Search found 337 matches

by Wiki
13 Apr 2021, 19:00
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

For those who are interested: The Neo-7M which I've linked in the opening post is equipped with a ceramic antenna. I can tell, that the ceramic antenna is a kind of fake - no fix at no place. What I can tell: The device is delivered with a SMA connection for an active antenna. I ordered This one: ht...
by Wiki
13 Apr 2021, 15:34
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

[....] At least now I've flashed a new Wemos D1, soldered the same wires, no pull up, put on the existing config and finally I can see some data - waiting for the Neo to get a fix. The only difference: the first (up to now used) device is a Wemos D1 V3 (the one without metal shield), the one now co...
by Wiki
12 Apr 2021, 18:57
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

And this is the Neo-7M with an active antenna and working serial connection:
MurphyGPSmodulactiveAntenna.JPG
MurphyGPSmodulactiveAntenna.JPG (53.27 KiB) Viewed 2232 times
Yeah, that's what we are talking about.
by Wiki
10 Apr 2021, 22:28
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

OK, clarified, we both are talking about two different things - me about the USB connection directly to the GPS device and reading its data (it has a seperate USB plug), you about the USB connection to the Wemos.
by Wiki
10 Apr 2021, 21:58
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

Ah, and btw. as I noticed now: the Neo-7M sends the data in parallel to UART1 and USB at the same time. So its no indicator of miswiring.
by Wiki
10 Apr 2021, 21:52
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

Yes, I am sure that the connection TX Neo -> RX Wemos is (was) correct - as it was before using the Neo 6M. I didn't change anything, just desoldered the Neo 6M and nsoldered the Neo 7M. At least now I've flashed a new Wemos D1, soldered the same wires, no pull up, put on the existing config and fin...
by Wiki
10 Apr 2021, 17:38
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

Tried:
3.3V - 10.7kOhm - RX (GPIO-3 (D9)) Wemos D1 - TX Neo 7M

still no data.....
by Wiki
10 Apr 2021, 16:03
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

SW serial is not really reliable with such 'chatty' devices like a GPS ... I know, just tried a different way to check if there is any communication ... Just make it so that you can disconnect it at boot as GPIO-15 must be at a specific state during boot. ... No way, the device is placed far away f...
by Wiki
10 Apr 2021, 15:08
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

Naah, 100% success should look different
MurphyGPSmodulD4Error.JPG
MurphyGPSmodulD4Error.JPG (15.98 KiB) Viewed 2342 times
by Wiki
10 Apr 2021, 14:58
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

MurphyGPSmodulD4.JPG
MurphyGPSmodulD4.JPG (43.57 KiB) Viewed 2345 times
by Wiki
10 Apr 2021, 14:55
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

Yes, it does.

Now I've tried Neo TX -> Wemos D4, Neo RX -> none, Neo PPS -> Wemos D6, software serial. Using this configuration ESPEasy shows data.
by Wiki
10 Apr 2021, 14:03
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

Neo 7M attached with the serial connections using a FTDI232, 9600 baud, delivers the data as expected.

Reattached to Wemos D1 -> no data in GPS task.

?
by Wiki
10 Apr 2021, 13:37
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Re: Neo-7M replacement for Neo-6

Module is set to 9600 baud, enable serial is unchecked.

I doublechecked the settings of the two modules using u-blox u-center, can't find any difference. Now I will connect the serial port of Neo-7M to a FTDI232 and will report...
by Wiki
10 Apr 2021, 11:53
Forum: ESP Easy: Hardware
Topic: Neo-7M replacement for Neo-6
Replies: 23
Views: 2368

Neo-7M replacement for Neo-6

I recently replaced my Neo 6 module by a Neo-7M (This one: https://www.ebay.de/itm/NEO-7M-GPS-Satellite-Positioning-Micro-USB-Module-for-STM32-C51-Replace-NEO-6M/272676131887). The Neo-7M is attached by using the existing wires used for the Neo 6. Looking on the USB-side of the Neo-7M module it gets...
by Wiki
21 Mar 2021, 17:10
Forum: ESP Easy: Software
Topic: Sending p2p after system#boot [solved]
Replies: 5
Views: 2364

Re: Sending p2p after system#boot [solved]

The problem only occurs at first boot of the Nextion attached Wemos device - in combination with my impatience that I want to see something useful on the screen as fast as possible. Once it has sent its own broadcast successfully and received the ones from the other devices the udp cache of the last...
by Wiki
21 Mar 2021, 15:34
Forum: ESP Easy: Software
Topic: Sending p2p after system#boot [solved]
Replies: 5
Views: 2364

Re: Sending p2p after system#boot [solved]

OK, and here we are. Not very nice, but works: Booting device (ID: 28): on WiFi#Connected do Timerset,1,1 EndOn On InitDone Do TimerSet,1,0 EndOn On Rules#Timer=1 Do SendTo 63,'event,NextionInit' Timerset,1,1 EndOn Data device (ID: 63): On NextionInit Do SendTo 28,'event,InitDone' SendTo 28,....... ...
by Wiki
21 Mar 2021, 14:57
Forum: ESP Easy: Software
Topic: Sending p2p after system#boot [solved]
Replies: 5
Views: 2364

Re: Sending p2p after system#boot

I feared that this will be the answer, I know that UDP isn't reliable by design. I was hoping that there might be a hidden feature to initiate the broadcast messages in the network aside the normal 30 seconds. I am using the communication between the devices by device id because the devices are inst...
by Wiki
21 Mar 2021, 12:52
Forum: ESP Easy: Software
Topic: Sending p2p after system#boot [solved]
Replies: 5
Views: 2364

Sending p2p after system#boot [solved]

After Boot / Reboot I want to send an information to another device that this one is online again. My Nextion display interferes with the WIFI of the pretty close mounted Wemos D1 - I don't know why, but its a fact. If I try the following: On WiFi#Connected Do Timerset,1,60 EndOn On Rules#Timer=1 Do...
by Wiki
20 Mar 2021, 17:24
Forum: ESP Easy: Software
Topic: Binary request
Replies: 7
Views: 2449

Re: Binary request

Oh man, You're my very best. Thanks a lot.

Myself I am too foolish to set uop a build environment. I don't know why, but even following the tutorial on youtube doesn't work for me.

I will mention your brave action tonight in my evening prayer.
by Wiki
20 Mar 2021, 17:07
Forum: ESP Easy: Software
Topic: Binary request
Replies: 7
Views: 2449

Re: Binary request

Wow, that was fast - pretty fast.

Erm, I'm a fool, what I didn't recognize before, the generic dummy device is missing, too.

Is there a way to get it into this build?
by Wiki
20 Mar 2021, 15:54
Forum: ESP Easy: Software
Topic: Binary request
Replies: 7
Views: 2449

Binary request

Is there any way to get a binary including Nextion display, Cache controller, GPS, MPu6050, INA219 and BME280?


[edit]

Erm, and the 4M2M splitting?

[/edit]
by Wiki
15 Feb 2021, 15:14
Forum: ESP Easy: Projects / Applications
Topic: Calculating absolute humidity out of rules
Replies: 11
Views: 14338

Re: Calculating absolute humidity out of rules

Update: using the formula abilities of ESPEasy since release of 2021-01-14 the calculation of the absolute humidity may look like this: On FTemp Do TaskValueSet,4,1,(6.112*(exp((17.67*%eventvalue1%)/(243.5+%eventvalue1%)))*%eventvalue2%*2.1674)/(273.15+%eventvalue1%) Publish domoticz/in,'{"idx&...
by Wiki
14 Feb 2021, 10:48
Forum: ESP Easy: Software
Topic: Wemos D1 Mini Flash with latest ESP Easy
Replies: 4
Views: 2822

Re: Wemos D1 Mini Flash with latest ESP Easy

Erm, I am using the latest version of ESPEasy on two devices without any problem. The difference is that I updated them from an earlier version using OTA flash. Probably you could try this way? Another idea: make a clean device flashing at first the blank_4M.bin included in the package and then try ...
by Wiki
26 Jan 2021, 11:55
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 511
Views: 310482

Re: Nextion display plugin

TD-er wrote: 26 Jan 2021, 11:48 Don't use %v1%=[Nextion#value]/10
But use the "let" command for this:

Code: Select all

  let,1,[Nextion#value]/10
  
Erm, yes, of course, sorry, my old brain just didn't remember the needs of ESPEasy at the moment
by Wiki
26 Jan 2021, 11:46
Forum: ESP Easy: Software
Topic: Nextion display plugin
Replies: 511
Views: 310482

Re: Nextion display plugin

Just let the Wemos do the work of calculating the 0.5 values. Something like: va0.val=va0.val+5 if(va0.val>250) { va0.val=150 } print "|u,i230,n,s" print va0.val printh 0a Rule in ESPEasy On Nextion#Idx=230 %v1%=[Nextion#value]/10 //Send value to Domoticz however you want Nextion.page0.t1....
by Wiki
11 Jan 2021, 19:46
Forum: ESP Easy: Projects / Applications
Topic: Help: A guide for a battery powered measuring station
Replies: 16
Views: 6384

Re: Help: A guide for a battery powered measuring station

As I can see in the picture, you still have the serial ncontroller connected. Shouldn't do that as it consumes too much of energy.

Have a look over here: viewtopic.php?f=5&t=5498#p32183 where I posted some experiences on how to save battery power.
by Wiki
22 Dec 2020, 01:09
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Which security settings for WLAN did you choose? My experiences showed me, that the stability may depend on them. And good luck til next reboot of the box. Returning home I just rebooted the 7590 (fw 7.21, no wifi communication at all) here at home, WLAN back again and useable.(??) Today evening I r...
by Wiki
19 Dec 2020, 23:26
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

No way to downgrade the fw of Fritz without having it connected to your PC using LAN interface. Even choosing another LAN port than No. #1 on your Fritz may result in a faulty downgrade. Believe me, I'ver spent half a night to get it done. And you will be not able to import a backup of your Fritz do...
by Wiki
19 Dec 2020, 12:27
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Ha! And I knew, why I did put the total surveillance time into a dummy variable. Have a look at the uptimes:
Unbenannt4.jpg
Unbenannt4.jpg (32.14 KiB) Viewed 9774 times
During saving the rule happened:
Unbenannt5.jpg
Unbenannt5.jpg (32.83 KiB) Viewed 9774 times
by Wiki
19 Dec 2020, 12:17
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Erm, not quite awake today morning, has been a long night: on Clock#Time=All,**:*0 do Publish domoticz/in,'{"idx":24,"nvalue":0,"svalue":"%uptime%"}' Let 1,[MQTTCounter#Uptime] TaskValueSet 1,2,[VAR#1]+10 endon on MQTT#Disconnected do Let 1,[MQTTCounter#Sum] T...
by Wiki
19 Dec 2020, 12:15
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

This will work as desired? on Clock#Time=All,**:*0 do Publish domoticz/in,'{"idx":24,"nvalue":0,"svalue":"%uptime%"}' Let 1,[MQTTCounter#Uptime] TaskValueSet 1,2,[VAR#1]+10 endon on MQTT#Disconnected do Let 1,[MQTTCounter#Sum] TaskValueSet 1,1,[VAR#1]+1 Let 1,...
by Wiki
19 Dec 2020, 12:01
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

OK, thank you.

Could you give me an idea how to setup a customdevice in Domoticz to trace more than one datafield? Up to now I use Domoticz "as is" with no customization.
by Wiki
19 Dec 2020, 11:48
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

No, up to now the data reside in the memory of the two devices. But no problem, I will do so.

Publishing out of rules will go through the controller loop, too?
by Wiki
19 Dec 2020, 11:30
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Erm, concernig stability, at home I had a lot of devices with stability problems. Even if the devices in my network at home are almost unaccessible I can testify, that one the last releases flashed by me could be named as rock solid: Unbenannt2.jpg I just took this snapshot of one of the devices whi...
by Wiki
19 Dec 2020, 11:20
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Over night I had two devices monitoring MQTT Disconnects, showing the sum of MQTT disconnects over uptime in minutes: Unbenannt1.PNG Unbenannt.PNG Because I've never traced something like this before I don't have any experiences, whether these results are normal or acceptable, but far way better tha...
by Wiki
19 Dec 2020, 01:51
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

[OT on] At this time I am one of the rare lucky ones who is almost not (or better: no more) affected by Corona in daily routines. In spring during first Corona my mother was still alive and I had to take care about her, searching a care home and arrange all her daily things - and all this during the...
by Wiki
18 Dec 2020, 16:47
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Because its boaring watching the web log I've set up a small rule: on Clock#Time=All,**:*0 do Publish domoticz/in,'{"idx":24,"nvalue":0,"svalue":"%uptime%"}' Let 1,[MQTTCounter#Uptime] TaskValueSet 1,2,[VAR#1]+10 endon on MQTT#Disconnected do Let 1,[MQTTCounte...
by Wiki
18 Dec 2020, 11:15
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

I've tried out the 7.24 (labor build) - no difference at all. And yes, I felt to have recognized that at least the time between starting the WLAN on the phone and a working connection is sometimes a question of a few seconds with 7.21. With 7.01 it feels almost instantly. Not every MQTT disconnect a...
by Wiki
18 Dec 2020, 00:32
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Re: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Puuh, if I had known before I would had thought twice about doing that, downgrading a fritzbox. All settings gone, I had to flash twice, seven smart thermostats had to be readded, telephone book gone. No way to read the backup file from fw 7.21. But now the 7490 is back to fw 7.01. With WLAN securit...
by Wiki
17 Dec 2020, 11:59
Forum: ESP Easy: Hardware
Topic: Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]
Replies: 29
Views: 9879

Wifi problems after upgrade of Fritzbox 7590 to FritzOS 7.21 [seemed to be solved?]

Hi, I am working in two different locations, one with 35 ESPEasy + 10 Tasmota devices, one with three ESPEasy + 7 Tasmota devices. In one of the locations I changed the router from Telekom Speedport W925 to Fritzbox 7490. The Fritzbox 7490 had firmware 7.21 installed, the Fritzbox 7590 at home 7.01....
by Wiki
15 Dec 2020, 21:05
Forum: ESP Easy: General Discussion
Topic: %eventvalue%
Replies: 9
Views: 6188

Re: %eventvalue%

TD-er wrote: 12 Dec 2020, 23:22
Wiki wrote: 12 Dec 2020, 23:08 [OT On]
Voyager?
[/OT Off]
Delta quadrant?
I don't get it...
Totally Off Topic, no relation to ESPEasy or the topic itself. Maybe uxhamby may understand.
by Wiki
12 Dec 2020, 23:08
Forum: ESP Easy: General Discussion
Topic: %eventvalue%
Replies: 9
Views: 6188

Re: %eventvalue%

[OT On]
Voyager?
[/OT Off]
by Wiki
29 Oct 2020, 12:01
Forum: ESP Easy: General Discussion
Topic: Wake on Lan?
Replies: 34
Views: 14932

Re: Wake on Lan?

Ah, What I did forget:

The IP range of the Fritzbox I have to deal with here is the same as my guest WLAN network at home. So Windows 7 of my Laptop identified automatically the wired connection here as a public network.
by Wiki
29 Oct 2020, 11:57
Forum: ESP Easy: General Discussion
Topic: Wake on Lan?
Replies: 34
Views: 14932

Re: Wake on Lan?

Well, I've worked for tens of years using WOL and I never managed to enable a WLAN device to accept magic packets during sleep/shutoff. So I personally will never ever try to wake up a WLAN device, for me for using WOL a wired connection is a must have. My problem here is that I have to deal with a ...
by Wiki
29 Oct 2020, 10:33
Forum: ESP Easy: General Discussion
Topic: Wake on Lan?
Replies: 34
Views: 14932

Re: Wake on Lan?

... @Wiki, I'm looking forward to your feedback ... And here we are. After a lot of work internally on my network, today for the first time I was able to get a WOL magic packet through my Fritzbox. I can't exactly explain, what I had to do to make it work, but main reasons seemed to be some "s...
by Wiki
25 Oct 2020, 07:55
Forum: ESP Easy: General Discussion
Topic: Wake on Lan?
Replies: 34
Views: 14932

Re: Wake on Lan?

Resetting the Fritzbox by using AVM's tool isn't possible, it stops with the message that there is a provider specific configuration on it. What a mess... Well, I try to wakeup the Laptop, which is connected to a lan port of the Fritz, running Win7. The PC on Wlan is only to be able to doublecheck E...
by Wiki
24 Oct 2020, 16:39
Forum: ESP Easy: General Discussion
Topic: Wake on Lan?
Replies: 34
Views: 14932

Re: Wake on Lan?

Yes, all your explanations I know, the devices are all directly connected to the box, the PC and ESPEasy by Wlan, the Laptop by ethernet cable, no firewalls, no routing, no guest net. I just did't get so far to test ESPEasy, I just don't get any magic packet through the router - pretty strange. The ...
by Wiki
24 Oct 2020, 12:43
Forum: ESP Easy: General Discussion
Topic: Wake on Lan?
Replies: 34
Views: 14932

Re: Wake on Lan?

I had to return as fast as possible to the location where I didn't have any WOL capable device but I carried a Laptop with me, Lenovo X201, and additionally an old Fritz Box 7272. Using the tools you've linked I don't get any WOL Magic packet through one of my routers. Neither using the WOL tool nor...