Thx !!
worked perfect
acted litle strange on the other build so i put an empty 2mb flash first before the new one .
i haven´t find out what temp sensor it is yet.

/ Tage

what i understand is HLW8012/BL0937 or plugin P076 under test builds?
and there is only 4mb flash there?
i have no problem to use smaller builds just a little hard when programing the shelly.

/Tage

Hi i have put espeasy to a shelly plug s https://shelly.cloud/shelly-plug-s/ and got most of it to work used this guide when flashed https://faulty.cloud/blog/shelly-plug-s-pinout i used this firmware https://www.letscontrolit.com/forum/viewtopic.php?t=6681 only one i have found with hlw8012/bl0937 ...

I put that in shelly plug s but how to use led and temp sensor?
/rage

there is not mutch schematic. Between ground and gpio 0 (d8 on wemos d1) Generic - Pulse counter, counter type : delta/total, mode type : rising. tried diffrent Debounce Time (mSec): but cant find any diffrent. right now it is set to 5000 . i have also try to set it as Switch input - Switch and when...

the counter is not working good. it is counting even if no rain. My guess is the cable is to long and make noises or something (5 meters).
i have try to put it as a switch and that seems to work (on/off) but then i loose the counter and need to find a way to make it count and put it in domoticz..

Hi. I have connect one rain gauge to my wemos D1 and use generic pulse counter but im wondering how you guys do when need to reboot or if the esp lost power and reboot by it self. All values are back to zero and that is no good for virtual rain sensor in domoticz . Usual the 433mhz weather station c...