Let's Control It

M*I*B

Jepp, I have try it many times via OTA. Wonder why it don't like due yesterday with the 0412 it goes on 1st try without hassle... Just some minutes ago I have flash it the 3rd times with the factory via serial. Now the ESP is reincarnated and talk to me again *puhhh* I have no idea what ghost like t...

M*I*B

... yesterday evening I quickly installed the ... - ESP_Easy_mega_202404 12 _max_ESP32s3_16M8M_LittleFS_OPI_PSRAM_CDC_ETH and now just wanted to quickly install the - ESP_Easy_mega_202404 14 _max_ESP32s3_16M8M_LittleFS_OPI_PSRAM_CDC_ETH which was released shortly afterwards... Doesn't work, at least...

M*I*B

... I let you know tomorrow (Monday) evening

M*I*B

: thumbs-up-smiley-36.png (7.85 KiB) Viewed 181 times

M*I*B

I can't quite understand it yet, but sometimes IPv6-capable devices try to get a v6 from the DHCP instead of the v4 and then of course fail because v6 is deactivated in the DHCP (ISC DHCPd version 4.4.1). In my opinion, v6 makes absolutely no sense in the LAN unless you are running a server farm...

M*I*B

... forget to ask: Any way to completely disable IPv6 (Stack)???

M*I*B

Ok, will do so tomorrow and report then... Ty

M*I*B

This one on both: Build:⋄ 20240331 - Mega32-s3 System Libraries:⋄ ESP32 SDK 5.1.3.240313 Git Build:⋄ mega-20240401 Plugin Count:⋄ 147 ["Normal","MAX ESP32"] Build Origin: GitHub Actions Build Time:⋄ Mar 31 2024 22:43:10 Binary Filename:⋄ ESP_Easy_mega_20240331_max_ESP32s3_16M8M_L...

M*I*B

... nope, not this kind of PB: DIY

M*I*B

A new problem that kills the whole project: I've had two identical test systems running on breadboard for the past few days, completely identical in structure with identical display, GPS, firmware, rules, devices and so on. Both systems are individually connected to a power bank, which are charged b...

M*I*B

Good morning all together, In the meantime I have gotten around the problem with the display using rules. Not nice, but it works for now... But for today I have "rebuild my 3D printer station to create a better WAF" on my note. And if the weather stays dry, I'll probably have to spend a fe...

M*I*B

I understand you very well. I had similar experiences with the “energy rip-offs”. In the meantime, I have decided not to sell my PV energy anymore. I still have an old contract until '27 that guarantees me 33.5C/kW (before tax, of course), but the purchase price is already over that. So I took the s...

M*I*B

Well... In Germany this is now the order of the day after the green dirt shuts down one power plant after the other. Two digital three-phase meters died at the site last year due to network problems; They were both less than a year old. Then it caused real issues at the end of the year. But even bef...

M*I*B

... excavator is running again, finger jammed, car moved with excavator, lawn mower repaired... Closing time... :roll: Back to the topic: A second ESP for redundancy might not be a bad idea. Then it has to be on the same circuit so that under no circumstances can only the counting ESP be switched of...

M*I*B

Before I go out to repair my excavator, I thought about something that will make or break the whole project... The data collected, at least the summit data, must somehow be saved and accessed absolutely safely, even after a power failure or even destruction of the ESP. The original idea with the cac...

M*I*B

HAH... Day is saved

M*I*B

Nah, must have been something we're missing here or else... you may have found a bug? I think it is just missing documentation here :) Assuming you didn't actually use GPIO-8 as that is connected to the flash :D :D :D Hey, let me find a bug pls, let me :lol: No, I have checked every single port fro...

M*I*B

... has no effect if I change to 8 or any other not listed as "baba". All timeouts over 1 don't work ...

M*I*B

Ahhh ok, that should be also a way to go. I will try that also to learn. Thanx a lot! Meanwhile I crash into one more problem (BUG?) with framed display: If I declare GPIO17 for a momentary switch (reverse, pullup) and also disable "Wake display on receiving text" and set the display timeo...

M*I*B

...for now I've circumnavigated this cliff from behind through the eyes ... On system#boot Do TaskDisable,GPS Let,1,0 LoopTimerSet,1,1 TimerSet,2,30 oledframedcmd,1,'ERROR: No time source !' Endon On Time#Initialized Do Let,1,1 Endon On Rules#Timer=2 Do TaskEnable,GPS Endon on GPS#GotFix do Let,1,2 ...

M*I*B

Ath wrote: ↑11 Apr 2024, 10:03 I think I can add a new variable to the GPS Plugin, providing that Fix value, it seems useful...

: thank-you-so-much-we-appreciate-your-help.gif (729.42 KiB) Viewed 433 times

M*I*B

The %ntp% variable is probably named poorly as it just indicates whether the time has been set. OK (thinking... thinking... grab a coffee... thinkin...). But then I don't understand it either... If this variable shows whether the time is set or not, then it should go to false/0 if neither a GPS nor...

M*I*B

Good morning all... There is the %isNTP% variable (no ESPEasy at hand here, better check the System Variables page) ... yes, there is. But that don't work. This var stay still true if I stop the local NTP-server and/or bend the IP in ESP to a non-existing one. Also, if I completely disable the use o...

M*I*B

You might want to enter the WiFi lines again one line at a time. Or make sure you are connected to the "COM" or "UART" port and not the "USB" or "OTG" port. I have seen the "Native USB" port may sometimes drop some characters when entering commands ...

M*I*B

... ha... just catch me go with my finger to the power switch of the PC... For GPS I can use GPS#GotFix and GPS#LostFix to check. What I have understand is that without a GPS-fix it falls back to NTP source. But what happens if NTP are also gone (no network, NTP-server down, ...)? How can I check by...

M*I*B

... that's all in my hTerm-script... Look yourselfe: EraseSDKwifi ClearPassword IP,192.168.1.210 Subnet,255.255.255.0 DNS,192.168.1.111 Gateway,192.168.1.111 NTPHost,192.168.1.1 UseNTP,1 DST,1 WifiSSID,blabla WifiKey,blubblub Rules,1 TimeZone,60 Save Reboot BTW: For GPS I can ask for fix via event h...

M*I*B

Via serial you can send the commands for setting up the WiFi connection: WiFissid,<your_wifi_name> WiFikey,<your_wifi_password> save And the same WiFi commands can be used for the second set of WiFi credentials by appending a 2 to the commands. That way you can also invalidate the WiFi settings so ...

M*I*B

Good morning all together ... ... some hint to lighten the day: For men over 50, a urine sample in the garden is sufficient for a health check: Go to the garden early in the morning on an empty stomach and pee. - If ants gather on the ground, you have elevated sugar and probably diabetes - If it dri...

M*I*B

... nope, just 20 ... I ever start in the middle :lol: No not really; Joking aside... If they're new, there's probably a little mini-program running that always controls the LED in a circle r>g>b>r... I used the scope to see where the signal for this comes from.. I think I will print a transparent l...

M*I*B

Ty for the many answers... I will try that...
And for the framed: It's ok... I really don't know about the code behind so if you say that's hard to do or impossible then I can use that to ship arround ...

Ok... Time for a little relaxing...

EDIT:
It's a NeoPixel on GPIO 48

M*I*B

Ahh ok... Then I haven't to wonder about. I will try that from back through the eye

Last Qu for today:
On the Board there are an multicolor LED. I think that's a NeoPixel? If so, what is the GPIO for it? I don't find any documentation about this board

M*I*B

LOL... Ty for the compliment. ;) Crash into next... Why I don't see a 1 or 0 at the display if I do this at line 2 ... . Clipboarder.2024.04.09-004.jpg . ... where the GPS device is called this ... . Clipboarder.2024.04.09-005.jpg . . . EDIT: Meanwhile I have changed the Display device to "fram...

M*I*B

TD-er wrote: ↑09 Apr 2024, 17:23 Already way ahead of you

Shit

Now I was very happy that I had a great idea and then the big hammer came, other persons, in this case you, was faster again...
I'm going to cry for a bit now...

EDIT:
Looks ok so far (indoor near window)

: Clipboarder.2024.04.09-003.jpg (7.1 KiB) Viewed 718 times

M*I*B

ohhh, that I haven't await; that's cool! Then I can stop searching and reading to find the howto for that :lol: Thanx a lot... Time to heat on the iron... Just an idea comes in my mind: For things without internet and available NTP like my project, maybe a good idea that you can declare the ESP with...

M*I*B

AHHH! Ok... So they are in parallel to the onboard ser2usb then... So good that we have talked about 8-) The I use some other... Some else: I have seen that I can set many things for the GPS-device, but not the also transmitted time/date. At the moment I use my local NTP via WLAN as time source, but...

M*I*B

Ok, all set what I need for basics. Now time for the connection of the GPS. I'm right if I connect the GPS to the RX/TX named PIN's on the board (top right under GND)? If so what GPIO's are this for "ESP RX GPIO ← TX" and "ESP TX GPIO → RX(optional)" ? I haven't find a hint for t...

M*I*B

Ok, I have use the ESP_Easy_mega_20240331_max_ESP32s3_16M8M_LittleFS_OPI_PSRAM_CDC_ETH.factory.bin and it seems to be working. Have just set the WLAN credentials via terminal and I'm connected well now and can reach the GUI...

It's simple if you/I doing well

M*I*B

I didn't know that there were different builds for the SX types.
.

: tenor.gif (1.1 MiB) Viewed 735 times

.
.
I download that again ... This ... correct?
.../espeasy_mega_20240331_esp32s3_binaries.zip

M*I*B

any went wrong ?!?

: Clipboarder.2024.04.09.jpg (43.97 KiB) Viewed 739 times

... goes into this fast scrolling after reset at the Port:

: Clipboarder.2024.04.09-002.jpg (52.71 KiB) Viewed 739 times

M*I*B

... I'm still waiting for the ESP's from Ali. I'm curious to see whether they can keep their 6-day promise... But today another idea came to me in this context: The heating control also has a timer with a weekly program so that, for example, the night time reduction can be set depending on the time ...

M*I*B

... jepp, I think so also... And (maybe) a retoure to China is more expensive as simple cash back...

M*I*B

Little Update... Yesterday I received an almost identical message from the alleged "Jenny", which only differs in the last part. Then she tells me that, contrary to her initial announcement, she doesn't want to send an ESP32 and doesn't want to send a return label, but will refund the amou...

M*I*B

... nope ... Was a plain mechanical problem ... For reasons of space (collision Z at the top right), I replaced the pressure spring with a short screw and Viton O-ring as a spring. For whatever reason, the screw tightened on its own and pushed the filament square. This in turn led to a “tooth failur...

M*I*B

Thank you for the hints. If it says so, and since I now know how to read it with your help, it will be easy. As soon as the parts arrive here, I will upload a picture immediately. They will probably arrive later than the ESPs from AliExpress that I ordered yesterday... We'll see. At least I have now...

M*I*B

Thank you for the hints. The dealer wants to send me what I ordered again along with a return label for the scrap. When the ordered goods arrive here, I would like to determine visually whether it is an ESP32 with 16M or not. It's now very difficult for me to even roughly distinguish between all the...

M*I*B

The report to eBay about a fraudulent offer and the negative rating seem to be having an effect. Because after that the seller moved and wrote (translated) the following: Message from seller Hello, we deeply apologize for the inconvenience caused by the incorrect delivery. After carefully reviewing ...

M*I*B

Ty for the hint... I have try that. Only can order one but for a welcome price of 1,97€ and no shipping fee... I will see if that arrives here due the Asian have absolute no idea how addresses are build in different country's... EDIT: Have placed a 2nd order of three for 5,77€ each... I will report ...

M*I*B

... jepp, that's for sure ...
This dealer is obviously a grievor at its best.

M*I*B

... jupp ... I will search a little more. Shipping from NL isn't cheap ...

The fraud item comes from eBay. I have checked it many times. So here you can see that the dealer offers an ESP WROOM-32 with 16M Flash. Picture show it and also the item description...

M*I*B

The image you show is an ESP8266, so that's not going to accept any ESP32 build... Ok, then my bad gut feeling didn't let me down. I wasn't 100% sure whether the ESP32 might be called something else. But when you say they screwed me over, that match with my gut feeling. So at the moment no need for...

Search found 370 matches