Search found 38 matches
- 18 Jun 2018, 19:53
- Forum: ESP Easy: General Discussion
- Topic: Remote Access
- Replies: 13
- Views: 6939
Re: Remote Access
I don't have this function "Client IP filtering" on my installed firmware. I'm using v2.0-20180221
- 09 Jun 2018, 08:35
- Forum: ESP Easy: General Discussion
- Topic: Help - update bricked S20
- Replies: 43
- Views: 25665
Re: Help - update bricked S20
I doubt, the S20 is bricked, I have also a S20 and had some problems in the past.
- If you working with Windows, check the to see the port, where the adapter is connected
- Go back to the R_148 version, flash your S20. If you don't have the correct port (normally is 3 or 4) try the other one
Hans
- If you working with Windows, check the to see the port, where the adapter is connected
- Go back to the R_148 version, flash your S20. If you don't have the correct port (normally is 3 or 4) try the other one
Hans
- 16 Apr 2018, 12:13
- Forum: ESP Easy: General Discussion
- Topic: Remote Access
- Replies: 13
- Views: 6939
Remote Access
Hi to all
I have a FritzBox 7390 and would like to have remote access to my sonoff switch. I've configured everything in my FritzBox but unfortunately remote access is not working.
I've also install a webcam and this is perfect working. Is it not possible for sonoff devices?
Thanks
Hans
I have a FritzBox 7390 and would like to have remote access to my sonoff switch. I've configured everything in my FritzBox but unfortunately remote access is not working.
I've also install a webcam and this is perfect working. Is it not possible for sonoff devices?
Thanks
Hans
- 08 Apr 2018, 08:17
- Forum: ESP Easy: General Discussion
- Topic: Status of the switch when the power is turned off
- Replies: 6
- Views: 5763
Re: Status of the switch when the power is turned off
Have you tried with a dummy variable?
- 06 Apr 2018, 23:52
- Forum: ESP Easy: General Discussion
- Topic: Firmware releases
- Replies: 8
- Views: 5291
Firmware releases
I was wondering, on my Sonoff S20 I have Release V2.0-xxxxx installed. Is it possible to install a Release mega-xxxxxx on it
or would I have after the upgrade of the firmware problems using the device?
or would I have after the upgrade of the firmware problems using the device?
- 04 Apr 2018, 17:18
- Forum: ESP Easy: General Discussion
- Topic: Question about Status
- Replies: 6
- Views: 4415
Re: Question about Status
AndrewJ you are a genius, it works thanks
- 04 Apr 2018, 16:55
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy control - Android APP
- Replies: 14
- Views: 18469
Re: ESPEasy Control - Android APP
Thanks and sorry I wasn't reading correctly. After upgrade to 20180319 everything is working fine again.
- 04 Apr 2018, 15:37
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy control - Android APP
- Replies: 14
- Views: 18469
Re: ESPEasy Control - Android APP
no nothing I'm using 2018306
- 04 Apr 2018, 15:10
- Forum: ESP Easy: General Discussion
- Topic: Question about Status
- Replies: 6
- Views: 4415
Re: Question about Status
Sorry but I don't have necessary tools to measure GPIO. I think with the previous firmware I did not have had this problem.
Currently I'm on 20180306
Currently I'm on 20180306
- 04 Apr 2018, 13:35
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy control - Android APP
- Replies: 14
- Views: 18469
Re: ESPEasy Control - Android APP
nop only blank screen tested with firefox and edge
- 04 Apr 2018, 10:53
- Forum: ESP Easy: General Discussion
- Topic: Question about Status
- Replies: 6
- Views: 4415
Question about Status
In the log file I see the status of my switch device changes ever second, is this normal?
- 04 Apr 2018, 09:31
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy control - Android APP
- Replies: 14
- Views: 18469
Re: ESPEasy Control - Android APP
Is the new version also available on dropbox? I can't download it on Amazon
Edit: I got it but status is still grey, before I updated the firmware it was green. Any solution for this?
Thanks
Hans
Edit: I got it but status is still grey, before I updated the firmware it was green. Any solution for this?
Thanks
Hans
- 04 Apr 2018, 09:25
- Forum: ESP Easy: General Discussion
- Topic: Help - update bricked S20
- Replies: 43
- Views: 25665
Re: Help - update bricked S20
Do you see your S20 in the Wifi environment? If not, download the R148 firmware. I've had the same problem and the R148 fix it.
- 02 Apr 2018, 22:50
- Forum: ESP Easy: General Discussion
- Topic: Notification variable
- Replies: 10
- Views: 5825
Re: Notification variable
Unfortunately this version is not working:
Notify,1,Power Switch is on
so I went back to my old one: Notify,1,Power_Switch_is_on
and keep it this way. This works for me and I can life whit it.
Thanks anyway for your help and thanks to all for a great firmware, I love it
Notify,1,Power Switch is on
so I went back to my old one: Notify,1,Power_Switch_is_on
and keep it this way. This works for me and I can life whit it.
Thanks anyway for your help and thanks to all for a great firmware, I love it
- 02 Apr 2018, 13:28
- Forum: ESP Easy: Projects / Applications
- Topic: ESPeasy control - Android APP
- Replies: 14
- Views: 18469
Re: ESPEasy Control - Android APP
I was wondering, is there an other Android app around? I used this one here but since the update from the firmware to version 20180306 the status display is not working anymore. On/Off is fine it is only the status color.
- 02 Apr 2018, 12:27
- Forum: ESP Easy: General Discussion
- Topic: Notification variable
- Replies: 10
- Views: 5825
Re: Notification variable
Thanks changed it to Outlet. How about variables like the Sw12, is it possible to forward the value to a notification?
I tried %Sw12% but I see exactly this and not the value of 1 or 0
I tried %Sw12% but I see exactly this and not the value of 1 or 0
- 02 Apr 2018, 11:43
- Forum: ESP Easy: General Discussion
- Topic: Notification variable
- Replies: 10
- Views: 5825
Re: Notification variable
Yes I've named one of the devices GPIO12 is this wrong?
- 02 Apr 2018, 11:21
- Forum: ESP Easy: General Discussion
- Topic: Notification variable
- Replies: 10
- Views: 5825
Re: Notification variable
Thanks for your advise, I'll try and let you know. Have you any idea about device name? in the log file it shows: GPIO 12
but in the device it is written: GPIO12
I changed now the rule from: if [GPIO12#Sw12] to if [GPIO 12#Sw12] let you also know about the effect.
but in the device it is written: GPIO12
I changed now the rule from: if [GPIO12#Sw12] to if [GPIO 12#Sw12] let you also know about the effect.
- 02 Apr 2018, 08:59
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13125
Re: Error writing config.dat
Hey Andy,
This was quick and easy and guess what, everything works fine the read/write error is gone
Thanks a lot for your help
Hans
This was quick and easy and guess what, everything works fine the read/write error is gone
Thanks a lot for your help
Hans
- 02 Apr 2018, 08:30
- Forum: ESP Easy: General Discussion
- Topic: Notification variable
- Replies: 10
- Views: 5825
Notification variable
I found here as well some strange saltus, if I write this in the rules: if [GPIO12#Sw12]=1 Notify 1, Power Switch is on else Notify 1, Power Switch still %Sw12% please check endif The log file shows me as name: GPIO 12 so the else part will be executed instead of the first part, because the status o...
- 02 Apr 2018, 08:21
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13125
Re: Error writing config.dat
Hi Andy,
Yes I can do dat, but I'm not sure, if I could do it today. I'll let you know about the result, in the past, I was never able to do an update via OTA I always got a failed.
I'll try first OTA and if no success, then by USB
Hans
Yes I can do dat, but I'm not sure, if I could do it today. I'll let you know about the result, in the past, I was never able to do an update via OTA I always got a failed.
I'll try first OTA and if no success, then by USB
Hans
- 01 Apr 2018, 15:24
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13125
Re: Error writing config.dat
Have had the same problem with build 20180304b so I went back to build 20180221 now it works fine like before. But before I could install the build 20180221 I've had to install the R148 version because when I tried to flash direct from 20180304b to 20180221 I could not see the device in my wifi envi...
- 01 Apr 2018, 10:44
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13125
Re: Error writing config.dat
It is very strange, I found an old config.dat file on my laptop, I've imported this and everything worked fine, the error was gone.
Then I restarted my device and now I don't have any connection to it. I think, there is something wrong with this device.
Then I restarted my device and now I don't have any connection to it. I think, there is something wrong with this device.
- 01 Apr 2018, 09:31
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13125
Re: Error writing config.dat
Thanks for your quick response. I executed this command - made a reboot but still same error
- 01 Apr 2018, 09:19
- Forum: ESP Easy: General Discussion
- Topic: Error writing config.dat
- Replies: 18
- Views: 13125
Error writing config.dat
Hi
I flashed my Sonoff with the 20180306 firmware and when I configure the device I get this error message:
FS : Error while reading/writing config.dat in 794
Is there anything I could do?
I flashed my Sonoff with the 20180306 firmware and when I configure the device I get this error message:
FS : Error while reading/writing config.dat in 794
Is there anything I could do?
- 30 Mar 2018, 13:19
- Forum: ESP Easy: General Discussion
- Topic: Notification variable
- Replies: 10
- Views: 5825
Notification variable
I have a question about variable. I would like to send a notification like this: if [GPIO#Sw12]=1 Notify 1, Power Switch is on else Notify 1, Power Switch still %Sw12% please check endif but in the email, I don't see this text. Is it possible to create a variable like: status="Power Switch stil...
- 29 Mar 2018, 17:26
- Forum: ESP Easy: General Discussion
- Topic: Library import
- Replies: 1
- Views: 1817
Library import
Hi,
I was wondering, is there a way to import a library (FauxmoESP) into a bin file? I'm currently using build v2.0-20180209
Thanks
Hans
I was wondering, is there a way to import a library (FauxmoESP) into a bin file? I'm currently using build v2.0-20180209
Thanks
Hans
- 25 Mar 2018, 22:32
- Forum: ESP Easy: General Discussion
- Topic: Notification by gmail
- Replies: 5
- Views: 4168
Re: Notification by gmail
awesome!!!
thanks a lot works perfect
thanks a lot works perfect
- 25 Mar 2018, 14:52
- Forum: ESP Easy: General Discussion
- Topic: Notification by gmail
- Replies: 5
- Views: 4168
Re: Notification by gmail
Thanks for the information. I've tried smtp2go set up an account but unfortunately I'm still getting an error in the log file. my setting on the notification is: Domain: www.smtp2go.com (tried as well smtp2go.com) Server: mail.smtp2go.com Port: 2525 (tried as well 25) plus user name and pw created o...
- 25 Mar 2018, 10:46
- Forum: ESP Easy: General Discussion
- Topic: Notification by gmail
- Replies: 5
- Views: 4168
Notification by gmail
Hi
could somebody give me some advise how to configure the notification part, to send a email by using gmail? Or is there an other provider to send it?
Thanks
Hans
could somebody give me some advise how to configure the notification part, to send a email by using gmail? Or is there an other provider to send it?
Thanks
Hans
- 23 Mar 2018, 21:40
- Forum: ESP Easy: General Discussion
- Topic: Sonoff S20 not working with EspEasy_Mega?
- Replies: 8
- Views: 6372
Re: Sonoff S20 not working with EspEasy_Mega?
Did you made a firmware update or did you flashed the 304b build? The R148 worked always perfect for me
- 23 Mar 2018, 17:44
- Forum: ESP Easy: General Discussion
- Topic: Sonoff S20 not working with EspEasy_Mega?
- Replies: 8
- Views: 6372
Re: Sonoff S20 not working with EspEasy_Mega?
Thanks for all the information. I've tried build 20180316 in version: 1024_dout, esp8266_1024, esp8285_1024 non of them worked. I went back to build 20180206 version: esp8266_1024 worked Then I tried a firmware update to build 20180209 version: esp8166_1024 failed I flashed then the device with this...
- 22 Mar 2018, 14:43
- Forum: ESP Easy: General Discussion
- Topic: Sonoff S20 not working with EspEasy_Mega?
- Replies: 8
- Views: 6372
Re: Sonoff S20 not working with EspEasy_Mega?
Thanks for your answer. What is a dout build? Could you give me more information about it?
Edit: found the information. No I never used this version
Edit: found the information. No I never used this version
- 22 Mar 2018, 09:45
- Forum: ESP Easy: General Discussion
- Topic: Sonoff S20 not working with EspEasy_Mega?
- Replies: 8
- Views: 6372
Sonoff S20 not working with EspEasy_Mega?
Hi to all I have a sonoff S20 power switch with R148 Firmware installed. According to the main info there is a Flash Size:4096 kB I have installed the 1024 version with no problem. Then I've tried to install the esp_easy_mega-20180320 and the esp_easy_v2.0-20180316 in both version, 1024 and 4096 Whe...
- 22 Mar 2018, 09:29
- Forum: ESP Easy: General Discussion
- Topic: Time power on
- Replies: 4
- Views: 4213
Re: Time power on
Thanks for the help, works fine now
Hans
Hans
- 19 Mar 2018, 21:42
- Forum: ESP Easy: General Discussion
- Topic: Time power on
- Replies: 4
- Views: 4213
Time power on
Sorry I have an other question. I'm trying to power on a switch and turn it off on a specific time. I've created a device and a rule but it is not working. Is it only possible to change it by using a webbrowser? If I use this command: http://<Dev IP>/control?cmd=GPIO,12,1 it works fine Thanks for th...
- 19 Mar 2018, 18:42
- Forum: ESP Easy: General Discussion
- Topic: Amazon Echo dot
- Replies: 4
- Views: 6154
Re: Amazon Echo dot
I could actually emulate a Wemo Switch with some firmware and was thinking, there is also a device like this to emulate with this firmware. I would only need a smart home device.
- 19 Mar 2018, 17:04
- Forum: ESP Easy: General Discussion
- Topic: Amazon Echo dot
- Replies: 4
- Views: 6154
Amazon Echo dot
Hi,
I'm new here and I was wondering, is it possible to use a sonoff 20 with ESPEasy firmware with a Amazon echo dot? I've flashed it but I can't see it on the Echo dot app
Thanks
Hans
I'm new here and I was wondering, is it possible to use a sonoff 20 with ESPEasy firmware with a Amazon echo dot? I've flashed it but I can't see it on the Echo dot app
Thanks
Hans