iz8mbw wrote: ↑09 Aug 2023, 08:20


Anyway please download the Manual and Modbus specifications of TAC1100 and TAC2100 from here: https://we.tl/t-XCbqdM1Vof

Thanks.

The wetransfer is no longer valid can you send the manual to we transfer again or post it here?
Many thanks in advanced

thx for your reply, Changing to pusbutton is not that easy, i have a wall switch that controls two separate lights it is a double three way switch. it can only be a changover switch. i wanted to use the relay as the second threeway swithc like you suggested. i just need a way to update the icon in d...

Hi, i want to control light in a room with domoticz an the threeway switch. The wall switch is a threeway switch so i can buils a travelar system Walswitch and relay witch changeover contacts together is should work as a traveler system Now i encounter the problem that the actual state of the light ...

I need no mesh network.
Just connection between my iphone esp device and laptop.
The esp device will be action as accespoint and also capabilities to set a relais reading a sensor.

Basically add softaccespoint to the easpeasy for the esp32 ill think.

Hi Guys, i want to use the esp easy devices in a enviroment where power might be an issue. For that i dont wat to have extra routers and accespoints. I just want 1 esp device that acts also as a wifi acces point so the iphone can be connected. That iphone will send the http commands to the esp devic...

connected it wit jumper wires on a bread board.
the CH_PCD connected with +
it boots because i see the lets controlit easy esp webpage.

it looks like it doesnt understand the command from domoticz : http://172.16.200.230/control?cmd=GPIO,0,1

hi,

i cannot get it working with domoticz.
flashed the firmware, see the configpages of the esp-01.
use the same settingas with some other esp module's and i cannot get the output switching,
got the correct idx and the gpio-0.

any thoughts ?

i found the new firmware V2.00
connected the esp01 the right way and it flashed



thx guys

any news about a puya solution ?

ok thats clear, i just need some patientce

ok now the problem is known, wil it be solved or do you i have to do some work myself ?

4Mb flash chip didn't did the trick

now wait until someone finds the right solution for the puya flaschip

i ordered 10pcs of 4mb windbon flash from aliexpres.
i saw some youtube movies that it works fine with these flashschips.

now wait for the mailman

it looks like the same problem/
i dont see any solution there

ok, tried that no result.
esp comes in to flashmode blue led on.
the flashtool can not connect.

i have two of these devices both ar not flashable
it are the blackones with puya memory

what tool for flashing ?

Hi,

i am stil not able to flash the esp 01 module
it hase the puya memorychip.

any ideas ?

gpio0 low and gpio2 high didn't work