and port you've pu...
- 14 Nov 2015, 21:33
- Forum: ESP Easy: Software
- Topic: Problem with Arduino IDE 1.6.6 ?
- Replies: 12
- Views: 10732
Re: Problem with Arduino IDE 1.6.6 ?
Hello, Actually I used the .zip file available on sourceforge not the one from github as I couldn' t find the libraries in the github repo either (I guess they are separate project with their own repo). The sourceforge link is given in the wiki page: http://www.esp8266.nu/index.php/Tutorial_Arduino_...
- 14 Nov 2015, 21:00
- Forum: ESP Easy: Hardware
- Topic: NAN when reading DS18b20
- Replies: 13
- Views: 16964
Re: NAN when reading DS18b20
I confirm what I was saying in my previous post. I had a bad connection on my breadboard. After re-wiring everything cleanly I have normal reading nows and the curve which was a flat 0 in domoticz is now at the expected temperature value :) Thanks again to all for your help. davidoliveirapt, I would...
- 14 Nov 2015, 20:40
- Forum: ESP Easy: Hardware
- Topic: NAN when reading DS18b20
- Replies: 13
- Views: 16964
Re: NAN when reading DS18b20
Thanks a lot for the detailed answer Paco, it helped me solve my NaN problem. Concerning the 0 degree in domoticz, do you have none zero reading in the device inteface when you connect to your ESP via ESPeasy interface ? Or is it also at 0 there. If yes then it s normal domoticz diplsays 0 I think. ...
- 13 Nov 2015, 23:15
- Forum: ESP Easy: Hardware
- Topic: NAN when reading DS18b20
- Replies: 13
- Views: 16964
Re: NAN when reading DS18b20
Hello,
I have the same problem, but I have only 1 ESP board for the moment so cannot try changing the board to see if it solves it like you did.
Have you found a way to read the value on the first board without having NaN ?
I have a 10k pull up resistor linked to 5V input and to GPIO 2
I have the same problem, but I have only 1 ESP board for the moment so cannot try changing the board to see if it solves it like you did.
Have you found a way to read the value on the first board without having NaN ?
I have a 10k pull up resistor linked to 5V input and to GPIO 2
- 12 Nov 2015, 21:03
- Forum: ESP Easy: Software
- Topic: Problem with Arduino IDE 1.6.6 ?
- Replies: 12
- Views: 10732
Re: Problem with Arduino IDE 1.6.6 ?
ok I found the problem thanks to your indication. I didn' t realise that I had a copy of the arduino library in mydocuments on top of the one in my program file folder (I m under windows). I had the libraries in both places but one of them must have been not up to date or not copied properly as when...
- 12 Nov 2015, 15:26
- Forum: ESP Easy: Software
- Topic: Problem with Arduino IDE 1.6.6 ?
- Replies: 12
- Views: 10732
Re: Problem with Arduino IDE 1.6.6 ?
Hello, Thanks for the reply. I've installed version 1.6.5 to check if it helps. I have less errors now, but I still have the one concerning the PubSubClient MQTTclient("") call. I have copied the libraries as detailed in the wiki page and it seems that they are detected ok because the erro...
- 11 Nov 2015, 23:35
- Forum: ESP Easy: Software
- Topic: Problem with Arduino IDE 1.6.6 ?
- Replies: 12
- Views: 10732
Problem with Arduino IDE 1.6.6 ?
Hello all, I've just discovered this project and it sounds great. Thanks a lot to the developpers :) I wanted to give it a try tonight but have been unable to compile the code (tried R20 and R39). I have the Arduino IDE 1.6.6 instead of the advised 1.6.5. Could it come from there ? I get several err...