Search found 8 matches

by tony_wk
13 Sep 2017, 08:39
Forum: ESP Easy: General Discussion
Topic: Sonoff enable relay GPIO12 boot state to high but it turns off after 2 seconds automattically
Replies: 4
Views: 3661

Re: Sonoff enable relay GPIO12 boot state to high but it turns off after 2 seconds automattically

Thanks for the quick reply. I think the Sonoff unit has hardwired the relay to GPIO12 correct? So I can't use GPIO13,14 for its built in relay. IO extension board is not an option as I need to squeeze Sonoff into my wall switch concrete hole and no much room left. Is it possible to make some Sonoff ...
by tony_wk
13 Sep 2017, 07:52
Forum: ESP Easy: General Discussion
Topic: Sonoff enable relay GPIO12 boot state to high but it turns off after 2 seconds automattically
Replies: 4
Views: 3661

Sonoff enable relay GPIO12 boot state to high but it turns off after 2 seconds automattically

I flashed the Sonoff basic with R200 dev firmware and work with domoticz to control a light. I want to power on the Sonoff and the light is on. When I enable relay GPIO12 boot state to high, every time I power on it, the light turns on for 2 seconds then automatically turns itself off. I was suspici...
by tony_wk
20 Jul 2017, 15:32
Forum: ESP Easy: General Discussion
Topic: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
Replies: 10
Views: 9358

Re: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle

Good to hear that it is working. Maybe it will also be solved for you when you turn on send boot state for the relay? The rules I've posted came from a sonoff touch, but I thought it should be the same, also (touch) button and relay. Other thoughts: when you send to controller on both devices, you ...
by tony_wk
18 Jul 2017, 15:58
Forum: ESP Easy: General Discussion
Topic: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
Replies: 10
Views: 9358

Re: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle

I flashed both Sonoff RF and Sonoff S22(same Sonoff basic but with a thermo/humidity detector jack), flashed ESPeasy 2.0.0 dev10, dev 1024 version. Whenever power on the unit, if I press the button, the relay click on and off endlessly. If I press the button for long time, the on/off stops and ever...
by tony_wk
18 Jul 2017, 07:58
Forum: ESP Easy: General Discussion
Topic: Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle
Replies: 10
Views: 9358

Power on Sonoff ESPeasy and 1st button push, go into endless relay on/off cycle

I flashed both Sonoff RF and Sonoff S22(same Sonoff basic but with a thermo/humidity detector jack), flashed ESPeasy 2.0.0 dev10, dev 1024 version. Whenever power on the unit, if I press the button, the relay click on and off endlessly. If I press the button for long time, the on/off stops and every...
by tony_wk
28 Jun 2017, 08:59
Forum: ESP Easy: Hardware
Topic: EspEasy support Sonoff RF with 433MHZ control?
Replies: 11
Views: 17519

Re: EspEasy support Sonoff RF with 433MHZ control?

Thanks Aliki,this is what I want!
by tony_wk
27 Jun 2017, 05:49
Forum: ESP Easy: Hardware
Topic: EspEasy support Sonoff RF with 433MHZ control?
Replies: 11
Views: 17519

Re: EspEasy support Sonoff RF with 433MHZ control?

Thanks for the feedback.
one more question: how to setup Button switch with which GPIO? I know if it is Sonoff basic, Button is set to GPIO0, but with this RF board, I don't know which GPIO the RF board is connected.

Tony
by tony_wk
26 Jun 2017, 05:09
Forum: ESP Easy: Hardware
Topic: EspEasy support Sonoff RF with 433MHZ control?
Replies: 11
Views: 17519

EspEasy support Sonoff RF with 433MHZ control?

I bought a Sonoff RF. It is handy to have the built in RF control function. I wonder if by flashing EspEasy firmware, it can still support the RF control and setup as original way? If yes, it is good to know whether and how the RF control result can also be updated to Domoticz.

Thanks
Tony