Oh,i found it: one pin was assigned twice (for the ultrasonic and the relais)
Now it works, sorry
Search found 8 matches
- 14 Nov 2018, 05:54
- Forum: ESP Easy: Hardware
- Topic: Relais plus HCS04
- Replies: 2
- Views: 2299
- 12 Nov 2018, 21:48
- Forum: ESP Easy: Hardware
- Topic: Relais plus HCS04
- Replies: 2
- Views: 2299
Relais plus HCS04
Hello
I have connected a 5v Relais plus a HCS04 ultrasonic sensor on a Wemos. Anytime the US Sensor is connected i cant Control the Relais anymore.
Does someone has a workaround or hint?
Thx
Ole
I have connected a 5v Relais plus a HCS04 ultrasonic sensor on a Wemos. Anytime the US Sensor is connected i cant Control the Relais anymore.
Does someone has a workaround or hint?
Thx
Ole
- 13 Nov 2017, 22:35
- Forum: ESP Easy: Software
- Topic: temperatur control loop does not work
- Replies: 2
- Views: 2437
Re: temperatur control loop does not work
Thx !
...the missing 'do'
...the missing 'do'
- 13 Nov 2017, 21:35
- Forum: ESP Easy: Software
- Topic: temperatur control loop does not work
- Replies: 2
- Views: 2437
temperatur control loop does not work
Hello i want to control the temperatur with a simple 2-state control (on/off). My rules does not work and i don't know why. Does anyone see an error in my rule? Also if i test the relais with the gpio command they are inverted: 1 -> Off and 0 ->On (but this is a minor problem) on DS18#Temperature if...
- 03 Nov 2017, 22:41
- Forum: ESP Easy: Hardware
- Topic: Rotary Switch doesn‘t count
- Replies: 6
- Views: 4149
Re: Rotary Switch doesn‘t count
i tried this first - no success
- 03 Nov 2017, 22:33
- Forum: ESP Easy: Hardware
- Topic: Rotary Switch doesn‘t count
- Replies: 6
- Views: 4149
Re: Rotary Switch doesn‘t count
such a type
- 03 Nov 2017, 22:20
- Forum: ESP Easy: Hardware
- Topic: Rotary Switch doesn‘t count
- Replies: 6
- Views: 4149
Re: Rotary Switch doesn‘t count
ok . yes i did a reboot
- 03 Nov 2017, 21:46
- Forum: ESP Easy: Hardware
- Topic: Rotary Switch doesn‘t count
- Replies: 6
- Views: 4149
Rotary Switch doesn‘t count
Hello I have a problem with the rotary switch:it does not count ! I have connected the two outer pins of the switch (Not a shield with pwr and gnd) to the gpio‘s,configured them ...but no counting at all. Do i have to connect the pins via a resistier to Vcc? Thx if someone has a hint or workaround ....