Hello, Thanks for the quick response. The unit has a label with some numbers: h07s14 22018231 001782 2245 7766E0 The Id in the divece setting has to be only numbers. Letters are not allowed. The only number 001782 does not change the logging. Do I need an other version of the bin file? I have the la...

Hello I have an Orcon venting unit with a remote that uses 868Mz. I have een wemos von Enri (https://enri.nl/pcb/?page=itho) The unit works partly: 30495940: ITHO: Received from ID: 48,0,e9 ; raw cmd: 0 30498730: ITHO: Received from ID: 82,4,72 ; raw cmd: 0 30500715: ITHO: Received from ID: 61,42,d0...

Hi, I have used 8266 units in combination with a pulscouter to measure power consumption. This has always worked with help of a risistor. Now I am trying to do the same with a esp32 dev unit, one with external antenne, to get beter reach over a distance. I used gipo 33-34-35. I get pulses but far to...

Hello, There are some instuments to use with a washing machine to fill the washine with warm water. This saves because electrical heating is far more expensieve than with a HR heater. These instrument are over €200,- so i build one myself. I use a 3 way motorised valve, which is controlled by a ESP ...

That last remark raised another question.
I have already a power meter with 1000imp/kWh . when I as another with 2000imp/kWh it will show a double value.
Can espeasy the calculation option be use for counters?
Regards
Har

Thanks
Thats great to hear it works with 3,3 Volt.

regards
Har

Thanks for the answer. I left the idea and change to a http://www.ebay.de/itm/111871746810 (XTM18SA series energy meters) With this I can use a Pulse counter. There a have 2 options: 1) Use a pulse counter with LDR. 2) The measuring unit can give pulse if connected to a 5V line. That would be the ni...

Hello,

I have a CT for measuring current, type SCT013, voltage output type.

And I was wondering if the analoge input of the ESP can be used for this purpose?

And if yes what is the best way?
regards
Har

Hello. I have some 8266 units up and running very stable. One unit is used to monitor the electric power. In Domoticz you can use a counter or usage (electrical) In the counter option the chart is displayed every hour, in usage every 5 minutes. My question is it possible to user the pulse counter tw...

Hello,
I got the same sensor working in combination with a Ampy 5177c power meter.

I have the data in Domoticz . Only the chart is displayed in points every hour. All other charts are displayed with an interval of 5 min.

Is this a setting in the esp8266 or Domoticz?

Kind regards,
Har

I update the firmware with https://github.com/ESP8266nu/ESPEasy/bl ... LS2561.ino

and now it works with the sensor for more than a week without interuption

Hello, Thanks for the information. It works now prefect With regard to the TSL2561 I have another question: Can it be used as Pulse Counter for pa the Ampy powermeter. This gives led pulses to indicate the power consumption or do I have to use another sensor. I presume that the sensor mentioned as p...

Hello I am using some 8266 v12e units in combination with domoticz. on one unit I have a DHT 22 unit and on another the TSL2561 light-measuring unit. Both work but the 2561 stops working when the Lux value is zero. The unit can not be found in the WiFi network. Only a power off-on resets the unit. W...

Hi, Just become a Member on this Forum. My name is Har and live in the Netherlands. My main hobby concerns Philips audio from the 80's And recently started some work with the Raspberry My first was an application to open and close some window blinds. Ther I used extra Software: piPs (pi power) Now I...