Ok thanks I understand now, so I have to regulate the step down near to 3.3V to optimize the consumption and heat.

The reed switch is connect like the picture in the first post, but I don't know why he always count... It seems to be a interference...

The board is a ESP8266 NODEMCU. This one: https://cdn.instructables.com/FGR/3LN7/ISCC05TC/FGR3LN7ISCC05TC.LARGE.jpg?auto=webp&width=600 And I have 12V power supply in place so for power the board I use a step down dc dc: https://i.ebayimg.com/images/g/EdIAAOSwvg9XXP24/s-l300.jpg (in this the out...

Could be a problem of the 3.3V supply? I have many devices connected to the internal regulator. SHT10 sensor, bmp180 sensor, ldr for light measurement.
This is all. You suggest to use external 3.3V power supply?

Yes this output is also a power supply for LDR and his output go in analog input in ESP.
All the 3.3V and Groung in my board is used.

I feed the unit with 8,5V in Vin input. And at the end of the reed I have 3.22V.

If I'm not mistaken, your input from switch goes to GPIO2, not GPIO15 as declared on pulse device. Change to GPIO2 and check results. Don't forget to turn off Serial as GPIO2 is a TX pin! Best regards Robert The pitture is just an exemple, in real i use a GPIO15. :) Please disconnect rain gauge (re...

Well.... At the risk of sounding like a smart-ass it's doing what its intended to do. It will keep counting up until hell freezes over. You need a formula to process the count. You need to figure out how much rain is in a bucket tip and process it with a time frame reference. Perhaps a study of the...

kluszczyn wrote: ↑04 May 2018, 08:27 If I'm not mistaken, your input from switch goes to GPIO2, not GPIO15 as declared on pulse device. Change to GPIO2 and check results.
Don't forget to turn off Serial as GPIO2 is a TX pin!

Best regards
Robert

The pitture is just an exemple, in real i use a GPIO15.

No one happed this issue?

Dear All, I have a ESP8266 with espeasy, and I heve connected to this a simple Rain Gauge counter. This is made by a simple reed switch. See here the connection exemple of the connection: https://i2.wp.com/randomnerdtutorials.com/wp-content/uploads/2016/02/magnetic-contact-switch_bb-2.png I have set...

Dear Drum, Thank you for your answer. I think i have find the solution for the 60min rainfall, but tonight i have to make some test if it's possible to do this. I try to create 3 dummy device each with 4 variables. Than i make role who switch the variabes (the value of the 12 in 11, the 11 in 10, 10...

I do not know if this is possible in the rules, but I was able to do this in node red fairly easily. I was not trying to upload to WU, just to a local sqlite database. Dear Drum, unfortunately i don't use node red (i think i have to learn more about it), to client side I have the raspberry with mos...

Dear all, I'am back here with another challenge to win, obviously with your help. I have 3d printed a simple rain gauge, who is connected to one ESP8266 with ESP Easy Mega. This simply cont every time the rain gauge shift the position. (for now i simply count the shift at the end i transform this in...

Dear all, sorry for the delay but I not have received the notification for the new post.... By the way, now all working correctly and this is my complete situation: meteo.PNG And this is the two rules I use to converting the value and send all to wu: Rule 1 on T6H#Temperature do TaskValueSet 4,1,[T6...

I have solve the issue with the firmware update.

I have partialy solved, but I still have one problem, on the dummy device I'am not able to assign name to the 3 an 4 value. Why?? There are different types of dummy device. You must chose something with quadruple value. I have tried also with quad or triple bus the last two is no way to name it... ...

I have partialy solved, but I still have one problem, on the dummy device I'am not able to assign name to the 3 an 4 value. Why??

I try tom re read all the guide and try to understand...

Is the one I have write before.

Now Yes....

I have studied this guide but unfortunately I don't understand so much. The firs think I have to do, is to create a Dummy Device who convert a °C in Fahrenheit, because the wu strung need Fahrenheit. I create a Single DummyDevice with value called TemperatureF. In the rules I wrote this: TaskValueSe...

Dear All, i have this problem: I have instal the EspEasy on a ESP8266. This board is a weather station with connected DHT22 Temperature and Humidity sensor and BMP180 for a Pressure. I'am trying for a long time to pubblist this three vale to weather underground site, but without success. Can someone...