Search found 36 matches

by dannybloe
31 Mar 2019, 19:06
Forum: ESP Easy: General Discussion
Topic: Wifi seems to be dead.. how to get the config (r120)
Replies: 6
Views: 720

Re: Wifi seems to be dead.. how to get the config (r120)

The backup as wifi is not working anymore, including AP mode.
by dannybloe
31 Mar 2019, 17:00
Forum: ESP Easy: General Discussion
Topic: Wifi seems to be dead.. how to get the config (r120)
Replies: 6
Views: 720

Re: Wifi seems to be dead.. how to get the config (r120)

Thanks a lot Thomas, that worked like a charm!

Danny
by dannybloe
27 Mar 2019, 06:51
Forum: ESP Easy: General Discussion
Topic: Wifi seems to be dead.. how to get the config (r120)
Replies: 6
Views: 720

Re: Wifi seems to be dead.. how to get the config (r120)

Unfortunately that doesn't work. I rebooted the thing several times (remove power) and that didn't work. I do get serial connection but I have no idea how to get some useful information from the esp. Thing is that it had some unusual pin-configurations and I kinda forgot what it was :? Hence my ques...
by dannybloe
26 Mar 2019, 17:49
Forum: ESP Easy: General Discussion
Topic: Wifi seems to be dead.. how to get the config (r120)
Replies: 6
Views: 720

Wifi seems to be dead.. how to get the config (r120)

Howdee folks, Of all my ESPEasy's in my house there is one running old r120 software and no backup. Turns out it won't connect to wifi anymore but it seems it still runs. I can connect to it using the serial interface and indeed it seems it cannot find any ssids so I assume the wifi of the board (Lo...
by dannybloe
15 Jun 2018, 20:46
Forum: ESP Easy: Software
Topic: ESP-01 Deep Sleep Settings
Replies: 11
Views: 5346

Re: ESP-01 Deep Sleep Settings

I find this deep-sleep settings confusing as well. The wiki clearly states that it will take readings on all sensors and then go back to sleep. As travorjdaniel is saying as well, I just want the esp to go back to sleep as soon as it has broadcasted all sensors. Isn't it better then to have a settin...
by dannybloe
19 Jul 2017, 08:50
Forum: ESP Easy: General Discussion
Topic: Forum search could be a lot better (actually broken now)
Replies: 1
Views: 673

Forum search could be a lot better (actually broken now)

Hiya folks, After having been 'away' for a while I have to refresh my memory regarding configuring my esp. Unfortunately searching this forum turns out to be a real pain. I searched for (without the quotes): 'ntp server', 'time server', 'send data' :roll: the forum didn't allow me to search using an...
by dannybloe
17 Feb 2016, 21:30
Forum: ESP Easy: General Discussion
Topic: MQ2 smoke/gas detector support?
Replies: 15
Views: 12673

Re: MQ2 smoke/gas detector support?

See my schema above. You can use a voltage divider and connect that to the ESP.
by dannybloe
17 Feb 2016, 13:31
Forum: ESP Easy: Software
Topic: ESP Easy Releases
Replies: 345
Views: 114481

Re: ESP Easy Releases

/me cheers
by dannybloe
11 Feb 2016, 20:38
Forum: ESP Easy: Software
Topic: Incorrect PID with R78
Replies: 5
Views: 1987

Re: Incorrect PID with R78

I did flash the 4096 version. Tried it twice and restarted the board. No luck.
by dannybloe
11 Feb 2016, 15:03
Forum: ESP Easy: Software
Topic: [Solved] ESP Easy R78: build from source code failed
Replies: 24
Views: 7253

Re: ESP Easy R78: build from source code failed

dannybloe wrote:Anyway, indeed I figured out how to do this already.. flashing went well however..
...
No success :( It keeps rebooting.
Moved this slightly off-topic post to it's own: http://www.esp8266.nu/forum/viewtopic.php?f=6&t=805.
by dannybloe
11 Feb 2016, 15:02
Forum: ESP Easy: Software
Topic: Incorrect PID with R78
Replies: 5
Views: 1987

Incorrect PID with R78

Hi folks, I saw there's a binary available for R78 so I thought to give it a try. Flashing went well but I get this dump and it keeps rebooting: load 0x4010f000, len 1264, room 16 tail 0 chksum 0x42 csum 0x42 ~ld ªU PID:1396788294 Version:1394621000 INIT : Incorrect PID or version! RESET: Reboot cou...
by dannybloe
11 Feb 2016, 14:52
Forum: ESP Easy: Software
Topic: [Solved] ESP Easy R78: build from source code failed
Replies: 24
Views: 7253

Re: ESP Easy R78: build from source code failed

Anyway, indeed I figured out how to do this already.. flashing went well however... load 0x4010f000, len 1264, room 16 tail 0 chksum 0x42 csum 0x42 ~ld ªU PID:1396788294 Version:1394621000 INIT : Incorrect PID or version! RESET: Reboot count: 1 FLASH: Erase Sector: 92 FLASH: Erase Sector: 93 FLASH: ...
by dannybloe
11 Feb 2016, 14:51
Forum: ESP Easy: Software
Topic: [Solved] ESP Easy R78: build from source code failed
Replies: 24
Views: 7253

Re: ESP Easy R78: build from source code failed

tozett wrote::D
real engineers using mac?
:D
or linux? than they know-how?
The moment I wrote this sentence I knew someone was going to say this. LOL.
by dannybloe
11 Feb 2016, 14:17
Forum: ESP Easy: Software
Topic: [Solved] ESP Easy R78: build from source code failed
Replies: 24
Views: 7253

Re: ESP Easy R78: build from source code failed

Are there still people using Windows??? Amazing... so, would be nice for the real engineers among us to update the wiki and explain how to upload R78 to an ESP without Windows.. Like Linux, Mac etc etc. :)
by dannybloe
05 Feb 2016, 12:51
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

Exactly... it is very accurate and doesn't seem to miss anything. Regarding an unresponsive Domoticz.. I hope that the ESP's internal buffered count is only reset to 0 when the json call to Domoticz returns an OK. In all other cases it should keep counting until the next successful Domoticz update. ...
by dannybloe
02 Feb 2016, 19:22
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

I have the stuff working right now. Interesting to see how much water you actually use... quite confronting :shock:
by dannybloe
02 Feb 2016, 08:14
Forum: ESP Easy: General Discussion
Topic: Feature Request collection/list
Replies: 197
Views: 82518

Re: Feature Request collection/list

And set it to the same interval as the sensor delay setting :)
by dannybloe
01 Feb 2016, 17:43
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

Yes, indeed. I started reading into this and I think you are right. I'll switch it to another pin. Thanks for the info.
by dannybloe
01 Feb 2016, 17:01
Forum: ESP Easy: Software
Topic: Installing non-stable releases.. how?
Replies: 4
Views: 1202

Re: Installing non-stable releases.. how?

kr0815 wrote:First install the stable release, then copy the Github files over the stable ones
Ah.. so that is the trick :)
by dannybloe
01 Feb 2016, 16:55
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

Hi Danny, One problem you may encounter when using an esp-1 is that both gpio0 and gpio2 inputs are used at reset to determine how to restart. I used esp-12e on a little pcb where gpio4 and gpio5 are on the pins where esp-1 has gpio0 and gpio2. With the latest ESPeasy versions I can now also use OT...
by dannybloe
01 Feb 2016, 08:16
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

Yeah, when my setup is working properly I'll try to write some paragraphs there. Unless someone else is ahead of me :)
by dannybloe
01 Feb 2016, 07:59
Forum: ESP Easy: Software
Topic: Installing non-stable releases.. how?
Replies: 4
Views: 1202

Installing non-stable releases.. how?

Ok, so here is perhaps a dumb question: how can you install one of the non-stable (youngest) releases? I see the github repo but if I download that and open it in Arduino IDE it gives me errors for missing libs. So I guess that's not how you do it. I can't find any doc telling how to get such a rele...
by dannybloe
31 Jan 2016, 17:11
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

To reply myself. I figured out that one cycle on the meter is exactly 1 liter (0,001m3). So I assume that it generates 2 pulses (from no reflection > metallic disk > no reflection). I cannot verify that easily because the meter is covered by the sensor board when it is all in place. So, in ESPEasy I...
by dannybloe
31 Jan 2016, 15:25
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

Ok, I think I have a test setup working now for my water meter.

@Bob, how did you exactly configure stuff in ESPEasy and Domoticz for the water meter? Formula's, dividers etc? Like how do you make sure the counting is counting the right stuff?

Thanks
Danny
by dannybloe
29 Jan 2016, 23:00
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

Re: pulse counter with CNY70

Wow.. that looks good.. you r0ck! I'm gonna try that.
by dannybloe
29 Jan 2016, 14:48
Forum: ESP Easy: Hardware
Topic: pulse counter with CNY70
Replies: 25
Views: 16942

pulse counter with CNY70

Hi folks, I could use some tips. I'm considering to build a pulse counter for my water meter using a CNY70 ( http://www.vishay.com/docs/83751/cny70.pdf ) based on what Jasper is describing ( http://jasper.sikken.nl/gwemeter/index.html ): http://jasper.sikken.nl/gwemeter/water.png However, following ...
by dannybloe
27 Jan 2016, 16:15
Forum: ESP Easy: General Discussion
Topic: what's coming? and some ideas
Replies: 25
Views: 9776

Re: what's coming? and some ideas

Well, ok. If that's the way ahead then indeed there is a memory limitation. Unless you provide a service as they did for nodemcu.
by dannybloe
27 Jan 2016, 15:23
Forum: ESP Easy: General Discussion
Topic: what's coming? and some ideas
Replies: 25
Views: 9776

Re: what's coming? and some ideas

But do you need such a service. In our case we have Arduino IDE. I'd say you load a custom config file, comment out the modules you don't need and then compile and transfer to the esp. Isn't it just a matter of skipping some INCLUDEs?
by dannybloe
26 Jan 2016, 09:00
Forum: ESP Easy: Projects / Applications
Topic: Network traffic LED
Replies: 3
Views: 1408

Network traffic LED

Hi folks, Is it somehow possible to have an LED connected to the ESP that is on during communication (http/wifi)? Or Off. I have a box in which the esp is placed but it would be nice to have some outward LED that shows the device is on and there is activity (either using one or two LEDs). Cheers, Da...
by dannybloe
25 Jan 2016, 15:31
Forum: ESP Easy: General Discussion
Topic: what's coming? and some ideas
Replies: 25
Views: 9776

Re: what's coming? and some ideas

In the mean time, we have almost hit the 434kB barrier (on 512k ESP modules) with the ESP Easy project, so we have reached the limit on most of the current ESP modules out in the field. So that leaves us without much room for a decent roadmap. Maybe only a few small plugins to go... Isn't it possib...
by dannybloe
15 Jan 2016, 16:16
Forum: ESP Easy: General Discussion
Topic: MQ2 smoke/gas detector support?
Replies: 15
Views: 12673

Re: MQ2 smoke/gas detector support?

I wonder if we need special treatment here. The MQ2 needs to warm up and requires some threshold. But maybe you can already configure that.
And what about the controlling the piezo? You would need some pulsating trigger here.
by dannybloe
15 Jan 2016, 09:43
Forum: ESP Easy: General Discussion
Topic: MQ2 smoke/gas detector support?
Replies: 15
Views: 12673

Re: MQ2 support?

Tried to add another attachment to my post but somehow it doesn't let me...
by dannybloe
15 Jan 2016, 09:43
Forum: ESP Easy: General Discussion
Topic: MQ2 smoke/gas detector support?
Replies: 15
Views: 12673

MQ2 smoke/gas detector support?

Howdee folks, Are there any plans to support the MQ2 smoke detectors? I little while ago I experimented with them and they work pretty well. I was planning to have multiple sensors in the house with MQ2s all with loud piezo buzzers. I made some code in Lua that allowed a sensor to send an alarm to d...
by dannybloe
04 Jan 2016, 12:08
Forum: ESP Easy: General Discussion
Topic: Soil Temperature/Moisture Sensor Probe (SHT10)
Replies: 4
Views: 1911

Re: Soil Temperature/Moisture Sensor Probe (SHT10)

That would be really cool. I plan to make a soil sensor this summer for the garden.
by dannybloe
18 Dec 2015, 14:36
Forum: ESP Easy: Software
Topic: Omitting errors from DS18B20 sensors
Replies: 0
Views: 779

Omitting errors from DS18B20 sensors

Hiya folks, Last night I put my first EspEasy board to the test holding two DS18B20 sensors in series measuring water flow temperature in my heating system at home. So far so good. I think though that I didn't connect the sensors 'clean' enough because sometimes it registers the notorious 85C readin...