Search found 10 matches
- 14 Jan 2019, 21:44
- Forum: ESP Easy: Software
- Topic: Sysinfo, combined with domoticz gives to many variables.
- Replies: 2
- Views: 2395
Re: Sysinfo, combined with domoticz gives to many variables.
Thank you very much for the response! I think I wasn't awake with troubleshooting, because when I tried to acces the log I didn's saw the kind of output you sended. The reason: my Domoticz controller was configured, but not enabled. Now I've enabled the Domoticz, and am able to see the logging as yo...
- 09 Jan 2019, 22:10
- Forum: ESP Easy: Software
- Topic: Sysinfo, combined with domoticz gives to many variables.
- Replies: 2
- Views: 2395
Sysinfo, combined with domoticz gives to many variables.
I think my question is even not worth a topic, but I'll give it a try. At the moment I'm using a few nodes with ESP easy Mega (GIT version: v2.0.0-dev12), wich is great, but had a bug, after 49 days that for 'updates' (see: https://github.com/letscontrolit/ESPEasy/issues/594). I have a nice Sysinfo ...
- 09 Oct 2018, 23:04
- Forum: ESP Easy: General Discussion
- Topic: Relay (high/low level trigger)
- Replies: 2
- Views: 4426
Relay (high/low level trigger)
I bought a High/Low level trigger, don't know why anymore, but it's driving me nuts that I can't get it working. My setup 1. Hardware = Wemos D1 Mini (powered by a micro usb cable and a decent power supply) 2. 4 relays module (hi / low level trigger) My 5v and ground is connected to the Relays board...
- 13 Feb 2018, 20:07
- Forum: ESP Easy: Projects / Applications
- Topic: Infrared sender & receiver
- Replies: 0
- Views: 2639
Infrared sender & receiver
I'm working on a solution to turn on my TV via my domoticz system (via RFxcom 433 hz transmitter, and 433 hz receiver relays) and that works perfectly. The next step in my home automation is to automaticaly turn on my stereo, without using any remotes. I've spend to much time to try and figure it ou...
- 25 Jan 2018, 19:56
- Forum: ESP Easy: Projects / Applications
- Topic: Control LED strip by PIR sensor (with timer function?)
- Replies: 4
- Views: 13085
Re: Control LED strip by PIR sensor (with timer function?)
Thank you very much for your help! I'm not a hardcore programmer, so it's all quite difficult for me, sorry for that! I tried to setup the rule with the same rule as you said above, and I see in the logging the following: https://i.imgur.com/wjNM8j4.png I see that the event is triggered, but I don't...
- 22 Jan 2018, 16:23
- Forum: ESP Easy: Projects / Applications
- Topic: Control LED strip by PIR sensor (with timer function?)
- Replies: 4
- Views: 13085
Control LED strip by PIR sensor (with timer function?)
I'm busy with an ESP easy project in my bathroom. I have a small LED strip (powered by GPIO 5, 3.3 volt from the NodeMCU). I want the following result: If the PIR sensor is positive, I want to have the LED strip lit-up for 1 or 2 minutes. I use a PIR sensor without delay on it (self-delay is 2 secon...
- 06 Jan 2018, 20:35
- Forum: ESP Easy: Projects / Applications
- Topic: Jonisk smart light (with ESP Easy and LED WS2812B 5050 RGB LED Strip light)
- Replies: 4
- Views: 6383
Re: Jonisk smart light (with ESP Easy and LED WS2812B 5050 RGB LED Strip light)
I connected the green cable (Din) GPIO pin to GPIO-0 (D3). The LED strip is GND connected to GND on NODEMCU and 5V to 5V. Be aware that you connect it well, and don't connect to the green cable to the wrong. I think I blew up one of my nodemcu's when the ground wasn't connected anymore and I think t...
- 28 Dec 2017, 22:22
- Forum: ESP Easy: Projects / Applications
- Topic: Jonisk smart light (with ESP Easy and LED WS2812B 5050 RGB LED Strip light)
- Replies: 4
- Views: 6383
Re: Jonisk smart light (with ESP Easy and LED WS2812B 5050 RGB LED Strip light)
Thanks for the suggestion! It worked out when I added a device, Neopixel basic, and enabled it, in stead of Neopixel Candle. I finally made it, still not the full implementation in Domoticz, but it's a start, and controllable via http request, http://myipadress/ control?cmd=neopixelall,255,100,0 for...
- 27 Dec 2017, 14:03
- Forum: ESP Easy: Projects / Applications
- Topic: Jonisk smart light (with ESP Easy and LED WS2812B 5050 RGB LED Strip light)
- Replies: 4
- Views: 6383
Jonisk smart light (with ESP Easy and LED WS2812B 5050 RGB LED Strip light)
I'm busy with a new project, a smart Jonisk light. The cheapest way to make the light smart is to insert a E27 Philips Hue colour light, but of course it's cheaper and more interesting to 'hack' it with a custom made solution. I have a NodeMCU 0.9 and a WS2812B LED strip ( https://www.ebay.com/itm/W...
- 25 Nov 2017, 20:13
- Forum: Introduce yourself
- Topic: Hi all!
- Replies: 0
- Views: 2289
Hi all!
Beste mensen, or should I say: dear people! Since a few month's I'm a getting more and more enthousiastic about home automation! It all started with a Raspberry Pi with Domoticz and RFXCOM, and now I'm trying to add some ESP8266 modules with ESP easy, to be more flexible in the places where I add th...