Morning all, Some time ago, I flashed EasyEsp on to two Sonoff devices - an S20 socket and a TH16 thermal relay doodah... All worked fine at the time - flashing went ok, and I know I could access the admin of each of them. Of course, connected via the "own-wifi", then setup with my main wi...

W00t! :) Got it working - on the wifi and I'm about to start the set up process... FOr others who may find it of use, few things that through me: 1. To get into boot loader mode (flash mode), hoeld won the first button on the Sonoff 4 ch... with the lid of the case off, you should find this is marke...

Thanks Manjh, So, hold down the first button (marked fw/io01) then power the sonoff, then release the button...? How does the Sonoff show its in flash mode, lit LEDs etc? When I did that with mine, it didn't show any LEDs or sign of life period. I have since paired and tested with the OEM app, so at...

thanks manjh home now, got the sonoff and the programmer connected as you suugest - runnng off the mains. power to the sonoff is stable. I was hoping it would just be a case of "holding down the first button", then appying power to the sonoff to get in to boot flash mode... Howver, if i do...

Thanks Manjh

One last...

When you say "no crossing on this device", does that mean

A) the device doesnt cross tx to Rx, so I'll need to
Or
B) the device does cross, so I don't need to?

So Rx to Rx, tx to tx?

Thanks Manjh , I know it's easy to "ignore the dumb noob" when you guys are all at such a higher level :) Much appreciate your help, I'll give that a try tonight. Apart from "generally not poking things with a screw driver" when connected to the mains, and specific non no's? From...

More specifically, my issue is: On his modd'ed programmer in that tutorial, he's got 3 pins - 1 VCC, 1 3.3v, 1 ground. On my programmer, I have two pins - Vcc and ground. Looking at his programmer / voltage reg, he's got the first two legs of the voltage reg going to VCC and 3.3, but then using a ju...

Evening all, Work in IT and pretty au fait with Raspberry Pi stuff (so vaguely intelligent, I like to think! ;) ) My new Sonoff 4 channel switch is my first project trying to flash EasyESP. I've flashed stuff before, but I cant work out how to give the Sonoff enough power to boot? I saw one video wh...