Search found 116 matches
- 10 Feb 2017, 14:45
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
My Sonoffs have arrived and so I was able to create the final version of my solution. It involves Sonoff Basic programmed with EasyESP with GPIO-14 used to control the dimmer. It is attached to the ceiling lamp from IKEA http://www.ikea.com/pl/pl/catalog/products/00304493/ . Actually I have (on req...
- 09 Feb 2017, 21:58
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
My Sonoffs have arrived and so I was able to create the final version of my solution. It involves Sonoff Basic programmed with EasyESP with GPIO-14 used to control the dimmer. It is attached to the ceiling lamp from IKEA http://www.ikea.com/pl/pl/catalog/products/00304493/ . Actually I have (on requ...
- 08 Feb 2017, 09:26
- Forum: ESP Easy: Projects / Applications
- Topic: PWM output with automatic fade
- Replies: 12
- Views: 16943
Re: PWM output with automatic fade
Sure, PWM command has the last parameter, that defines time for fade:
/control?cmd=PWM,<gpio>,<level>,<fade_time>
/control?cmd=PWM,<gpio>,<level>,<fade_time>
- 01 Feb 2017, 21:06
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
OK, so Witty module is behaving really, really strange. Measured difference between VCNT and GND is changing, but the range is unbelievable: for GPIO-16: 2,35V-5,24V for GPIO-14: 1,93V-5,24V for GPIO-5: 1,95V-5,24V Even I have measured the voltage between VCC and GND and confirmed, this is 5,24V ind...
- 01 Feb 2017, 15:12
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
Was looking on the Witty schematic and looks to have some extra stuff on some GPIO's. You can see the assignment of pins here and D0 (GPIO-16) should not be used for anything: http://www.schatenseite.de/wp-content/uploads/2016/04/160422_witty_cloud_01-1.jpg Will test and let you know. Will also try...
- 01 Feb 2017, 12:14
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
I am absolutely not suggesting, there is anything wrong with your product. I have decided to go Forum route, as my issues might help someone in the future. I like the dimmer very much and I am sure, your suggestions will help me overcome the issues and have fully working solution. Will let you know ...
- 01 Feb 2017, 09:15
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
Than you. Will check tonight and also with another board. What I meant about the video, it shows that dimming works, only not as much as I expected. But maybe because of something unexpected, that is why I asked for advice. I can also try this separate I2C driver, if that is better than standalone E...
- 01 Feb 2017, 08:41
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
Have you seen my video?
- 01 Feb 2017, 07:49
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
Witty is a standard Esp8266 on a small breadboard.
I have connected VCC, GND and GPIO-16 to VCNT.
As for firmware, I am using version R147 RC8.
I have connected VCC, GND and GPIO-16 to VCNT.
As for firmware, I am using version R147 RC8.
- 01 Feb 2017, 00:06
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
I have purchased and received today MPDMv4 dimmers and put one into tests. All seem to be working fine, but there is one problem - dimming levels are not comparable with demo on YouTube. You can see the clip showing dimming adjustment from 100% to 50%, then to 5% and all the way to full and to minim...
- 30 Jan 2017, 15:13
- Forum: ESP Easy: Software
- Topic: Editing Sonoff SSID
- Replies: 5
- Views: 5734
Re: Editing Sonoff SSID
That is correct. However.....no matter if I edit this before uploading, or enter the details afterwards by having access to the Sonoff, and click submit, it does not change. In this example it does accept the name change for the Sonoff module Mod2, but not the SSID. http://i66.tinypic.com/hv1l6f.jp...
- 23 Jan 2017, 20:40
- Forum: ESP Easy: Projects / Applications
- Topic: MPDMv4 - Universal AC MAINS Dimmer Board usage
- Replies: 51
- Views: 52519
Re: MPDMv4 - Universal AC MAINS Dimmer Board usage
Would you be so kind and specify, what exactly (which modules) do I need to purchase in order to be able to control and dim 2 channels of ordinary 230V LED lights via ESP and Domoticz? I got a bit confused by Universal Board, EVO board, dimmer board, etc. So after watching the videos again, I unders...
- 05 Jan 2017, 22:19
- Forum: Staff Announcements forum
- Topic: ESP Easy development status
- Replies: 143
- Views: 243367
Re: ESP Easy development status
Thank you for all the work you did. It has been exactly what I have been looking for after getting serious about home automation.
Good luck
Good luck
- 04 Nov 2016, 08:18
- Forum: RFLink: Hardware Related discussions
- Topic: CC2500 - or equivalent for Ansluta?
- Replies: 7
- Views: 9364
Re: CC2500 - or equivalent for Ansluta?
As for the module, you need a real CC2500. Not one of the many fakes or mostly incompatibles. A search for the real CC2500 on aliexpress shows one for 2.37 and one for 1.93 euros. Hardly expensive... I have just asked for the benefit of us all, as the blog shows 2 other components I presume compati...
- 01 Nov 2016, 22:04
- Forum: RFLink: Hardware Related discussions
- Topic: CC2500 - or equivalent for Ansluta?
- Replies: 7
- Views: 9364
CC2500 - or equivalent for Ansluta?
I have seen, there is now a requirement for CC2500 to be used for connectivity to Ansluta devices. Does it mean, I can use Ansluta and Milight connection at the same time (pins seem to be overlaping - any way to move them?)? Also, I can see, on Aliexpress, they offer MD7105-SY (or A7105) claiming to...
- 15 Mar 2016, 21:23
- Forum: ESP Easy: Hardware
- Topic: Thermal printer as attachment for ESP8266?
- Replies: 2
- Views: 4370
Re: Thermal printer as attachment for ESP8266?
I have meant ESP Easy of course. In general, this should not be complicated to achieve, but I wonder if anyone tried.
- 15 Mar 2016, 16:22
- Forum: ESP Easy: Hardware
- Topic: Thermal printer as attachment for ESP8266?
- Replies: 2
- Views: 4370
Thermal printer as attachment for ESP8266?
I am thinking about connecting thermal printer (like the ones available below 30USD via aliexpress) to ESP8266 and using it for printing various messages. Has anyone tried this? As far as I understand, this is like printing to LCD/OLED screen.
- 07 Feb 2016, 22:46
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
If you have many devices in your network and you have an Android smartphone, you can use great app named Fing. It will detect all devices in your network. Works great for me.
And if you did not load WiFi settings, check, if ESP_0 AP is available and connect to it.
And if you did not load WiFi settings, check, if ESP_0 AP is available and connect to it.
- 03 Feb 2016, 22:10
- Forum: ESP Easy: Software
- Topic: MySensors goes ESP!!
- Replies: 91
- Views: 103909
Re: MySensors goes ESP!!
I have made a folder like this: C:\Tools\Arduino1.6.5.MySensors In that folder I have the following folders: - arduino-1.6.5-r5 (portable Arduino IDE with the ESP8266 package you also use) - Libraries - ESPEasyMySensors R001 (I downloaded the master from the github and renamed it to - ESPEasyMySens...
- 02 Feb 2016, 14:38
- Forum: ESP Easy: Projects / Applications
- Topic: My Built-in-wall domoticz switch + pir + barometer
- Replies: 17
- Views: 28538
Re: My Built-in-wall domoticz switch + pir + barometer
What you have posted: http://127.0.0.1:8080/json.htm?type=com ... cmd=Toggle is the operation that changes state of the switch in Domoticz and this does not make sense. It was just example, I of course insert my ESP IP address. Please check your email. It is not only about the address, but also abo...
- 02 Feb 2016, 14:21
- Forum: ESP Easy: Projects / Applications
- Topic: My Built-in-wall domoticz switch + pir + barometer
- Replies: 17
- Views: 28538
Re: My Built-in-wall domoticz switch + pir + barometer
What you have posted: http://127.0.0.1:8080/json.htm?type=command¶m=switchlight&idx=1&switchcmd=Toggle is the operation that changes state of the switch in Domoticz and this does not make sense. What you need to put in there is command that will tell ESP to perform operation on GPIO....
- 02 Feb 2016, 10:14
- Forum: ESP Easy: Projects / Applications
- Topic: My Built-in-wall domoticz switch + pir + barometer
- Replies: 17
- Views: 28538
Re: My Built-in-wall domoticz switch + pir + barometer
IP address has to be of your Easy ESP, not Domoticz.
- 29 Jan 2016, 20:52
- Forum: ESP Easy: Software
- Topic: MySensors goes ESP!!
- Replies: 91
- Views: 103909
Re: MySensors goes ESP!!
I do not know about ESPMySensors, but for regular ESPEasy, you need to name the folder exactly ESPEasy and not ESPEasy Rxx or ESPEasy-master like the downoladed zip file suggests.
- 29 Jan 2016, 14:17
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
it comes up and the old version number stand there! In the Settings are the old one now i have found the Problem i think: 1. when i flash the r070 with 4M(SPIFFS 3M) with the Flashertool (I have make it always with 512k (64k SPIFFS)) 2. Make the .bin File also with 4M(SPIFFS 3M) And now when i OTA ...
- 26 Jan 2016, 07:25
- Forum: ESP Easy: Projects / Applications
- Topic: QuinLED via ESP Easy?
- Replies: 15
- Views: 16960
Re: QuinLED via ESP Easy?
Welcome Quindor. As you know, I simply love your dimmer and the lua code. Being able to easily replace ESP inside, however, beat any specialized coding, that is why I have been looking for solution using Easy ESP. Hearing the bad part about refresh makes me sad, but maybe the community can come up w...
- 25 Jan 2016, 19:36
- Forum: ESP Easy: Projects / Applications
- Topic: Custom CSS
- Replies: 12
- Views: 13108
Re: Custom CSS
i uploaded the css. looks wonderful... +1 feature-request: what about not to upload every css, instead put in a link to a (home-/www-)server? (would be easyier to maintain more ESPs at the same time..) +1 on common source for custom CSS. With multiple modules, ability to point them all to a single ...
- 25 Jan 2016, 00:43
- Forum: ESP Easy: Projects / Applications
- Topic: QuinLED via ESP Easy?
- Replies: 15
- Views: 16960
Re: QuinLED via ESP Easy?
I have modified the script slightly, so it returns the result, if the ESP is active and sends via curl not telnet: commandArray = {} DomDevice = 'Dimmer Strip Test' IP = 'espip' Port = '80' GPIO = 4 function os.capture(cmd, raw) local f = assert(io.popen(cmd, 'r')) local s = assert(f:read('*a')) f:c...
- 24 Jan 2016, 22:53
- Forum: ESP Easy: Projects / Applications
- Topic: Feature request - Short pulses with PCF8574
- Replies: 1
- Views: 2886
Re: Feature request - Short pulses with PCF8574
+1 on this one. If we are nearing next stable release, it would be great to have consistent support for gpios, including the ones on extenders.
- 24 Jan 2016, 22:50
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
+1 for source code AND bin files on SourceForge. Athough I am running unstable releases now, being able to download and tinker with stable release seems quite important.
I would also welcome a roadmap for future direction of Easy ESP.
I would also welcome a roadmap for future direction of Easy ESP.
- 24 Jan 2016, 14:33
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
https://github.com/ESP8266nu/ESPEasy click on "download ZIP" Thanks i did new the different between stable and develop I download the library from the R048, and copy to library in my arduino setup I did download espeasy-master, set this in my project map open the easpeasy.ino change my se...
- 24 Jan 2016, 12:09
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
Where can i find R072 i like to test.. github, as always for non stable releases. We’ve found 7,085 repository results: https://github.com/search?utf8=%E2%9C%93&q=esp+&type=Repositories&ref=searchresults What is the good one? https://github.com/ESP8266nu/ESPEasy But I suppose, you shoul...
- 24 Jan 2016, 11:53
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
github, as always for non stable releases.Dylantje wrote:Where can i find R072 i like to test..
- 22 Jan 2016, 09:46
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
I have loaded R70 onto my bare ESP 12E without any issues from Arduino IDE. Then I wanted to upload the very same R70 onto it using OTA. The process went fine, ok has been shown, but the ESP has not rebooted itself. After waiting about 3 min, I have rebooted it manually and it is not running. I have...
- 22 Jan 2016, 06:41
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
Hi, supplement: until V068 i had all my ESP-12E flashed via "Generic ESP 8266 Module" and Flash Size "512KB (64KB SPIFFS)", that´s the only and one way it´s running and compiling. Now with OTA these generatet .bin files are not accepted. Hope it helps. Bernd Remember OTA is work...
- 21 Jan 2016, 19:16
- Forum: ESP Easy: Projects / Applications
- Topic: QuinLED via ESP Easy?
- Replies: 15
- Views: 16960
Re: QuinLED via ESP Easy?
Interesting idea. It might work as what you have written is adaptation of Quindor's script for EASY ESP. What I meant initially was moving the handling of the dimmer command onto plugin in tasks and getting rid of LUE script on controller as well, but your idea is also nice and does not require anyt...
- 21 Jan 2016, 16:46
- Forum: ESP Easy: Projects / Applications
- Topic: QuinLED via ESP Easy?
- Replies: 15
- Views: 16960
Re: QuinLED via ESP Easy?
Glad to hear, I am not the only one looking for simplicity. We could possibly move the logic of driving PWM on specific bebaviour in Domoticz to tasks as specificplugin, because logic stays constant - all that is being sent to ESP is change in PWM pulse depending on the Dimmer setting in controller....
- 20 Jan 2016, 14:39
- Forum: Introduce yourself
- Topic: Hello from Polnad ..
- Replies: 2
- Views: 2943
Re: Hello from Polnad ..
Welcome to the forum lowca
- 19 Jan 2016, 18:42
- Forum: ESP Easy: Projects / Applications
- Topic: QuinLED via ESP Easy?
- Replies: 15
- Views: 16960
Re: QuinLED via ESP Easy?
Yes, that is what I am doing now with original scripts.cherowley wrote:Hi!
What software will you be using to control the modules? Domoticz?
- 18 Jan 2016, 22:01
- Forum: ESP Easy: Projects / Applications
- Topic: QuinLED via ESP Easy?
- Replies: 15
- Views: 16960
QuinLED via ESP Easy?
Has anyone tried to recreate Quindor's QuinLED dimmer via ESP Eaysy? If you do not know Quindor's excellent and small solution, please check at: http://blog.quindorian.org/2015/04/esp8266-wifi-led-dimmer-part-8-of-x.html?m=1 . I have working modules, but I do not like lua scripts on my modules and I...
- 17 Jan 2016, 20:05
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
I am also very happy about software OTA upload. One question though - normally, Arduino IDE sketches contain initial configuration of device name, etc. What should be put there in order for the device to keep configuration after upload? The settings you define in espeasy.ino are the default values ...
- 17 Jan 2016, 19:13
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
I am also very happy about software OTA upload. One question though - normally, Arduino IDE sketches contain initial configuration of device name, etc. What should be put there in order for the device to keep configuration after upload?
- 16 Jan 2016, 01:39
- Forum: ESP Easy: Projects / Applications
- Topic: Send sensor value to the other ESP with LCD
- Replies: 15
- Views: 15547
Re: Send sensor value to the other ESP with LCD
Michal, I think that is no problem. small modification url string url: http://192.168.10.107/control?cmd=lcd,1, 8 ,%20%v%20%20% and you can write name by LCD line setup on esp. this should resolve problem (not checked by me) . If I am reading your answer correctly, this is not, what I meant. If I a...
- 16 Jan 2016, 01:36
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
Obviously force with Martinus is.BertB wrote:very happy with the new gadgets I am.
Sorry, could not resist while reading at such late hour
- 15 Jan 2016, 11:18
- Forum: ESP Easy: Projects / Applications
- Topic: SCT013 Current measuring with esp
- Replies: 18
- Views: 37458
Re: SCT013 Current measuring with esp
I use XTM18SA meters, i can not see current, but power meter working great in domoticz, using 3.3v for pulse reading(S0 pins). Connect ESP8266 gpio2 to pulse S0 directly, without any resistors to 20&21 connectors. When you are saying - connect directly, I understand, one needs to connect GPIO2 ...
- 14 Jan 2016, 17:27
- Forum: ESP Easy: Software
- Topic: ESP Easy Releases
- Replies: 345
- Views: 293519
Re: ESP Easy Releases
R64 is available for download on github, beware that it's development stuff... ... Added %uptime% as variable for display To be used for LCD/OLED display ... Added support for local button to turn on LCD/OLED display with configurable timeout For "maluko's" project... But others are also ...
- 13 Jan 2016, 19:18
- Forum: ESP Easy: Projects / Applications
- Topic: Send sensor value to the other ESP with LCD
- Replies: 15
- Views: 15547
Re: Send sensor value to the other ESP with LCD
This configuration is working for me (base on Domoticz server): url: http://192.168.10.107/control?cmd=lcd,1,1,humid:%20%v%20%20% method: post data: value=%v Although, I'd rather send value from esp directly. So if somebody have any suggestion, please let me know. I do not think it is good solution...
- 13 Jan 2016, 11:31
- Forum: ESP Easy: Software
- Topic: LCD - clear before write
- Replies: 7
- Views: 7160
Re: LCD - clear before write
Maybe using thie Event Action plugin we have discussed before, say one time during the day/night? This way, we would be able to say, if the module is stable or not? This should probably be moved to a new thread, but it would surely be great to have virtual "sensors" to report stuff like -...
- 13 Jan 2016, 11:03
- Forum: ESP Easy: Software
- Topic: LCD - clear before write
- Replies: 7
- Views: 7160
Re: LCD - clear before write
Next build will have %uptime% as system variable. Great news. And is there any way of updating Domoticz with uptime as the value of a sensor? Maybe using thie Event Action plugin we have discussed before, say one time during the day/night? This way, we would be able to say, if the module is stable ...
- 12 Jan 2016, 17:54
- Forum: ESP Easy: General Discussion
- Topic: ProMiniExtender
- Replies: 27
- Views: 38417
Re: ProMiniExtender
Does it all mean, I can connect my Arduino Pro Mini to ESP and use GPIOs from Arduino as extensions of GPIOs on ESP?
Would I be able to run my own sketch on Arduino if I enhance the ino for Arduino that is provided?
Would I be able to run my own sketch on Arduino if I enhance the ino for Arduino that is provided?
- 12 Jan 2016, 17:51
- Forum: ESP Easy: Software
- Topic: LCD - clear before write
- Replies: 7
- Views: 7160
Re: LCD - clear before write
And a feature request: I know we have %systime% - could we also have %uptime% (I understand the disabling NTP changes systime to uptime, but I would like to keep NTP enabled) - Jan I second the request, which is discussed in another thread: http://www.esp8266.nu/forum/viewtopic.php?f=2&t=625&am...