Let's Control It

Gilles

Finally, I have used the Grovkillen's script (zip attached somewhere above) along with a Dummy device. I works fine and fits my requirement. Not sure to understand how does it work but it works

Thanks for your tips.
Gilles

Gilles

@Grovkillen,
do you know if today the value of a timer can be displayed as part of the json query or using a http request ?
I remember having posted the request some years ago.

NB: I have just read your last answer requiring to open a feature on GitHub.

Gilles

You are right, there are some other rules to make the button work. I usually don't use the button. I use the wifi ( http://192.168.1.118/control?cmd=event,AL ) to switch on the heater(which is in the basement) during my breakfast, so when then I go downstairs to the basement to work, the temperature...

Gilles

I have a S26 that I have just upgraded ( see above). Once upgraded , I have copied the configuration of the S20. I use both to switch on/off heaters using wifi. I don't use the S2x button. s20.JPG s201.JPG s202.JPG The S20 runs GIT version: v2.0-20180126 along with these rules: On ET do gpio,12,0 gp...

Gilles

With the December espeasy version, I need to tick the "inversed logic" option at t he device level. If I don't, when the S26 is switched on, the bulb connected to it is switched on as well. Here is the december version screen . Look at the yellow part. S26.JPG Before the upgrade, I didn't ...

Gilles

Hi Ath,
you were right.
I have just upgraded the Sonoff S26 to the "ESP_Easy_mega_20231225_normal_ESP8266_1M" version and now , everything looks fine.

NB: just one thing, Now, I must tick the Device "Inversed Logic". It was not ticked with the former version.

Thanks again
Gilles

Gilles

Hi Ath,
Sorry, I have posted a wrong url. But I was talking about the same .

Gilles

I will check and order it if I think that I am able to make it. I suppose that I have to first flash the new one before solder it on the S26. So can I use the "blank_4MB.bin". I have found a link which explains: Sonoff S26 EEPROM Upgrade – MakeNotes.de but I am not sure to understand every...

Gilles

Thanks for your explanation.
I suppose I can't upgrade using wifi so I need to reopen the Sonoff S26 and solder the cables again

The S20 was easier to upgrade.
Gilles

Gilles

Added a notify to be alerted in case of answer.

Gilles

I run a SONOFF S26 1.JPG . I cannot save the rules and the GUI seems incomplete. 2.JPG It shows "saved" even before saving anything , after a factory reset. I have configured this S26 several months ago and I don't remember having any issue with it. After several unsuccessful tries, I have...

Gilles

Yeahhh,
I have just tested the url : https://td-er.nl/ESPEasy/latest/
and it has worked like a charm .
BRAVO

Thanks a lot

Gilles

Thanks guys,
It is a real pleasure to see that this forum is alive and reactive after such many years.
I will stop using arduino ide and I will give a try to the TD-er advice.
Thanks again
Gilles

Gilles

I have even soldier the wires to be sure. Nothing happens. (I run Windows seven) .I have tried with DOUT and without. The bin is : ESP_Easy_mega_20230623_normal_ESP8266_1M.bin. I push the flash button before connecting the Sonoff. The ESP.Easy.Flasher screen stays frozen. After each try I have to cl...

Gilles

I found the answer :
N.B. Starting 2022/07/23, 1M ESP8266 builds can also be used on ESP8285 units and thus there is no longer a specific ESP8285 build anymore.
extract from https://github.com/letscontrolit/ESPEasy

Gilles

I read in another thread (https://templates.blakadder.com/sonoff_S26R2.html) that the sonoff S26R2 runs a esp8285 with 1M flash.
Does it make a difference or can I still use ESP_Easy_mega_20230623_normal_ESP8266_1M.bin.
I prefer to ask before burning it

Gilles

Great and bravo

Gilles

Thanks Epost.

Gilles

Hello, I have just received 2 x Sonoff S26R2. There is no more tx rx gd and vcc pins like with the former S20. Now I have to solder... I have 3 questions: 1) What does "PUYA" stand for? This word is used in the forum and seems to be related to the S26 and would require a specific espeasy v...

Gilles

You are right, this version (20201022) works well. I have everything I need now:)
Thanks
Gilles

Gilles

Thanks,
I will download it asap.

Regards,
Gilles

Gilles

Else, could you advise an older espeasy version (which has the notification feature) that I could use as I don't need a lot of features : I have connected one reed to detect when the window is open and 3 rules ( timer + sendhttp + sendmail) ?
Thanks
Gilles

Gilles

Thanks a lot.
Good luck
Gilles

Gilles

I have uploaded the ESP_Easy_mega_20201130_normal_ESP8266_1M.bin release to the SONOFF. Again I get no notification available.
Can you help ?

Gilles

oops, I was too impatient.
My bad
Thanks

Gilles

The Release mega-20201130 has been published but it only contains 4M versions. Would be it possible to have the 1M version ?

: sonoff91.JPG (104.95 KiB) Viewed 16989 times

Gilles

Thanks, I will check the config.
1) What would be the LOG config to see a maximum of events?
Today I have set

: sonoff9.JPG (34.93 KiB) Viewed 17034 times

2) Do you have an ETA for the next build?

Regards,
Gilles

Gilles

any idea about the timers issue?
In the log, there is a record when the timer is set, but the rules are not applied when the timer reaches 0 .

Gilles

The smtp notification doesn't work but I may have a configuration issue. On the other hand, it seems that this version doesn't detect when a timer reaches 0 so doesn't trigger the rules/notifications. I think that I will downgrade again to the version I was using for several years as the new ones ar...

Gilles

I have downgraded to ESP_Easy_mega_20201016_normal_ESP8266_1M.bin instead of ESP_Easy_mega_20201125_normal_ESP8266_1M.bin and now, the notifications are back

Gilles

This morning, I have tried to use FlashESP8266.exe instead. I have copied the bin file I want in the same directory and it has worked. The SONOFF S20 has been flashed. Build:⋄ 20111 - Mega System Libraries:⋄ ESP82xx Core 2843a5ac, NONOS SDK 2.2.2-dev(38a443e), LWIP: 2.1.2 PUYA support Git Build:⋄ Pl...

Gilles

I have tried to use ESP.Easy.Flasher.exe. No way, it stays frozen with: sonoff7.JPG The port is the COM3 port. The FTDI doesn't blink. I have also tried to tick DOUT. Then I have used Arduino and it has compiled and loaded a version(with the same wiring) , but you are right it is an old Espeasy vers...

Gilles

Thanks,
I will give it a try.
But the arduino has loaded the firmware anyway. And there was no compilation error

: sonoff6.JPG (60.75 KiB) Viewed 17158 times

I will check this evening. I will also try again to use your tool instead of Arduino.

Gilles

I am afraid there is no date.

: sonoff5.JPG (85.39 KiB) Viewed 17164 times

Can it be an arduino issue with the compilation ?
I have tried several times to use ESP.Easy.Flasher.exe but once started with the right COM port and bin file, it doesn't do anything.

Gilles

I have downloaded : ESPEasy_ESP82xx_mega-20201125.zip 72094 Ko
from : https://github.com/letscontrolit/ESPEas ... a-20201125

Gilles

Thanks I have upgraded the sonoff S20 to the version : ESP_Easy_mega_20201125_custom_beta_ESP8266_1M.bin with Arduino becasue the ESP.Easy.Flasher.exe didn't work for me. But I don't see the fields : sonoff2.JPG removing the attachment And the main panel shows "GIT Version Custom" instead ...

Gilles

I have a sonoff S20 flashed with sonoff.JPG I am using it to check if a window is open for more than 10 minutes and then it sends a mail. The mail doesn't work anymore. I would like to use smtp2go but, I cannot configure the notification with smtp2go because the "pass" field is missing. I ...

Gilles

@Shardan,
Thanks for the clarification
Gilles

Gilles

I was reading the project : https://www.letscontrolit.com/wiki/index.php/EasyNotifications , you now recommend to use a esp-12F. I suppose that it is because it has 4MB memory. Unfortunately, it has not a connector for an external wifi antenna (the ESP07-S has), useful when the mailbox if far away f...

Gilles

Hi Sherdan,
so the 100K-Resistor of around 2 Watt has to be connected between the main 230V and the optocoupler right ? Between 2 and 6 or between 1 and 2 ?
I hope to go to the shop this week. I will ask for an optocoupler with a "normally closed" relay.

Gilles

Based on your example, and as I have more than a lack of knowledge in electronics, I have searched the web and I have found this (sorry in french) diagram: detection-du-secteur-230v.jpg . OUTPUT: 0V if electricity exists and 3,3V if cut The point is that the esp will receive 3,3V when the electrical...

Gilles

oops , sorry I have added my post at the same time as yours .
Thanks
Gilles

Gilles

Herer is the simple diagram I am thinking of, based on TD-er suggestion.

: optocoupler.jpg (15.73 KiB) Viewed 18558 times

Gilles

Hi TD-er, I went through some doc on the optocouplers. In your example,in a normal case, when there is no electrical power cut, the optocoupler LED will close the (power) circuit on which the esp (deepmode) is connected to. AND It will open the power circuit when there is an electrical power outage....

Gilles

Thanks TD-er, good idea.
I am not an electronic specialist, so I will try to ask around some friends. My understanding is that when there is a power outage, it closes a second circuit which can be used with the deepsleep feature to awake the espxxx.

Gilles

During our summer vacations far from home, there has been an electrical power outage in the house. I had detected that there was no more internet access to the house but no way to know if it was because of the Internet box. At the end I have called a neighbor but it was too late for the freezer, so ...

Gilles

When I set the GPIO13 to 0, the blue light is switched off, but the green circle is switched on. I need both to be switched off to sleep :). Is there a way to switch off the green one and the blue one? Nevertheless, I need the sonoff internal switch to be up because I have a lamp connected to the so...

Gilles

It is a basic question but I went through the forum and I didn't find any answer. The keywords are maybe too simple. I would like to use the sonoff S20 in my bedroom, so I would like ALL the lights(circle green, blue) to be switched off, but I need the sonoff to remain "active"( button, sw...

Gilles

Thanks
I assume that :
GPIO 1 if I use the TX
or
GPIO 3 if I use the RX.

For the record, to disable the serial port , go to Tools, Advanced, and untick the "Enable Serial port:" in the "Serial Settings" section.

Gilles

Hello, I would like to use a SONOFF S20 along with a reed switch to check if the window is opened or closed. Then I will add rules to send a mail if the window is open for more than 10 minutes. I have read some examples in the forum where LisaM said that using the gpio 1,3 ,13 and 15 is not good, be...

Search found 101 matches