Let's Control It

spachal

OLALÁ, that's really great, the timing is perfect :], thank you for good news and your efford!!

spachal

Hello, now I'm dealing with the same problem, I'd like to use multiple I2C devices with the same address connected in one ESP. Is there any news about support of this expander? I'm doing a small hobby project, something like humidor (only not for cigars, but for ripening of puerh type teas, it's har...

spachal

Hi Thomas, thanks for your help! :] I found that URL with port80 is redirected (301) to secure connection in browser automaticaly, so this is probably the root of this problem .. I tried also all mentioned variants, all the same, not working. I'm going to solve this with mqtt & node-red, but it ...

spachal

Hi, I don't know how it works .. If I send URL like this one via browser, I receive Telegram message without problem. http://api.telegram.org:80/bot..... In this article are also some informations about HTTP protocol: https://core.telegram.org/mtproto/transports#http And I know that it's possible to...

spachal

Hello, I need your help :]. I'm trying to make some notifications from espeasy to mobile phone and send messages (notifications) to Telegram. I have userID and API token, sending messages from browser to Telegram client is without any problem, URL is simple: http://api.telegram.org/bot<token>/sendMe...

spachal

Yep, I understand that, but all posts were from 2017, so I was curious if there is something new :] So thanks for quick info, I really appreciate it! The easyest way is to buy some pieces and test it, these ones from AE are cheap enough :]. And of course I'll try to make it waterproof, probably with...

spachal

Hi, sorry for opening an old thread, but is there any news about soil moisture sensors? I found that in DEV MEGA version is this plugin still "TESTING", is it usable now? I'd like to use three sensors for my home plants, I2C communication. So I have a few questions: - I'd like to support d...

spachal

Hi, just FYI, I had also problems with sending data to TS. I can't figure how to do that (" Error : HTTP : C004 connection failed " all the time), after I changed Client timeout from 100ms to 1000ms it starts to work! Everything else I configured as described here: newest build mega-202002...

spachal

Hallo, you are right, of course, I just ask wrong question.. Wiki about calibration I know, I just don't have any precise thermometer for calibration (or lab equipment) and I can't also use water with ice to calibrate at 0°C, because none of sensors is waterproof :]. But you answered my question any...

spachal

>dynamicdave: grovkillen is right, not all these power supplies are 'problematic', but I destroyed one D1 mini by myself, imho there is still my picture on wiki :)) .. https://www.letscontrolit.com/wiki/index.php?title=Power Just take any voltmeter and before connecting any device to this kind of po...

spachal

Hi, do you have any experience which temperature and humidity sensors are 'the best' for ESP8266? I have a couple of them, they show a different values, of course.. So here is my test, DH11, DHT22, BME280 and HTU21D: http://sdilej.eu/pics/a37f9e1223daa2a5b6d561902c422a8d.JPG Here are aslo some cheap...

spachal

Hi, thanks to all! :] I'm going to buy 12pcs, so the price matters, a little bit :]. That's why I'm looking for any tested esp8266, that is without problems with current espeasy releases.. There is no problem with delivery time, I can wait. That's why I'd like to order boards from AE/eBay and save s...

spachal

Hi, I spent today half of day with flashing my esp8266 boards ;] .. I have the same boards as described here: https://github.com/letscontrolit/ESPEasy/issues/2008, i.e. Wemos brand - ordered here: https://www.aliexpress.com/item/-/32820380705.html. And the only fw that I found to be usable is ESP_Ea...

spachal

>Wiki: thanks, I know this project, but it's IMHO the same product as Sonoff T1, without 'mechanical switch feedback' .. >kimot: yes, I know that it COULD fit .. if there will be some spare space for two wago conncetors. That's why I'd like to buy "complete solution', as descibed in my 1st post...

spachal

Thanks again, but I really don't want to solve how to fit board, relay, power source 5V and common wall switch to small space like this one :) .. I'm looking for 'ready product', really :]

spachal

Hi, thx for info! :] >DeNB3rt: there is problem with wall box depth and relay. Maybe it's resolvable, but I'd prefer some 'certified' solution with optocoupler etc. .. >Tecumseh: same problem, depth of wall boxes is appr. 35mm, including mechanical switch. I want to replace multiple switches, I don'...

spachal

Hallo, I'm looking for some wall switch, flashable with easpeasy, with 'mechanical button', same as a common wall switch. So you know about any switch with these attributes? - espeasy inside, or flashable, of course :] - mechanical button, one click on, on click off - EU size, suitable as replacemen...

spachal

@water: the flow from @spachal is in quotes instead of code tags and the forum modifies such strings somehow. You could also try to reconstruct his flow - only the 3 nodes: mqtt -> function -> request. Code and settings you can see in his export. My bed, sorry for that, this is export of temperarur...

spachal

Can you tell me how you used node-red mqtt and influxdb ? HTTP Advanced is indeed to unstable :) Hi, here is sample float of my solution, for BME280. In espeasy I send mqtt message to broker (rasppi+mosquito, IP 192.168.166.177), node-red reads these payloads and writes them to DB. http://sdilej.eu...

spachal

OK, thanks for info, if it's 'normal', then everything is OK :]

spachal

Hallo, maybe I'm doing something wrong, but when I wire my relay array (six relays with optocouplers) with nodeMCU - this schema: https://www.letscontrolit.com/wiki/index.php/File:Nodemcu4relay.jpg, I can control it without problems by mqtt or http GPIO command (http://IP/control?cmd=GPIO,12,0 for e...

spachal

OK, I give it up ;], HTTP Advanced controller in unstable anyway (http://www.letscontrolit.com/forum/view ... f=6&t=5369), I changed my configuration to mqtt > node-red > influxdb, it works..

spachal

Hi, I'm using test builds with on nodeMCU board, with only one sensor (BME280). Everything is now stable (including wifi, thanks!), but only until then I configure HTTP Advanced controller (http://www.letscontrolit.com/forum/viewtopic.php?f=6&t=5298). After that I have a lot of reboots (appr. 3-...

spachal

Hi, thanks for info, and yes, it's possible to use MQTT for this. But on rasspi there must be another interface, which writes payloads from broker to database. And it's another 'thing that can be broken' and that's why I'd like to write to db directly from espeasy :] .. I can try to learn node-red, ...

spachal

You can do it by yourself and make your own complilation, using Arduino IDE and editing define_plugin_sets.h file. It's not clickable :], but also easy.

spachal

After few hours .. it's not stable. 20 reboots during two hours. Mainly this problem: Panic /home/travis/.platformio/packages/framework-arduinoespressif8266/cores/esp8266/core_esp8266_main.cpp:130 loop_task ctx: sys sp: 3ffffdd0 end: 3fffffb0 offset: 01b0 >>>stack>>> 3fffff80: 3fff803c 3fff802c 3fff...

spachal

Hi, I'm trying to test this 'special version', here are my results: ESP_Easy_mega-20180504-1-g92680c5_normal_ESP8266_4096.bin - everything seems to be OK, after flash there is vissible AP, I can configure wifi settings, seems stable ESP_Easy_mega-20180504-1-g92680c5_test_ESP8266_4096.bin - flashing ...

spachal

Same problem here .. I tried 20180504 release, normal version problems with wifi (AP not vissible at all), testing AP OK, but I can't reach IP of AP, dev version seems to be OK, but I don't need so much plugins etc. loaded .. hw NodeMCU V3. I'll try that multiple compiled version, all of them and re...

spachal

OK, that's true. The only reason I'm compiling own binary is IP 192.168.4.1, this IP I'm using already for other purposes in my subnet :] ..

spachal

Hi, I'm trying to 'simplify' my project and write values from sensors directly to influxdb. And I found some problems .. At first, here is my configuration (as illustrative example, it a little complicated IRL): - raspberry pi3 with influxdb and grafana as db and visualization tool - nodeMCU 7 espea...

spachal

Hi, thanks for info, it's the same. 'Original' binary from release is fast, if I compile it by myself with ArduinoIDE, response times are slow. Maybe it's caused by my IDE instalation, I used it for other projects with arduino boards, maybe reinstall could helps. I tried core 2.3.0, 2.4.0 and 2.4.1,...

spachal

Hi, I found strange problem. I have diferent response times of nodeMCU with ESPEasy on different browers or devices. When I compile fw binary in ArduinoIDE, on my desktop PC I have 'lags' when I configure nodeMCU via browser (response time in seconds). Sometimes, when I flash nodeMCU with NodeMCU-Py...

spachal

In my case, 5V works well, powered by MB102 pin output.

spachal

My mistake, now is absolutely clear, thanks :]

spachal

Hi, thanks for help, as I wrote, I tried also normal & test versions too.. always bootloop. //edit// I downloaded new version, mega-20180415. And flash ESP_Easy_mega-20180415_dev_ESP8266_4096.bin . Something is new .. no bootloop, but after reset I can see this (baud speed 74880): ets Jan 8 2013...

spachal

Up. Am I the only one with this problem?

spachal

OK, thanks all for help, board works right now, powered by power supply connected to VIN&GND pins.
Did I read that mentioned wiki page wrong, or you just edited the paragraph about board powering? :]

spachal

Hi, thanks for info, I know this wiki page, but there is no information about powering boards directly from pins .. I already know that I need reliable power supply (I have MW 5V/3A power supply available) and good thick cable with as lowest AWG as possible :]. I have three the same boards, one of t...

spachal

Hi, I'm asking about it just to be sure, because I don't want to destroy another board (is's not the question of money, but long delivery time ;] ..). I have nodeMCU 1.0 V3 board - this one: https://www.aliexpress.com/item/-/32820380705.html . I can power it by microUSB connector, of course, but I'd...

spachal

Hi, I'm trying to use OTA update for mega-20180403. I downloaded this release to ArduinoIDE and I can flash it any time. After that I was trying to use OTA update (Tools > Firmware, Load, choose file from mega-20180410 or mega-20180409) and I always get bootloop. HW: nodeMCU 1.0 v3 (ESP-12E Module),...

spachal

grovkillen wrote: ↑26 Mar 2018, 21:18 Could this be a correct way to do that?
https://paypal.me/espeasy

Yes, it seems to be OK, $5 sent, as I promised :]

spachal

Good idea, but what about to create some Paypal acc, for example, to support this project without ordering branded clothes? :]
In this case I'll send five bucks for sure!

spachal

https://www.letscontrolit.com/wiki/inde ... figuration :)

May be used but observe that signal might flicker due to serial activity during boot.

spachal

Hi, I just lost two ESP boards, probably thanks my stupidity .. But because it's not complete my fault, here is the warning. DON'T USE USB port on MB-102, as output!! A few minutes ago I tried to use MB-102 as power source of my project, because of testing 6 channel relay module and to provide good ...

spachal

Hi, try to update to newer build, there are more options there :] .. You can use your own SMTP and set up user authentication.

: smtp.jpg (52.08 KiB) Viewed 2787 times

■

spachal

Thanks both of you, good news! :]
Maybe I can fit to 2048 limit now, when boolean logic in rules are possible, but I have to re-write it fully, after that I will see. But it's good to know that it's not necessary. Processing time does not metter in my case :]

spachal

Hi, can you describe your situation or give us your current rules configuration? For example, you're using PIR sensor and you need to send state to broker .. You have defined PIR as device and need to record it's state. By default, you can use function in Device setting, Data Acquisition > Send to C...

spachal

Thanks for this explanation, does it mean that there is overall character limit for all four sets 2048 characters or each set has 'own' limit?

spachal

papperone wrote: ↑11 Mar 2018, 19:48 I think the AND / OR boolean have been introduced recently so you can certainly use them:

PERFECT, that's exactly what I need, it helps a lot, thanks!! :]

spachal

TD-er wrote: ↑09 Mar 2018, 00:49 I just added a number of new events to be used in rules.
See Pull Request: https://github.com/letscontrolit/ESPEasy/pull/1032

These will be in the next build, which will be made around 5 am (in about 4 hours)

Hi, that's really great, THANK YOU, very useful!! :]

Search found 55 matches