Let's Control It

TungstenE2

managed to controll my heat pump using the HTTP commands below: commad syntax: http://<ESP IP address>/control?cmd=MitsubishiHP,power,ON samples: http://192.168.178.107/control?cmd=MitsubishiHP,temperature,20 http://192.168.178.107/control?cmd=MitsubishiHP,power,ON http://192.168.178.107/control?cmd...

TungstenE2

nice link using the plugin:
https://community.openhab.org/t/mitsubi ... p/91765/16

TungstenE2

@Eisbahn did you manage to controll the plugin via MQTT?

By now I only managed to receive status using MQTT in FHEM, but I would also like to controll the heat pump using MQTT.

TungstenE2

see link: https://github.com/letscontrolit/ESPEasy/issues/3492

TungstenE2

see issue:
https://github.com/letscontrolit/ESPEasy/issues/3272

TungstenE2

just got my ESP32 cam 2 days ago. In general I really like it, and I think there might be some nice project ideas coming up. What I currently do not like, the version I purchased has no USB like D1 mini, so power is an issue. Connecting external antenna is a bit tricky. No nightview, as not IR LED a...

TungstenE2

please see this issue:
https://github.com/letscontrolit/ESPEasy/issues/2343

TungstenE2

according to this thread people got it working, but with slightly different setup

https://forum.fhem.de/index.php/topic,7 ... msg1027079

TungstenE2

I want the D1 mini to connect via serial to the HM-MOD-UART shield and send to FHEM controller.

TungstenE2

would P087 work?

https://espeasy.readthedocs.io/en/lates ... #p087-page

TungstenE2

thx, so which serial device plugin in normal build is recommended to be used for this?

TungstenE2

I could think of a generic plugin to get the cam working as cam settings are done via the frontend of the cam.
Would this mean 2 webservers? hm...

TungstenE2

Are there any plans or activities for an ESPeasy plugin to support ESP32-cam?

TungstenE2

Hi all,

I have eQ-3 HM-MOD-UART-AW-SH-2 with D1 mini using mega-20200721

Set up 'Communication - Serial Server' device.

The HM-MOD-UART-AW-SH-2 is connected via connection shield, see pics.

How to set up for swapped TX/RX communcation?

thx

TungstenE2

thx, this fixed the issue. So old information in forum on GPIO-2 (D4) output to low was wrong. It has to be high.

TungstenE2

Okay, strange. I also tried to create new rules with new engine but always got an error for the name, but no detailed info about what was wrong with the name. Tried to search the wiki but no solution found. So this issue is fixed for me and I will stay with old rules engine. But the original issue w...

TungstenE2

Hi all

how to disable blue onboard LED on D1 mini?

I already set GPIO-2 (D4) output to low and set wifi LED option to none, but LED is still on after reboot.

20200426 testing

Any advice?

TungstenE2

Bingo!

Rules Settings/Old Engine was disabled.

This caused Rules to disappear and destroy Rules page.

Is this a bug or a feature?

TungstenE2

all settings and devices are still available and working.
Only rules are gone. Also rules page looks strange. Please see issue with included screenshots.
https://github.com/letscontrolit/ESPEasy/issues/3081

TungstenE2

Hi all, I found my chicken door not working last night. This morning I was investigating and it seems like all rules are gone. It was working yesterday morning fine and I did not do any changes to the rules. Any idea how this can happen? Seems like the D1 mini reboots sometimes by itself. Can this c...

TungstenE2

created issue: https://github.com/letscontrolit/ESPEasy/issues/3080

TungstenE2

Hi all, why is setting up MQTT on ESPeasy so complicated compared to Tasmota? In Tasmota I was done in 2 Min. In ESPeasy there are several MQTT options in Protocol with several settings. I choose HomeAssistant MQTT, but even after several attemts I am only able to retrieve data in FHEM as MQTT2_devi...

TungstenE2

I do not believe in power-loss as powered by AC adapter.

Need to keep an eye on it.

The wifi was disconnected about 24hrs ago, but reboot about 17hrs ago, so in the middle of the night.
Wifi reconnected about 5hrs ago.

TungstenE2

Connection Failure Threshold: 0 and I am already on mega-20200426

Vendor: 0xC2

Any other ideas?

TungstenE2

Hi, I am not talking about a reboot of the D1 mini, but just loosing wifi signal. So my assumption is, that espeasy should work fully (incl rules) once wifi is lost and NTP time was successfull set while wifi was available. But I just see that the uptime is 13hrs, so it must have rebooted last night...

TungstenE2

Hi all, I control my chicken door with espeasy and some rules. I was always under the assumption that wifi is only needed after boot in oder to get NTP time and for the normal operations espeasy is working autonomously. But it happened in the last weeks twice that after repeater was disconneted rule...

TungstenE2

correction, as the cable did not fit the connector.

https://www.ebay.de/itm/80x-SPHD-001T-P ... 3852709397

TungstenE2

thx, I already saw that link. Cable price is normal, but shipping is very expensive to Germany. I ordered: https://www.ebay.de/itm/JST-PH-2-0mm-Stecker-Buchse-26AWG-Kabel-30cm-Connector-2-10-Pin-2-0mm/183607216953 https://www.ebay.de/itm/10x-PAP-05V-S-Stecker-Leitung-Platte-weiblich-PA-2mm-PIN-5-kon...

TungstenE2

will somebody update this page?
https://www.letscontrolit.com/wiki/index.php/Plugin93

TungstenE2

thx, solved, Advanced settings -> Serial port needs to be disabled
just discovered myself and found your reply afterwards....

TungstenE2

How to select TX and RX GPIOs? They are greyed out and can not be selected running Release ESP_Easy_mega-20200426_test_ESP8266_4M1M_VCC.bin

TungstenE2

Ok, found the latest plugin list:

https://espeasy.readthedocs.io/en/lates ... lugin.html

@Admins: please redirect old plugin list URL to latest URL.

TungstenE2

Hi all, I recently saw release updates for P093 - Mitsubishi Heat Pump plugin but I do not find any discussion or details in the forum or the plugin list. What is the plugin status? Missing in plugin list: https://www.letscontrolit.com/wiki/index.php/Official_plugin_list Documentation: https://espea...

TungstenE2

something I was searching for a very long time was a winch for the DC motor.

I recently designed one for other purpose, but may be this helps some else:
https://www.thingiverse.com/thing:4120449

TungstenE2

: 20180702_181320.jpg (372.84 KiB) Viewed 20615 times

: 20180627_194606.jpg (160.49 KiB) Viewed 20615 times

: 20180627_194927.jpg (217.73 KiB) Viewed 20615 times

: 20200318-120723.jpg (282.46 KiB) Viewed 20615 times

TungstenE2

Here comes an update of my project working now nearly 2 years. Realized with D1 mini and Wemos Motorshield. https://www.letscontrolit.com/wiki/index.php/WemosMotorshield Achivements: - door triggered by sunrise/sunset - 2 manual buttons to open/close door - intergartion with FHEM home automation - T...

TungstenE2

Hi Shardan, thx for sharing your thoughs. Currently I would plan to buy the following: Motorshield: https://de.aliexpress.com/item/32898563025.html Wemos D1: https://de.aliexpress.com/item/32758176555.html Also, the motorshield powers the Wemos D1. This means that you only have to power the motor sh...

TungstenE2

what kind of power supply do you use to power the Wemos D1 board over the Motorshield and the motors?

TungstenE2

You are referring to plugin P048_Motorshield_v2.ino which is in Status 'Testing', right?

https://www.letscontrolit.com/wiki/inde ... lugin_list

Raised a request to move status to 'Normal': https://github.com/letscontrolit/ESPEasy/issues/2717

TungstenE2

thx for all the details, but the motor link is not working. can you update? - which motor did you use? (stepper or normal DC) https://nl.aliexpress.com/item/32907886993.html?spm=a2g0s.9042311.0.0.27424c4dU1XzNl I used this motor, because the motorshield can only handle up to i believe 1.2 amps or so...

TungstenE2

Hi all, I have seen some post during the last years on different solutions on dosing pumps, but none of them with all details or final status. I would like to build a dosing pump for my fish tank in order to have fertilizer adding automated using Wemos D1 mini and ESPeasy. Dosing should be about 4ml...

TungstenE2

nice project, I have my chicken door operated with ESPeasy. My questions are: - which motor shield did you use? (link) - which motor did you use? (stepper or normal DC) - how did you configure the motor in ESPeasy? As the chicken feeder is not so precise, as I assume, I am planning for a dosing pump...

TungstenE2

sad to see that michael3 is not sharing his plugin with the Forum, after he got an answer. As he did not visit the Forum since his last answer he als did not get my PM.

TungstenE2

@kirelam: I am also very interesed in your setup, hardware and configuration. Would you mind to share this information (links, screenshots) with us?

I plan to build a dosing pump and struggle to find working hardware with ESPeasy.

thx

TungstenE2

sorry, I can not support on V2 version, but V1 version is still available and should work.

https://de.aliexpress.com/item/32920107053.html

TungstenE2

any news on this dosing pump plugin? can not find it in the plugin list.

TungstenE2

may be open issue here: https://github.com/letscontrolit/ESPEasy/issues

TungstenE2

may be check this:

https://www.letscontrolit.com/wiki/inde ... otorshield

https://hackaday.io/project/18439-motor ... rogramming

TungstenE2

any news?

TungstenE2

Hi team,

is there a process/roadmap when new plugins will be moved from testing to normal status? (eg P079)

https://www.letscontrolit.com/wiki/inde ... lugin_list

br

Search found 123 matches