I did this this way:
Create a Dummy Text device in Domoticz and send an HTTP command from Rules.
SendToHTTP 192.168.x.xx,8080,/json.htm?type=command&param=udevice&idx=IDX&nvalue=0&svalue=TEXT

I think it's a NUVOTON 8 bit 8051 compatible microcontroller

There is a lot of information on this website https://nl.aliexpress.com/item/32968011600.html?spm=a2g0o.productlist.0.0.12167edeRZConb&algo_pvid=bbe806bb-9633-4f2e-afeb-eab3aa43f074&algo_expid=bbe806bb-9633-4f2e-afeb-eab3aa43f074-4&btsid=69f21f55-7157-48c8-a20e-a37dbfb483cb&ws_ab_test=searchweb0_0,s...

Pay attention!!. Do use a rechargeable Lithium battery.
A normal battery is inflated during charging.
(Or remove the diode from the circuit board)

I have a Sonoff PowR2 in use with a small Oled screen connected to it. Normally the PowR2 received a Hardware Watchdog Reboot within 8 hours. The Sonoff PowR2 has a fixed IP number. After switching off the Serial Port and the UDP Port, and switching on Force WiFi B/G the device has been working for ...

I made this for a BW-SHP6

After many tests I use Release 2.0 - 20180322 without any problems

I found it somewhere in this forum.
I'm trying to make a .zip file out of it.

Try this one. I use it successfully.

grovkillen, I am not a programmer and a previous attempt has failed, but I will try again.
Thanks for your help.

TD-er, thank You for your quick response. The tool is the official Espressif programming tool. I already found the .csv files from your answer, but how to translate that into the tool is not clear to me. Another way of programming the ESP32 is unknown to me, and I can not find it on the Internet eit...

I got an ESP32 (Lolin32 Lite) working with ESPFlashDownloadTool_v3.6.4 with the following settings some time ago. Now I would like to use the esp32test_1M8_partition.bin, but this does not work with the same settings. First I erased the memory with blank_4Mb. What should I change in ESPFlashDownload...

Problem fixed IP number resolved !! Today I did some tests performed with the latest version. After consulting with a 'Colleague and Friend' he came up with the idea to fill in 255.255.255.0 at 'ESP Subnet:' on the Config Page.. In fact, this is the subnet mask of the fixed IP number. The problem w...

Tested today the latest version of 20180708. The problems I had are still present. After many tests I come to the conclusion that, when using a random DNS Server, my Wemos-D1 mini gets an IP number from the DHCP server of my Router. The NTP server also gives the correct time setting. However, when I...

With the last 4 print screens I have worked as follows: The module 'Wemos D1 mini (4Mb)' first completely deleted from 0x000000 up to 0x3FFFFF with the file blank_1Mb.bin Then implemented a Flash with Firmware mege-20180621. On the Config page everything filled in as Print Screen 'local_dns_config' ...

I'm sorry, something goes wrong with the placement of the print screens

After a number of experiments with version: ESP_Easy_mega-20180621_normal_ESP8266_4096.bin,
here the results in a number of printscreen images.

Thank you for your quick response.
I think I filled in everything, but I will try again.

I installed mega-20180410 on a Wemos D1 mini. This version works excellent without any problems with a static IP number. Because there are new developments (for example, %sunset% and %sunrise%), I wanted to install one of the latest versions. I have installed several versions but no version works wi...

Hi, I bought an ESP Lolin32 Lite and flashed it with ESPEasy32 v.20100. Unfortunately, I can not configure the ESP32 because I use a WPA Key on my Router containing the '&' character. I use a dozen ESP8266 modules that do not have a problem with this, not even with version ESPEasy v. 2.0. Will this ...

Martinus, thank you for your quick response.

I have tested it and it works very well now.
My mistake was that I had used a space behind each comma to increase legibility.
Thank you again very much.

Remote Threshold configuration (feature implemented only on github version as of Aug 8th, 2017) This plugin has the ability to change the Treshold (Set value in the GUI) with a command that can be send through HTTP/MQTT. Syntax config,task,<taskname>,setlevel,<value|calculation> Example if your task...