Search found 95 matches

by Oxyandy
07 Jan 2019, 05:12
Forum: ESP Easy: General Discussion
Topic: No infrared plugin ?
Replies: 5
Views: 511

Re: No infrared plugin ?

IR would not be a common usage I guess, so maybe you need to add the required files & self compile, bit of reading here post #39 showing required files. http://www.letscontrolit.com/forum/viewtopic.php?p=8709 Anyway sure someone will be able to guide you better with real experience, this will get yo...
by Oxyandy
11 Jun 2018, 01:34
Forum: ESP Easy: General Discussion
Topic: Help - update bricked S20
Replies: 43
Views: 6919

Re: Help - update bricked S20

Did you set the baud rate in Termite to 115200 ?
Are you seeing any 'Readable Text' in Termite ?
If so go back read my earlier post...
(You need to see the text output as Sonoff is first powered)
by Oxyandy
08 Jun 2018, 23:09
Forum: ESP Easy: General Discussion
Topic: Help - update bricked S20
Replies: 43
Views: 6919

Re: Help - update bricked S20

Grab Termite https://www.compuphase.com/software_termite.htm with FTDI plugged in & Sonoff connected, no other serial monitors open (will only work with one at a time) Configure correct COMs port to match FTDI You should see output like you have already (every 30 seconds) Uptime 2 ConnectFailures 0 ...
by Oxyandy
04 Jun 2018, 22:59
Forum: ESP Easy: General Discussion
Topic: Help - update bricked S20
Replies: 43
Views: 6919

Re: Help - update bricked S20

Sure, this says it's still alive, ;) Assume by now you have cold booted while connected to a serial monitor ? Information you need will be visible to you then.. Then it will help to know the available serial commands https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference EG setting W...
by Oxyandy
03 Jun 2018, 22:43
Forum: ESP Easy: General Discussion
Topic: Help - update bricked S20
Replies: 43
Views: 6919

Re: Help - update bricked S20

Connect to Serial Monitor program, then power up S20, you should see output
The LEDs are not pre-configured in the firmware..
If you have serial output - set the wifi via serial, then you should be able to use web-interface
by Oxyandy
06 May 2018, 03:53
Forum: ESP Easy: General Discussion
Topic: Custom firmware problem
Replies: 28
Views: 4159

Re: Custom firmware problem

Did you do a clean before re/compile ?
by Oxyandy
04 May 2018, 12:48
Forum: ESP Easy: General Discussion
Topic: Response browser time?
Replies: 5
Views: 1080

Re: Response browser time?

The other option for compiling is platformIO via Atom
by Oxyandy
04 May 2018, 00:00
Forum: ESP Easy: General Discussion
Topic: Using a ESPEasy as WiFi extender?
Replies: 5
Views: 1758

Re: Using a ESPEasy as WiFi extender?

An antenna is a great idea.
An extra access point made from an old router is maybe the easiest.
An ESP module can even be made into an access point with special firmware, but can not beat a proper one
by Oxyandy
02 May 2018, 12:52
Forum: ESP Easy: General Discussion
Topic: Response browser time?
Replies: 5
Views: 1080

Re: Response browser time?

Please try 0502, the latest revision and report back, huge improvements has just been made.
https://github.com/letscontrolit/ESPEasy/releases
by Oxyandy
28 Apr 2018, 07:51
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

Hi Albertus, As I said "Any questions, please open a fresh topic" I have no experience with "Openhab" I use "Domoticz" for simple data logging & some complex rules for alerts for alarm / fault situations I can help with general questions about Sonoff Basic units, but again "New Topic" thanks Had you...
by Oxyandy
27 Apr 2018, 03:24
Forum: ESP Easy: General Discussion
Topic: Automated Reboot Option ?
Replies: 2
Views: 766

Re: Automated Reboot Option ?

danielo111 the solution provided by arion_p will do exactly as you ask however,
it shouldn't be a problem, recent releases have Wifi connectivity issues & those problems are being worked on..
You could post an Issue over on Github or try an older firmware
by Oxyandy
26 Apr 2018, 05:31
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

Albertus, this will be useful if you still need to get up and working.
There is no 'one config' suits all, we all need different things.
https://www.letscontrolit.com/wiki/index.php/ESPEasy
Any questions, please open a fresh topic
thanks
by Oxyandy
21 Apr 2018, 08:59
Forum: ESP Easy: General Discussion
Topic: Uptime... Clarification
Replies: 2
Views: 533

Re: Uptime... Clarification

Thanks
I know it seems like an obvious question, but I just need the clarification
Cheers
by Oxyandy
21 Apr 2018, 07:49
Forum: ESP Easy: General Discussion
Topic: Uptime... Clarification
Replies: 2
Views: 533

Uptime... Clarification

Code: Select all

2431014 : WD   : Uptime 41 ConnectFailures 0 FreeMem 19144
Question is uptime how long the ESP has been UP without rebooting.. Nothing to do with WiFi connection time ?
Thanks
by Oxyandy
19 Apr 2018, 00:50
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Excessive Reporting Bug

A fresh firmware flash, NTP, Wifi connection, DHCP, Domoticz MQTT controller a switch with send boot state, not inverted, internal pull up ticked Nothing else needed to replicate. The point this 'excessive reporting bug' was introduced Jumper cable between GPIO14 & GND, no need to touch the jumper S...
by Oxyandy
18 Apr 2018, 18:36
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

No problems Grovkillen ! These bugs are resource hogs I am sure, their impact can cause roll on effects, such as Wifi disconnects, reporting over loads & even reboots.. While active in current releases I am sure it makes debugging 'other issues' harder too.. I have several more bugs I have noticed t...
by Oxyandy
18 Apr 2018, 17:44
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

Oh nice, first firmware I try is: ESP_Easy_mega-20180112_normal_ESP8266_1024.bin Serial output from removing a jumper cable between GPIO14 & GND - wait - Then replacing it SW : Switch state 0 Output value 0 EVENT: FULL_Tray_2#Switch=0.00 SW : Switch state 1 Output value 1 EVENT: FULL_Tray_2#Switch=1...
by Oxyandy
18 Apr 2018, 17:31
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

And so I backed tracked the first bug... The GPIO14 showing wrongly all started in Dev_11, Dev_10 & older firmwares older work just fine.. Next bug to backtrack, is the excessive reporting Serial output from removing a jumper cable between GPIO14 & GND - wait - Then replacing it SW : Switch state 0 ...
by Oxyandy
07 Apr 2018, 07:54
Forum: ESP Easy: General Discussion
Topic: Firmware releases
Replies: 8
Views: 1563

Re: Firmware releases

"Don't fix what aint broke.." If it works as you need now, then why upgrade ? And for the most part, you should be able to upgrade as we covered with OTA, if a reason to upgrade exists ;) And if you must.. Be careful though, as the newer release become padded with fluff... that the size doesn't exce...
by Oxyandy
07 Apr 2018, 07:44
Forum: ESP Easy: General Discussion
Topic: Create backup of the current ESP8266 flash
Replies: 7
Views: 4381

Re: Create backup of the current ESP8266 flash

I like it, I use 'pre-configured' back-ups all the time too.. I setup one ESPeasy Firmware, preconfigured with all my favourite settings defined to a static IP 192.168.0.200, after flashing I know exactly where to find it http://192.168.0.200 A few minor edits like: Pump_0 to Pump_8 IP 192.168.0.200...
by Oxyandy
02 Apr 2018, 10:34
Forum: ESP Easy: General Discussion
Topic: ESP Wifi Gone after saving settings
Replies: 12
Views: 1662

Re: ESP Wifi Gone after saving settings

https://www.itead.cc/wiki/PSF-B85
Yep 8285...
ESP_Easy_mega-20180402_normal_ESP8285_1024.bin listed as 608K in size.
Ok watching from side lines
by Oxyandy
02 Apr 2018, 10:26
Forum: ESP Easy: General Discussion
Topic: ESP Wifi Gone after saving settings
Replies: 12
Views: 1662

Re: ESP Wifi Gone after saving settings

Bit more info plz, hardware by ? ESp chip 8266? Firmware version ?
Ta
by Oxyandy
02 Apr 2018, 09:14
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

Great your first successful OTA update ? awesome.. To test the error you do need to try & change something tiny in the config... Then click Submit, it is at this point you 'may' see the error writing config again.. (Actually changing nothing, but simply click "Submit" should work too) At the moment ...
by Oxyandy
02 Apr 2018, 08:41
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

Me too, OTA failed time after time.. Some help here, I made an initial uploader https://github.com/letscontrolit/ESPEasy/issues/1190 Any questions welcome before you try... I want it to be quick & painless for you ;) On the page above you are looking for Initial_Firmware_Uploader_Sonoff_1M.zip Initi...
by Oxyandy
02 Apr 2018, 01:52
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

It could be done via OTA Firmware updating... Just a few clicks, to change from firmware you are using now to the one you had the problem with. this way, after you have possibly confirmed bug has returned, you could very quickly restore the working release without losing any settings. And again: Jus...
by Oxyandy
02 Apr 2018, 01:47
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

I flashed my Sonoff with the 20180306 firmware and when I configure the device I get this error message: FS : Error while reading/writing config.dat in 794 I know this might be painful for you Hans65, but if you no longer see this bug.... Could you please... Reflash the 20180306 firmware & confirm ...
by Oxyandy
02 Apr 2018, 01:21
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

hans65 wrote:
01 Apr 2018, 15:24
But before I could install the build 20180221 I've had to install the R148 version
I expect firmware saw this change from pre-V2 to above V2 and the firmware issued a reset command,
wiping out all settings, that is possibly the difference.
by Oxyandy
02 Apr 2018, 01:17
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

Hi Grovkillen I've updated 50+ units is this with the absolute most recent releases ? Has only every happened to me with the last few releases.. I can not say if it has been resolved (the writing config error) with most recent release as I am still back tracking bugs. I am not flashing most recent f...
by Oxyandy
01 Apr 2018, 13:41
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

After I had troubles I did a full erase, manually setup everything again & it still happened, it was suspected my device was failing.. I rolled back to older firmware, the issue was gone, upgraded again, the issue returned, even with the minimal latest firmware ! I attempt to edit something like rul...
by Oxyandy
01 Apr 2018, 11:56
Forum: ESP Easy: General Discussion
Topic: Error writing config.dat
Replies: 18
Views: 2787

Re: Error writing config.dat

I have no time to go into detail or even pay attention, but I had this & there is nothing wrong with your sonoff,
roll back to an earlier firmware & you will see the error is gone
by Oxyandy
01 Apr 2018, 01:34
Forum: ESP Easy: General Discussion
Topic: Espeasy with momentary switches / impulse (latching) relay
Replies: 4
Views: 1252

Re: Espeasy with momentary switches / impulse (latching) relay

on Button#value do if [Button#value] = 0 publish domoticz/in,{"idx":26,"nvalue":0,"svalue":"0"} else publish domoticz/in,{"idx":26,"nvalue":0,"svalue":"1"} endif endon Will not make ESP module do anything, but will report, idx matching what you need in dashboard add GPIOx, 0 or GPIOx,1 to make some...
by Oxyandy
01 Apr 2018, 00:13
Forum: ESP Easy: General Discussion
Topic: Espeasy with momentary switches / impulse (latching) relay
Replies: 4
Views: 1252

Re: Espeasy with momentary switches / impulse (latching) relay

These have been set in Devices ?
Button#value <- what is it ? What GPIO is it using ?
GPIO14 has been defined in Devices ? (What is it's name there ?)
by Oxyandy
01 Apr 2018, 00:04
Forum: ESP Easy: General Discussion
Topic: RSSI system variable
Replies: 10
Views: 2280

Re: RSSI system variable

Excellent tip, thanks TD-er
by Oxyandy
31 Mar 2018, 11:57
Forum: ESP Easy: General Discussion
Topic: ESP Easy Webdumper
Replies: 59
Views: 10475

ESP Easy Webdumper & Performance Tool

Excellent, I was awake for over 36 hours configuring my 'test environment' - I have an older firmware which has not yet failed, so I have a base line, a few hours 'power sleep' and I am back. Only 2 firmware versions higher & I see 'bad behaviour' - very pleased, but so much more to do before I trac...
by Oxyandy
31 Mar 2018, 03:30
Forum: ESP Easy: General Discussion
Topic: ESP Easy Webdumper
Replies: 59
Views: 10475

Re: ESP Easy Webdumper

Hi Grovkillen,
An idea, the total time taken !
This could be used as a measure of web-server performance to measure differences in firmwares
Cheers
by Oxyandy
30 Mar 2018, 18:53
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

Yes, no problem TD-er, I have a plan and everything is coming together very nicely..
Which reminds me I have several things to do if I want faster progress.
I had better stop everything I am doing now and focus on those menial tasks..
Thank for the distraction @3.51AM
I want this done...
by Oxyandy
30 Mar 2018, 00:54
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

I have been building up a 'tool box' of tools, first - 'working OTA Sonoff firmware updating', tick done. second - a full set of all firmwares since inspection and each's source-code, tick done. third - modify all those firmwares so they are also fully compatible with OTA Sonoff firmware updating, t...
by Oxyandy
29 Mar 2018, 10:22
Forum: ESP Easy: Hardware
Topic: Sonoff Basic - AP not apearing on first boot with pre-built BIN
Replies: 59
Views: 33973

Re: Sonoff Basic - AP not apearing on first boot with pre-built BIN

mkriek wrote:
01 Mar 2018, 03:44
boards say Dec/2017
Does it say R2.0 on them ?

Thanks
by Oxyandy
28 Mar 2018, 18:56
Forum: ESP Easy: General Discussion
Topic: Notifications by Email, the good old days
Replies: 5
Views: 984

Re: Notifications by Email, the good old days

A todo to add proper description of email notification is pending on the ESPeasy wiki documentation Slack. Don't forget this is all done in spare time by only a handful of developers and enthusiasts. Often with a full-time job and a family. Just thought it deserved a mention as I expect your guys p...
by Oxyandy
28 Mar 2018, 15:09
Forum: ESP Easy: General Discussion
Topic: Notifications by Email, the good old days
Replies: 5
Views: 984

Re: Notifications by Email, the good old days

Ah ok, so it was just there as a tease, thanks for the response
by Oxyandy
28 Mar 2018, 14:48
Forum: ESP Easy: General Discussion
Topic: Disable/enable Devices via commands?
Replies: 11
Views: 1929

Re: Disable/enable Devices via commands?

Sorry my first post wasn't so clear, I was about to leave to do a job, anyway my thing is, I have a pump watering a system with plants & I am away.. Before I left I set-up a back up reservoir in case anything happens to the first.. Well no point in the first running if it's close to empty, and the s...
by Oxyandy
28 Mar 2018, 14:01
Forum: ESP Easy: General Discussion
Topic: Notifications by Email, the good old days
Replies: 5
Views: 984

Re: Notifications by Email, the good old days

BTW.. the "?" -- "Notifications" help button takes us to a 'brag' page about a project..
https://www.letscontrolit.com/wiki/inde ... ifications
I know, there is always lots to get done, but it needs mentioning.
Cheers
by Oxyandy
28 Mar 2018, 13:52
Forum: ESP Easy: General Discussion
Topic: Notifications by Email, the good old days
Replies: 5
Views: 984

Notifications by Email, the good old days

This is a screenshot from old firmware v2.0.0-dev4 - using it for debug purposes.
How do I set the senders password, tried to find info on it online without luck, thanks !
v2.0.0-dev4_email.jpg
v2.0.0-dev4_email.jpg (75.61 KiB) Viewed 984 times
by Oxyandy
28 Mar 2018, 13:46
Forum: ESP Easy: General Discussion
Topic: Save/restore ESPEasy configuration: prob/WA
Replies: 5
Views: 874

Re: Save/restore ESPEasy configuration: prob/WA

I found the cause of why OTA has not been working on Sonoffs ! I have made a custom uploader & a full set of every ESPeasy firmware I could find.. as DOUT.. Now able to downgrade & upgrade OTA no problems anymore.. :D Looking for difference in behaviour between each firmware release to see which had...
by Oxyandy
27 Mar 2018, 04:46
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

moebius wrote:
26 Mar 2018, 16:34
GIT version: v2.0.0-dev12
Oh, I like it, it looks & drives just the recent versions I started with..
Time to put it on test, log data & test how it behaves, again thanks.
by Oxyandy
27 Mar 2018, 04:05
Forum: ESP Easy: General Discussion
Topic: Disable/enable Devices via commands?
Replies: 11
Views: 1929

Re: Disable/enable Devices via commands?

You can create rules to turn them on at a certain time & off at a certain time ! See Wiki of commands https://www.letscontrolit.com/wiki/index.php/ESPEasy_Command_Reference https://www.letscontrolit.com/wiki/index.php/Tutorial_Rules You are looking for On Clock#time I would be interested in a comman...
by Oxyandy
26 Mar 2018, 21:47
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

Tasmota firmware works fine 99.9%, but the timer cycles are not internal & are dependant on a back-end such as Domoticz to fire the cycles & then Domoticz rules to then stop the pump.. And of course a constant WiFi signal... The 'Tasmota way' simply has more points of failure than something with a c...
by Oxyandy
25 Mar 2018, 23:20
Forum: ESP Easy: General Discussion
Topic: ESPeasy Mega running on Sonoff Basic - Bad Behaviour
Replies: 68
Views: 12942

Re: ESPeasy Mega running on Sonoff Basic - Bad Behaviour

Also, there are older (proven) versions of espeasy - why you have to use a bleeding edge version in a production environment? So does this mean you are posting to suggest to me a particular firmware that I should try ? Something which I could provide Developers feedback on, so changes can be back-t...
by Oxyandy
25 Mar 2018, 11:06
Forum: ESP Easy: General Discussion
Topic: Notification by gmail
Replies: 5
Views: 1191

Re: Notification by gmail

My solution was to use one of the 4 email address supplied by my by ISP
to send the email using port 25 to my gmail account..
So my IoT devices have their own 'sending email' address
Hope this helps