Search found 99 matches

by Wiki
13 Apr 2019, 12:31
Forum: ESP Easy: Software
Topic: Issue in Rules and sendtohttp
Replies: 8
Views: 138

Re: Issue in Rules and sendhttp

I don’t know if it works, but you can try.the following:
Download your rule to a.file
Open it using an editor
Put the SendToHTTP into one line without line wrap, save it
Goto http://<your ip>/upload and save the textfile to your device
by Wiki
10 Apr 2019, 10:23
Forum: ESP Easy: Software
Topic: Access Device Info via Raspberry Pi
Replies: 20
Views: 257

Re: Access Device Info via Raspberry Pi

Now you know, what I was talking about :mrgreen:
by Wiki
09 Apr 2019, 21:16
Forum: ESP Easy: Hardware
Topic: Sonoff POW + Hardware Watchdog
Replies: 17
Views: 359

Re: Sonoff POW + Hardware Watchdog

The new engine is still in development. But you can fill every rule set up to 2048 bytes with event handlings. In the past there has been an issue with corrupting the rule set while saving if its bigger than app. 1K. So have a look if the rules are saved correctly.
by Wiki
09 Apr 2019, 17:40
Forum: ESP Easy: Software
Topic: Access Device Info via Raspberry Pi
Replies: 20
Views: 257

Re: Access Device Info via Raspberry Pi

To simply store the data on my Raspi I have chosen to write a small php script (Apache server is installed) and placed it under /var/www/html/Data.php. Example: <?php isset($_GET['value1']) ? $value1=$_GET['value1'] : $value1=''; isset($_GET['value2']) ? $value2=$_GET['value2'] : $value2=''; $jetzt ...
by Wiki
09 Apr 2019, 11:41
Forum: ESP Easy: Hardware
Topic: Sonoff POW + Hardware Watchdog
Replies: 17
Views: 359

Re: Sonoff POW + Hardware Watchdog

Probably you shouldtry the actual nightly build. Looks like there happened something:
[RTC user var] Store read values in RTC memory to survive crash
by Wiki
08 Apr 2019, 21:00
Forum: ESP Easy: Hardware
Topic: Sonoff POW + Hardware Watchdog
Replies: 17
Views: 359

Re: Sonoff POW + Hardware Watchdog

Hi, sorry, but no, you havn't a logic like the one i posted. In your case you still depend on an event outside of the relay state, on the button. If you switch the GPIO 12 over network or however you won't notice this by using the button event. But never mind if you already tried a similar way which...
by Wiki
08 Apr 2019, 14:19
Forum: ESP Easy: Hardware
Topic: Sonoff POW + Hardware Watchdog
Replies: 17
Views: 359

Re: Sonoff POW + Hardware Watchdog

Hi, with your first rule you will loose the data of the task "Calculation" anyway, System#Boot will be triggered on warm boot, too. Instead of setting the variable for the relay state depending on a timer you should use the event Relay1#State which is fired by changing the relay state to save the se...
by Wiki
03 Apr 2019, 23:40
Forum: ESP Easy: Hardware
Topic: Blitzwolf BW-SHP6
Replies: 9
Views: 1195

Re: Blitzwolf BW-SHP6

I changed the flash from 1MB to 4 MB (Winbond) I used a new flash for SonOFF (ESP_Easy_mega-20190301_hard_SONOFF_POW_4M.bin) And it works :) Eehm, how did you add a 4M Winbond to a 8285 which is as far as I know the chip of the Blitzwolf? Do you have something like a picture? @kimote: thats exactly...
by Wiki
24 Mar 2019, 21:06
Forum: ESP Easy: Software
Topic: Ping Plugin
Replies: 25
Views: 3035

Re: Ping Plugin

You're my hero, works. Thank you.

If you stay one time in DE just come along, I'll buy you a beer (or two).
by Wiki
24 Mar 2019, 17:02
Forum: ESP Easy: Software
Topic: Ping Plugin
Replies: 25
Views: 3035

Re: Ping Plugin

mahodk wrote:
24 Mar 2019, 16:24
Was this plugin ever added to the official release?
[...]
No, thats why I was asking for a modified binary. The plugin still is on playground. My coding skills are not sufficient either, even in the past I was not able to get a running environment to compile myself.
by Wiki
24 Mar 2019, 16:58
Forum: ESP Easy: Software
Topic: Ping Plugin
Replies: 25
Views: 3035

Re: Ping Plugin

@enesbcs: "Temperature Thermocouple " doesn't work, there is no chip available to be chosen. Thermo1.JPG The plugin I was using before is named "Environment Thermocouple", there you get a dropdown to choose the chip. Thermo2.JPG But don't put too much efforts in it, I personally am fine with the fou...
by Wiki
24 Mar 2019, 12:11
Forum: ESP Easy: Software
Topic: Ping Plugin
Replies: 25
Views: 3035

Re: Ping Plugin

Hi,

you're the best. Pinging four devices works like a charme. Thank you.

Only thing thats missing now is the max6675.
by Wiki
21 Mar 2019, 16:01
Forum: ESP Easy: Software
Topic: Ping Plugin
Replies: 25
Views: 3035

Re: Ping Plugin

Hi, works pretty good, tested with the custom bin posted before. I want to try to get more stability on four critical nodes concerning the WD timeout reboots following the recommendation of TD-er on github. On the device I want to use for continuous pings I need the max6675 plugin, too. Is there any...
by Wiki
18 Feb 2019, 02:13
Forum: ESP Easy: Hardware
Topic: ESP Easy 0.96" OLED set contrast with a button on NodeMCU
Replies: 3
Views: 241

Re: ESP Easy 0.96" OLED set contrast with a button on NodeMCU

Yes, it is possible at all, pretty easy using the rules functionality of espeasy. Sorry, at this daytime I'm too tired to post a detailed example using a button, just a short example how to set the contrast depending on daytime: On Clock#Time=All,21:00 do OLEDFRAMEDCMD,low endon On Clock#Time=All,19...
by Wiki
17 Feb 2019, 19:23
Forum: ESP Easy: Hardware
Topic: Blitzwolf BW-SHP6
Replies: 9
Views: 1195

Re: Blitzwolf BW-SHP6

Due to the fact that I am one of your patreons and that I love espeasy I can understand your answer - you have a pretty ambitious goal and my respect. But its a pitty that one has to change to Tasmota for using these very useful devices. The BW-SHP2 e.g. is able to switch 3.6kW (!) and is therefore ...
by Wiki
30 Jan 2019, 11:43
Forum: ESP Easy: Software
Topic: (solved) use enable RX TX GPios for esp01S 8266
Replies: 3
Views: 205

Re: use enable RX TX GPios for esp01S 8266

Just go to Tools/Advanced and disable the serial port, so you will have the GPIO1 and GPIO3 available for your own application.
by Wiki
29 Jan 2019, 11:02
Forum: ESP Easy: Software
Topic: New rules engine
Replies: 4
Views: 441

Re: New rules engine

OK, I'll try and will report.
by Wiki
29 Jan 2019, 01:04
Forum: ESP Easy: Software
Topic: New rules engine
Replies: 4
Views: 441

Re: New rules engine

Thank you, now the example works, the naming convention makes sence in this case. But if I define my own event named "startwatering" to trigger it by http://<ip>/control?cmd=event,startwatering=1 how do I have to name the rule that it is saved without the formats error message and is running afterwa...
by Wiki
28 Jan 2019, 12:59
Forum: ESP Easy: Software
Topic: New rules engine
Replies: 4
Views: 441

New rules engine

Hi, I am trying to get the new rules engine to run. - Adding new event named rule#1 - putting inside a rule, e.g. on Clock#Time=All,**:*0 do Publish domoticz/in,{"idx":53,"nvalue":0,"svalue":"%uptime%"} endon - submitting, file "rules/rule/1.txt" is created - nothing happens, I can see. edit and del...
by Wiki
24 Jan 2019, 12:36
Forum: ESP Easy: Hardware
Topic: Blitzwolf BW-SHP6
Replies: 9
Views: 1195

Re: Blitzwolf BW-SHP6

Aditional info:

I have found the pinout of the ESP used in this smart plug here: https://github.com/arendst/Sonoff-Tasmo ... template.h

Just search the file for Blitzwolf.

I am sorry, but my coding skills are not good enough to start programming by myself.
by Wiki
23 Jan 2019, 18:36
Forum: ESP Easy: Hardware
Topic: Blitzwolf BW-SHP6
Replies: 9
Views: 1195

Blitzwolf BW-SHP6

Today I received two of these devices: https://www.banggood.com/BlitzWolf-BW-SHP6-EU-Plug-Metering-Version-WIFI-Smart-Socket-220V-240V-10A-Work-with-Amazon-Alexa-p-1356981.html?rmmds=search&cur_warehouse=CN I ordered them just for curiosity. After having managed to flash them using 1M flash size ESP...
by Wiki
23 Jan 2019, 11:28
Forum: ESP Easy: Hardware
Topic: DS18b20 hard reset ?
Replies: 1
Views: 165

Re: DS18b20 hard reset ?

The GPIO pins of the ESP8266 can easily power the few µA the Dallas needs. So I would solder the VCC pin of the Dallas to a free GPIO configured as output high and reset them by pulling the pin to low using a pulse. In my network I have several DS18B20 running using parasite power, no problems at al...
by Wiki
18 Jan 2019, 11:28
Forum: ESP Easy: Hardware
Topic: ESP01 PUYA
Replies: 2
Views: 276

Re: ESP01 PUYA

Hi,

did you try one of the firmwares from the past which still included a puya build e.g. 20181008?
by Wiki
10 Jan 2019, 20:50
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

....But the transistor is not intended to convert the logic level. It is a buffer that is used to ensure that the ESP8266 can boot-up. Without it there is a strong chance the ESP8266 will hang on a reset. Oh yes, you are right, now I remember. Sometimes there are some benefits in the procedure firs...
by Wiki
10 Jan 2019, 16:52
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

Hi,
RXD2 has to be connected to TX Nextion, TXD2 to RX Nextion.
I don't use a transistor due to the fact that the signals of the Nextion are 3.3V.
by Wiki
09 Jan 2019, 01:04
Forum: ESP Easy: Hardware
Topic: Wall switch with mechanical button?
Replies: 11
Views: 834

Re: Wall switch with mechanical button?

Hi, if you want to stay mechanical from my knowledge (and I don't konw everything) you have to go with somewhat like a shelly device - and in this case I would think, you are playing on the wrong side of IoT. But if you could imagine to go to something like touch, something like this: https://www.le...
by Wiki
07 Jan 2019, 16:01
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Finally I've got my 12 bit back. What I have done: - Deleted the Dallas in config of my Wemos - Coded a small sketch which searches the Dallas on OneWire, checks for parasite mode, setup to 12 bit, reads temperature and ends. - Flashed it to a new Wemos - Connected the new Wemos to my hardware, star...
by Wiki
07 Jan 2019, 13:57
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Ehm, what a PR? Public Relation?
by Wiki
07 Jan 2019, 11:23
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Well, now I'm lost. Resoldered the Dallas to D7(GPIO-13): No way to set resolution to 12 bit neither using 2018-05-22 nor 2018-12-20 nor 2018-12-31. Attached to the device beside the Dallas: SSD1306 OLED and INA219. Difference to the test device I was lucky to configure to 12 bit resolution: brand n...
by Wiki
06 Jan 2019, 23:44
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Hi, might be I have found a solution resp. the cause. I equipped a testing devices with a Dallas, connected to D7 (GPIO-13), choosen randomly. And it works with 2018-12-31 (normal), setting the Dallas to 12 bit, connected as parasite feeding, 3.3V. Though I am setting up a hardware upgrade to these ...
by Wiki
06 Jan 2019, 22:36
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Hi,

what the hell is going on?

I'm trying to get my resolution of 12 bit back - but seems to be no way for it.

What witchwork has been done to my device? Do I have to dismount the sensor to reprogram it for answering it is able to deliver 12bit resolution?
by Wiki
06 Jan 2019, 17:23
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Hi, don't panic :mrgreen: . I take the moment as a chance - its the right time, the monitored system itself is asleep during the next one or two weeks. Thats why I took the risk...and now the devices get a hardware upgrade (small display, other powersupply) which was planned anyway. [OT on] But if t...
by Wiki
06 Jan 2019, 16:27
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Hi, yes it does. Temperatures are only read with 0.5 steps. For my application absolutely not acceptable. I do not need the absolut correct reading but the tendence of the different curves. And that was done before and fulfilled my needs. Currently I am trying to step back to my stable installation....
by Wiki
06 Jan 2019, 12:05
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

Re: DS18B20 only 9 bit resolution

Hi, Wemos D1, 3.3V powered, fixed IP. They were running since april flawlessly, not even one WD reboot, max. uptime ca. 100-120 days. The Dallas config is 3.3V parasite, connected to D3 (GPIO-0), cable length approx. 15cm, data sent every 30sec. Additionally attached Sensors INA219 to SDA/SCL D2/D1 ...
by Wiki
06 Jan 2019, 02:53
Forum: ESP Easy: Software
Topic: DS18B20 only 9 bit resolution
Replies: 15
Views: 686

DS18B20 only 9 bit resolution

Hi, to use the meanwhile enhanced Web Gui I upgrade four Wemos D1 devices in my production from somewhat in April 2018 to the release of 2018-12-31. Attached to these devices are DS18B20 Sensors. But with the release of 2018-12-31 it is no more possible to set the resolution of the sensor to 12 bit....
by Wiki
26 Dec 2018, 18:56
Forum: ESP Easy: Software
Topic: Read temperature via web command on D1 with SHT30 installed
Replies: 12
Views: 725

Re: Read temperature via web command on D1 with SHT30 installed

Wow, that's cute.

Thank you for this information. I think this is exactly what mattlward was looking for - and at least, me, too.
by Wiki
26 Dec 2018, 14:21
Forum: ESP Easy: Software
Topic: Read temperature via web command on D1 with SHT30 installed
Replies: 12
Views: 725

Re: Read temperature via web command on D1 with SHT30 installed

Do not forget the custom web pages. Just upload an .htm file (http://ip_of_your_device/upload) that returns just the value you want and then call that file within your call url e.g. : http://<ip of you device/return1.htm -D Interesting. I didn't read about this possibility anything. Do you have som...
by Wiki
22 Dec 2018, 13:04
Forum: ESP Easy: Software
Topic: Read temperature via web command on D1 with SHT30 installed
Replies: 12
Views: 725

Re: Read temperature via web command on D1 with SHT30 installed

Just an idea how to solve your task instantly. Assuming you have a webserver running on your monitoring system just place a small php-script named survey.php on it: <?php isset($_GET['value']) ? $value=$_GET['value'] : $value=''; isset($_GET['ID']) ? $ID=$_GET['ID'] : $ID=''; $now = time(); $date = ...
by Wiki
29 Nov 2018, 14:54
Forum: ESP Easy: Hardware
Topic: ESP Easy on Sonoff S26
Replies: 16
Views: 2123

Re: ESP Easy on Sonoff S26

Hey, great, congrats and thanks for sharing this information. Meanwhile the PUYA-patch is included in the normal builds of the nightly releases, there is no special build for PUYA anymore. Tipp: Since 28th of nov. using the new builds namend ESP_Easy_mega-yyyymmdd_hard_SONOFF_POW_4M might give you t...
by Wiki
29 Nov 2018, 14:27
Forum: ESP Easy: Hardware
Topic: Sonoff pow r2 v1.0 2017-11-30
Replies: 3
Views: 577

Re: Sonoff pow r2 v1.0 2017-11-30

Good to hear that the workaround was successful. Since 28th of nov. there is a new build in the nightly release. Using the ESP_Easy_mega-yyyymmdd_hard_SONOFF_POW_4M.bin you are able to flash the POW instantly. After flashing connect to the device either by serial connection or using the AP functiona...
by Wiki
26 Nov 2018, 18:32
Forum: ESP Easy: Hardware
Topic: Sonoff pow r2 v1.0 2017-11-30
Replies: 3
Views: 577

Re: Sonoff pow r2 v1.0 2017-11-30

Hi, you're not alone. I did open already an issue on github smoe time ago, but there seems to be no further progress. As documented in the issue request I got it working by flashing at first a normal build and afterwards flashing the build for SONOFF POW R2 1024M. What a pity that following this way...
by Wiki
21 Nov 2018, 21:51
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

Which speed? Default setting of the Nextion display as well as the Nextion plugin is set to 9600.

To use 115200 baud I have added to the preinitialize event of page0 "baud=115200"
If you do so, you have to change the baud rate in your Wemos Devices Nextion from 9600 to 115200.
by Wiki
21 Nov 2018, 18:19
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

You're welcome, good to hear it works. [...] When i start the Sonoff Pow from Domoticz and i will stop it on the Nextion i must sometimes press the button twice. That's depend of the state of the variable on the Nextion. [...] I have already seen a similar behaviour of my Netxion. I think its a timi...
by Wiki
20 Nov 2018, 13:31
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

Well for me it looks like a misbehaviour of the dual state button - hard to say without knowing the protocol of the wemos, but possible. Let's try to get full control of the buttons behaviour in Nextion by the wemos. So replace the dual state button in Nextion by a normal one. If its the first butto...
by Wiki
18 Nov 2018, 17:38
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

OK, the rules on the ESP12/Sonoff seem to be correct. On your Nextion the Touch Release event should look like something like this: if(bt0.val==0) { print "|s,i99,sOff" printh 0a }else { print "|s,i99,sOn" printh 0x0a } The term "i99" is interpreted by the Nextion plugin of ESPEasy as Nextion#idx So...
by Wiki
14 Nov 2018, 14:48
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

OK, lets go. There might be a smarter solution, but I would go through rules. I assume that you have the domoticz configured as MQTT-controller in your ESP12. I assume that you have define a dual-state button in Nextion. If not already done so, define the gpio port of the relay as a device, an examp...
by Wiki
14 Nov 2018, 00:43
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

Is the Nextion connected to the same device which is switching the lights or are these two different devices? Or are the lights switched by three different devices?
by Wiki
10 Nov 2018, 10:39
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 468
Views: 90642

Re: Nextion display plugin

In general its no problem to show every information you desire on the Nextion using some rules.

But to get help you should provide more information about the infrastructure you are using.
by Wiki
06 Nov 2018, 19:06
Forum: ESP Easy: Hardware
Topic: Converting Wemo D1 Mini to 3.3V Only/Low Power
Replies: 4
Views: 1307

Re: Converting Wemo D1 Mini to 3.3V Only/Low Power

ok, now I understood. To be precise: on the page linked above there are two solutions focussing at the goal to reduce the power consumption during _deep sleep_. The ESP8266 itself consumes too much power to let it run 24/7 on battery. In both designs only the gnd pin of the uart is disconnected, so ...
by Wiki
03 Nov 2018, 00:54
Forum: ESP Easy: Software
Topic: HTML Button Code to trigger GPIO 12 (Sonoff S20)
Replies: 12
Views: 2359

Re: HTML Button Code to trigger GPIO 12 (Sonoff S20)

In theorie pretty easy. Don't trigger the device via a predefined event. Using the rules of the requested device create your own event and use SendToHTTP to send an answer with which content you ever want. Example: Request from server: http://192.168.xxx.xxx/control?cmd=event,SendState Rule on reque...